CURT 12203 Class II Trailer Hitch Instruction Manual

: June 13, 2024
: Curt

Table of Contents

CURT 12203 Class II Trailer Hitch
Product Information
Product Usage Instructions
INSTALLATION
Parts List
**** Tools Required
SAFETY INSTRUCTIONS
Product Registration and Warranty
ASSEMBLY
Instructions
TOWING BASICS & SAFETY INFORMATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CURT 12203 Class II Trailer Hitch

Product Information

This product is a trailer hitch designed for towing purposes. It has a weight carrying capacity of 3,500 lbs for gross trailer weight (GTW) and a tongue weight (TW) capacity of 350 lbs.

Parts List

4 Hex bolt, M12
4 Conical-toothed washer, 1/2

Tools Required

Flathead screwdriver
Ratchet
Torque wrench
Cut-off wheel
Phillips screwdriver
Tape
Socket, 19mm

For a tools reference guide, visit curtmfg.com/trailer-hitch- installation.

Safety Instructions
Safety glasses should be worn at all times while installing this product.

Product Registration and Warranty
CURT stands behind our products with industry-leading warranties. To get copies of the product warranties, register your purchase or provide feedback, visit: warranty.curtgroup.com/surveys.

Product Usage Instructions

Installation Steps:

Remove the two push fasteners from the center of the bumper fascia. Remove the hitch panel from the center of the bumper by removing two screws and returning them to the vehicle owner.
Use tape to mark the bumper support in line with the slot for the hitch panel and trim the center of the bumper support.
Use a flathead screwdriver to remove the tape from the outside of the frame rails covering the weld nuts in the frame.
Raise the hitch into position and secure it with M12 hex bolts (#1) and serrated conical-toothed washers (#2).
Torque all M12 hardware to 86 ft-lbs.

For a visual representation of the final installed image, refer to the product documentation.

Towing Basics & Safety Information:
For information on safely towing your trailer, visit curtmfg.com /understanding-towing.

INSTALLATION

Level of Difficulty
Easy
Installation difficulty levels are based on time and effort involved and may vary depending on the installer level of expertise, condition of the vehicle and proper tools and equipment.

Weight Carrying Capacity

Gross trailer weight (GTW) 3,500 lbs.
Tongue weight (TW) 350 lbs.

Parts List

Item	Qty	Description
1	4	Hex bolt, M12
2	4	Conical-toothed washer, 1/2”

**** Tools Required

Flathead screwdriver Ratchet

Torque wrench	Cut-off wheel
Phillips screwdriver	Tape
Socket, 19mm	—

For a tools reference guide visit

curtmfg.com/trailer-hitch-installation

WARNING
Never exceed the vehicle manufacturer’s recommended towing capacity.

NOTICE

Visit www.curtmfg.com for a full-color copy of this instruction manual, as well as helpful videos, guides and much more!
Before you begin installation, read all instructions thoroughly.
Proper tools will improve the quality of installation and reduce the time required.
This installation requires:
- Underbody support trimming
- Hitch panel removal
Periodic inspection of the trailer hitch should be performed to ensure all mounting hardware remains tight and structural components are secure.
To help prevent damage to the product or vehicle, refer to the specified torque specifications when securing hardware during the installation process.

SAFETY INSTRUCTIONS

Safety glasses should be worn at all times while installing this product.

Product Registration and Warranty

CURT stands behind our products with industry-leading warranties. To get copies of the product warranties, register your purchase or provide feedback, visit: warranty.curtgroup.com/surveys

ASSEMBLY

Parts List

Item| Qty| Description
1| 4| Hex bolt, M12
2| 4| Conical-toothed washer, 1/2”

Instructions

Step 1

Remove the two push fasteners from the center of the bumper fascia.
Remove the hitch panel from the center of the bumper by removing two screws and returning them to the vehicle owner.

Step 2

Use a flathead screwdriver to remove the tape from the outside of the frame rails covering the weld nuts in the frame

Step 3

Use a flathead screwdriver to remove the tape from the outside of the frame rails covering the weld nuts in the frame

Step 4

Raise the hitch into position and secure it with M12 hex bolts (#1) and serrated conical toothed washers (#2).

Step 5

Torque all M12 hardware to 86 ft-lbs.

Final Installed Image

TOWING BASICS & SAFETY INFORMATION

For information on safely towing your trailer, visit curtmfg.com /understanding-towing.
CURTMFG.COM • PRODUCT SUPPORT: 877.287.8634 • 13510-INS- RA • 06/27/2022 • ECN9805