FALCON F360 Dual HD Mirror Cam Video Recorder Owner’s Manual
- June 13, 2024
- Falcon
Table of Contents
Dual HO Mirror Cam Video Recorder
Thank you for your purchase of the Falcon Zero© Falcon360HD™ . Please keep this booklet for future reference. Getting started off we have Quick Setup and Advanced Setup. The F360 is already programmed (except time/date) for you. All the optimal settings are on and after the date/time is set up, all you need to do next is just simply install the F360 inside your vehicle. Advanced Setup will show you other settings and functions as well as how to preview videos on the built in LCD.
Quick Setup
Insert your SD card; it is strongly recommended that it’s a Class 10 due to the amount of data transfer between the F360 and the card. If the F360 prompts an “SD Card Error” message, this is most likely due to the card inserted either not being sufficient or you have not formatted the SD card, which is necessary before usage. *#To Format your card see page 17
Plug in the unit to your vehicles 12v
output or commonly known as the cigarette lighter port, the F360 should turn
on automatically and prompt the Falcon Zero logo screen.
Once the F360 has recognized the formatted Class 10 SD card, and the unit is
plugged in, all the default settings are already optimized for you, meaning
the best settings; highest resolution, both cameras are on, screen turns off
after one minute, etc. is already programmed in, except for the time and date.
To set the time and date, make sure the F360 is not in recording made, if the red recording icon is flash- ing, simply press the Menu/Rec button to stop recording. Now long press the Menu/Rec button once, this will get you into the Menu Screen, once ( here, long press again to enter the Settings screen. Your first option will be Time/Date, short press the Menu/Rec button to enter, using the Up and Down buttons to select the correct digit and long press the Menu/Rec button to go between hour, minute, date and so on.
Installation
In the box you will find cord clips and adhesive, you may use these or tuck the power cord around your interior cabins panels.
Advanced Setup/Feature/Shortcuts
In Advanced Setup and Features we will layout how to change the default
settings and also how to use the built in LCD screen to play back videos and
photos. You might find that all the default settings are the best for you, if
so, skip ahead on to the LCD functions.
Now you will want to enter the set up of the F360 and change the settings and
customize to your preferences. This is done by long pressing the Menu/Rec
button; you will enter the Menu screen and options, use the Up and Down keys
to scroll through and Short press the Menu button to change the option. In
this screen you will find resolution, white balance, loop recording, audio
recording, and video mode.
Here are the options with Recommended Settings in BOLD:
Resolution – Dual Lens 1920×720/12z80x400 Single-lens
1440×1080/1280×720/720×480 White balance – Auto / Daylight / Cloudy / Tungsten
/ Fluorescent Loop Recording – None / 2 minutes / 5 minutes / 10 minutes
Audio Recording — On/Offz Video Mode – Camera A+B (dual cams) or Cam A or B
Loop recording: will record in 10 minute clips, the F360 will discard the
oldest loop / clip as the SD card fills up.
You will also see the Settings Tab (wrench icon), to get to this tab, long
press the Menu/Rec button again while in the Menu screen. Here is where you
will set up the date, time, auto power off, beep sound confirmation, language,
frequency, an option to format your SD card, change back to default settings,
and lights up (night vision), date stamp, screen saver, and version number.
Here are options with Recommend Settings in Bold: Date/Time: Here you will
long press the Menu button to scroll through and use the Up and down buttons
to select the correct digit. Auto Power Off: Off /2 Min /5 Min / 10 Min (this
option is for when you turn your vehicle off, how long you want the F360 to
remain recording for) Screen Saver: Off /1 Min/ 2 Min / 3 Min (this option is
for how long you want the LCD screen to stay on for, we recommend choosing 1 —
3 minutes)
In standby mode press the MODE button to enter the camera made, press the
MENU/REC button to take pictures; in camera mode, long press the MENU/REC
button to enter into the camera setup menu.
Taking a Picture
The great thing about the built in 3.5” LCD screen is the ability not only to see where your cameras are pointing, but also to able to playback videos and photos. Below we will show you how to view these on the LCD screen.
Photo browsing & deleting
In standby mode, short press the MODE button, the F360 will show up to 9
multiple images (if no phato, “no images” will appear); if there are more than
9 images, you can scroll to the next page to see the next 9. Press the Up or
Down key to select and preview photos, press the MENU/REC button to enter
full-screen browsing, press the Up or Down key to exit full-screen browsing.
If you want to delete a file, long press the MENU/REC button to enter the
playback menu, select “Delete”, press the MENU/REC key to select “Delete” or
“Delete All”, press the MENU/REC button to confirm. If you want to format the
disk, select “Format” and follow the prompts; in the delete mode, long press
the MENU/REC button to exit the Delete menu to return to phato playback mode.
In the Photo browsing mode, by short pressing the MODE button, the F360 will
enter into the video browsing mode (if there is no video file, it will display
“no video”; when there are more than nine video files, each screen contains 9
video files), press the up/down key to select the preview video files, short
press the MENU/REC key to enter full-screen playback interface, press the
MENU/REC key to playback and pause playback, press the up/down button to fast
forward or fast reverse; when paused, press the up/down button to select the
previous or next video file; if you want to delete a file, long press the
MENU/REC key to enter the Playback menu, select “Delete”, press the MENU/REC
key to select “Delete current” or “Delete All’, short press the MENU/REC
button to confirm.
Video browsing & delefing
Connected fo the computer
- When using the included USB cable, connect to your computer, on the F380, the screen will state two options, “mass storage” and “PC camera”, select “mass storage” to view the files on your PC and be able to move them to your PC’s hard drive.
- Select “PC Camera”, the F360 can be used as a web cam as well.
- Unplugging the USB cable will turn off the camera.
At Falcon Zero© we truly hope you enjoy your purchase and please remember not
to change settings on the F360 while driving as this is nat only dangerous £0
you but dangerous to other drivers on the road. We are always here to answer
any questions or problems, if needed, please contact us at .
Thank you!
Warranty
1 Year Manufacturer Limited Warranty
Falcon Zero© warrants to you, the original retail purchaser (‘Consumer”), that
this product (“Product”) will under normal use operate substantially in
accordance with the accompanying documentation for a period of one (1) year
from date of original purchase. Consumer’s sole and exclusive remedy, and
Falcon Zero’s sole and exclu- sive responsibility under this warranty will be,
at Falcon Zero’s option, either to repair or replace the defective Product
during the ane (1) year limited warranty
period so that it performs substantially in accordance with the accompanying
documentation on the date of your initial purchase. Any replacement may be, at
the option of Falcon Zero, a new or remanufactured Product. If Falcon Zero, in
its sole discretion, determines it is not reasonable to replace the defective
Prod- uct, Falcon Zeromay refund to Consumer the purchase price paid for the
Prod- uct.
follow us on and
www.falconzero.coni
email: info@falconzero.com
Phone:844-921-4448
Falcon Zero 2015. This product and packaging are registered trademarks of
Falcon Zero USA.