aarke A1240-1253 Electric Kettle User Guide

: June 13, 2024
: aarke

Table of Contents

aarke A1240-1253 Electric Kettle User Guide
- Important safeguards
- Operating Your Product
Documents / Resources
Read User Manual Online (PDF format)
Download This Manual (PDF format)

aarke A1240-1253 Electric Kettle User Guide

Kettle

User Guide & Safety Instructions

Parts

Operation

INSTRUCTION MANUAL

Aarke ELECTRIC KETTLE 1,2L / fl oz 40,6
Model A1240-1253

PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE USE.
SAVE FOR FUTURE REFERENCE.

Graphics and drawings in this manual are solely for illustration purposes and are subject to variations from actual product.

Components

A Lid
B Jug
C Handle
D Lid opening button
E Power base
F ON/OFF and temperature setting button
G Pouring spout
H Limescale filter
I Temperature indicators
J Power cord

Important safeguards

This appliance is for domestic household use only, it is not suitable for commercial use. When using electrical appliances, basic safety precautions should always be followed to avoid fires, electric shocks, burns, or other injuries and damage. Read these operating and safety instructions carefully. Contact our customer service for information on examination, repair, and adjustments; do not attempt to repair the appliance yourself.

Read all instructions

This appliance can be used by children aged from 8 years and above if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved. Cleaning and user maintenance shall not be made by children unless they are older than 8 and supervised.
Keep the appliance and its cord out of reach of children aged less than 8 years.
Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. If children are present while the appliance is in use, keep them a safe distance away.
Use the appliance according to this instruction, any misuse may cause electric shock or other hazards.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
The appliance is only to be used with the power base provided.
This appliance is intended to be used in household and similar applications such as:
- staff kitchen areas in shops, offices and other working environments;
- Farmhouses;
- by clients in hotels, motels and other residential type environments;
- bed and breakfast type environments.
Do not operate the appliance if damaged, after an appliance malfunctions or it has been damaged in any manner.
Avoid spillage on the connector.
Heating element surface is subject to residual heat after use.
This appliance is not intended to heating liquid other than water. Only fresh, filtered, cold water should be used in the appliance. Do not use hot water.
Do not use the appliance if it has a loose or damaged handle.
This appliance must be plugged in to an earthed socket outlet.
Before you connect the appliance to the mains power supply, make sure that the voltage indicated on the rating plate, located on the bottom of the appliance matches the voltage in your home. If it does not, contact your dealer and do not use the appliance.
The appliance will switch off automatically when the water has reached set temperature. If you want to stop the heating process before the appliance automatically switches off, press the button on the base.
The appliance is designed to disconnect the live electrical supply from the element abnormal operating conditions. If the appliance is accidentally switched on without water, the boil dry protector will operate.
If the appliance ever boils dry, the power indicator will go out. Allow 15 minutes to cool before refilling with cold water. The safety cutout will automatically reset during this time.
Place the appliance on a stable flat surface.
Always fill the appliance with water before switching it on. Never fill in water more than the maximum acceptable water level. If the appliance is overfilled, boiling water may be ejected.
Do not use this appliance outdoors or in damp areas.
Ensure that the appliance is switched off before removing it from its base.
Do not remove the appliance from its power base during operation.
Never immerse the appliance or cord in water or any other liquid. Do not allow liquid to penetrate the electrical parts of this appliance.
Prevent children from pulling on the mains cord or knocking the appliance over.
Ensure that the mains cord does not overhang the worktop surface.
The outside surface of the appliance may get hot during use, please take care when using the appliance and use intended handle or buttons.
Never use the appliance with the lid open.
To disconnect the appliance, first turn the appliance off then remove the plug from the wall outlet. Do not pull on the cable to disconnect from mains supply and do not unplug with a wet hand.
Do not open the lid when steam is coming out of the spout.
Do not use the appliance with walls and furniture, in case of damaging the walls and furniture by steam.
Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance.
Do not clean the appliance with abrasive cleansers, steel wool pads, or other abrasive material. How to clean the surfaces in contact with food, please refer to section .
Do not place the appliance on or near a hot electric or gas burner, or in a heated oven.

Operating Your Product

Before first use

Remove packaging materials, labels, and stickers from the appliance, except for the rating label located under the appliance and power base. Clean the appliance by filling it with clear, cold water to the ”MAX” level mark. Turn the appliance on to allow the water to boil. Let the appliance cool down for 5 minutes before repeating the process. Boil water in the appliance at least 2 times before boiling water for drinking and wipe with damp cloth.

Using the product

➀ Connect the appliance to the mains power supply.

➁ Press the lid opening button to open the lid and fill up the appliance with the desired amount of water. Make sure you do not fill below minimum or above the internal maximum filling level mark.

➂ Close the lid and make sure it snaps in correctly.

➃ Place the appliance on the power base.

➄ Press the power base button to activate it. Press the button repeatedly to toggle through the temperature settings and stop when the light is at the desired option.

➅ 3 seconds after selecting the temperature the appliance will start heating the water, which is indicated by the selected temperature light starting to pulsate.

➆ When water reaches the desired temperature setting, the light will stop pulsating and become stable and the unit will make a beeping noise.

➇ After 10 seconds the light will dim and continue to display the current temperature as the water cools.

PLEASE NOTE!

The heating process can be stopped at any time by pressing the power base button or lifting the appliance from the power base.
Caution! The upper part of the appliance becomes hot during and after boiling.
Beeping notifications can be enabled and disabled by long pressing the power base button. Enabled notification will be indicated by a double beep and disabled notification by one single beep.
Make sure that your local water quality is approved for drinking without boiling or boil the water first and let it cool down to right temperature. Be aware that the reached temperature may vary depending on water level in the appliance and local circumstances. Always double-check temperature manually if serving your baby.

Cleaning and maintenance

Proper cleaning and care when necessary will ensure years of service from this appliance.

Clean it after use for each time.

Always unplug the appliance and make sure sufficient cooling down before cleaning.
Do not immerse the appliance in water when cleaning.
Use a soft, damp cloth to clean the outside of the appliance. Do not clean the appliance with abrasive cleansers, steel wool pads, or other abrasive materials.
Re-install the appliance on its base after cleaning and drying.

Descaling the prodcut

We recommend that you descale your appliance once every two months. Prepare descaling solution to descaler manufacturer’s specification in separate container, fill the appliance and boil. Clean the appliance by filling it with fresh, filtered, cold water to the MAX line. The descale filter can be removed and put into the dishwasher machine or cleaned by hand.

Lime filter cleaning

Press the tab to unlock the filter and remove it.
Clean the filter with regular dish soap or put it in the dishwasher.
Insert the hooks into the slots and push the tab upwards to lock the filter in place.

Disposal

This symbol on the product or on its packaging indicates that the product may not be treated as household waste. To recycle your product, please take it to an official collection point that can remove and recycle electric parts in a safe and professional way. Follow your country’s rules for the separate collection of electrical products.

Customer care and service

When contacting Customer Service, ensure that you have the following data available: Model and serial Number. The information can be found on the rating plate. Due to the Aarke policy of continual product development; specifications, colours, and details of our products and those mentioned in this manual are subject to change without notice.

Troubleshooting

For troubleshooting please contact customer support, [email protected], or scan the QR code.

Aarke reserves the right to change products, information and specifications without notice.