MAHLE iWoc Trio Remote ANT Round Connector User Guide
- June 13, 2024
- MAHLE
Table of Contents
iWoc TRIO
Quick Use Guide
v.2.2
Charging the Battery
Connect the charger first to a power outlet and then to the charging port on
the bicycle.
The light on the iWoc® TRIO will turn on automatically. While charging, the
intensity of the LED will vary cyclically, indicating by color the current
level of battery charge. The battery will be charged (>98%) when the LED
remains itin white.
MAHLE SmartBike App
MAHLE SmartBike APP provides you an advanced level of interaction with your e-bike, knowing its status and recording your training from your mobile. New functionalities: Better Data & Visualization, Dark Mode, Biometric Authentication, Dashboards, Range Extender screen, customizable Motor Maps and many more.
Component Maintenance
A. Top Button
B. Bottom Button
C. Middle Button
D. Led RGB
E. System Start
F. Demo Mode
G. System OK
H. Safe Mode| I. Bluetooth Operation
J. Notification
K. Battery Charge Level
L. Assistance Level
M. Assistance Levels
N. Turn On/Off Lights
P. Walk Mode
---|---
The components of your eBike are associated with your frame number. If a
component is replaced, it must be linked to your bike through a special system
available at all technical service centers and shops authorized by your brand.
Visit one of these points to complete the purchase and replacement operation.
The components of your e-bike are designed to be used in poor weather
conditions, such as rain and snow, and are protected against splashing, but
not against immersion or pressurized water.
It is important when transporting your eBike outside on a car or camper to
properly protect the bike, or at least the most delicate electronic parts,
such as the remote control, display and USB port, witha tarp. Keep the remote
control free of dust and water. Never use pressurized water systems on the
surface of the battery, motor, remote control, display or charging port.
-
TURNING ON AND OFF THE BICYCLE’S ELECTRICAL SYSTEM
-
CHANGING THE LEVEL OF ASSISTANCE
A short press of button A willincrease the level of assistance. A short press of button B decreases the level of assistance.
-
TURNING ON/OFF THE LIGHTS
Short press the button and while the LED is blinking, long press the button. The LED will light up in YELLOW to confirm you want to turn on/offthe lights.
-
WALK MODE
By pressing and holding down the B button, the LED will fash WHITE, and the bicycle willadvance at a constant speed of 5km/h, as long as the button remains depressed.
-
BLUETOOTH PAIRING AND NOTIFICATIONS
| When the bicycle is tumed on, the system automatically connects to the closest telephone with an activated Bluetooth® connection. The connection or disconnection is confirmed when the LED lights up briefly in BLUE.
---|---
| If you receive a notification (call, etc.) on your telephone while connected via Bluetooth®, the RBG LED willlight up in LIGHT BLUE for afew moments. -
SYSTEM ERROR AND SPECIAL MODES
****| If the RGB LED remains it in PINK the bike is in SAFE MODE. Take it to your
neareststore to diagnose the problem.
---|---
| If the RBG LED blinks constantly in PINK, there is an error in
the system.
Connect your mobile terminal by Bluetooth® to see a detailed description or
visit an authorized store for more information on the error. If the problem is
serious, the system may stop providing assistance.
| The bicycle is in DEMO MODE and can only be ridden for 50 KM.
This mode can only be deactivated by an authorized store. The
second blinking inthis mode indicates the current battery level.
MAHLE SmartBike User Web App
If you need better data, visualization and a dynamic experience, the web app enables youto manage functionalities as Privacy Zones and Locate my e-bike and analyze the foutes in detail to graphically compare data as: elevation, health-related data and exclusive metrics from the e-bikes and the tour on the maps and share it through third platforms as STRAVA™, Facebook or Twitter.