globe B1B6pWiyEjL Wi-Fi Battery Powered Smart Video Doorbell Instruction Manual

globe B1B6pWiyEjL Wi-Fi Battery Powered Smart Video Doorbell

FEATURES

With the Globe smart doorbell you can get live view HD video on your smartphone hear or speak to visitors at your front door through the Globe Suite™ app. Motion detection and video recording capability to capture up to 24 days with 128GB SD card.

LED

Indicator

light

| Red Light (Solid): Doorbell’s network is unstable

Red Light (Flashing rapidly): Doorbell is in pairing mode Blue Light (Solid): Doorbell is connected

Blue Light (Flashing rapidly): Doorbell is connecting to network

---|---
SD Card| Supports micro SD Card storage (Max.128GB)
Microphone| Audio in
Speaker| Audio out
Reset| Press and hold the reset button down for 5 seconds with the pin provided. Once you hear an audible click sound , it means you doorbell has been set to factory settings, and is now ready to be paired

SPECIFICATIONS

Audio: 2-way audio
Operating Temperature : -20 ° C~50 ° C| Power consumption: 1 OVA including

mechanic chime

Wi-Fi standard : IEEE802.11 b/g/n
Frequency: 2.4 Ghz~2.483S GHz| Wireless rang e: 50m (164.04ft )
Wi-Fi security: WPA-PSK/WPA2-PSK| Fi e ld o f v i ew : 130 °

TOOLS REQUIRED

Philips head screw driver or Power Drill with Philips head

3/32″ bit for pilot hole (5/8″) drill bit for cable hole (7 /32″) drill bit for indoor wall anchors WHAT’S IN THE BOX

WHAT’S IN THE BOX

Smart video doorbell

Door Chime kit (Receiver)

Mounting accessories (included)

Wire extender

PRODUCT INFORMATION

CONNECTING INSTRUCTIONS

GET STARTED

• Download the Globe Suite™ app from the App Store or Google Play to your mobile device.

• Launch the Globe Suite™ app.

• To register, enter your mobile phone number or email address.
  Create a password, then login to the app.
  OR

• Login if you already have an account.
  

VERIFY YOUR NETWORK

• Verify your network and ensure your mobile device is connected to a 2.4 GHz Wi-Fi channel”.
• Consult your router documentation for detailed instructions on how to change wireless settings.
• Once your devices have been successfully paired, you can switch back to mixed mode or use a cellular data network to control your smart products.

POWER ON THE DOORBELL VIA use LOCATED AT THE BOTTOM

• You will hear an audible click and the Red LED will be flashing rapidly.
• If the doorbell is not flashing rapidly.
• Press and hold the reset button down for 5 seconds with the pin provided. Once you hear an audible click sound, it means you doorbell has been set to factory settings and is now ready to be paired.
  

ADDA DEVICE

• Select the”+” symbol on the top right-hand corner.

• Select smart doorbell and follow the instructions within the app.

• If the connection fails, try using QR code
  ADD A DEVICE: QR CODE

• On the “add a device page” select the smart doorbell right-hand corner and follow the instructions within the app.

• Select QR code on the top right-hand corner and follow the instructions within the app.

• You’re good to go!
  

ENSURE CONNECTIVITY

• Before mounting the doorbell ensure the doorbell can connect to the Wi-Fi.
  Check to ensure its streaming video on the Globe Suite™ app.

• If you do not see a video stream, please check your Wi-Fi connection.

• DID YOU KNOW?
Most modern routers are dual band meaning they support both 2.4 GHz and 5 GHz channels.
The most common wireless options are:

• Mixed: The router will broadcast both 2.4 GHz and 5 GHz
  simultaneously under the same SSID. The device will choose which to connect to based on multiple variables (congestion, distance to router etc.).

• 2.4 GHz: Broadcast only on this channel.

• 5 GHz: Broadcast only on this channel.

• Dual 2.4 and 5 GHz using separate SSIDs: Router will broadcast both channels and user manually decides which to connect to.

MOUNTING INSTRUCTIONS – MECHANICAL CHIME INSTALLATION

1. First turn off the power breaker at your fuse box for your existing doorbell and mechanical chime. Ring your doorbell to confirm it is now off.

2. Locate your mechanical chime, it is a rectangular box that produces sound when your doorbell is pressed. I may or may not be mounted immediately inside your front door. Once located, remove the cover so the chime’s wiring is exposed.

3. Unscrew both the Trans and Front screw terminals.

• Note that your chime labels are usually on or next to the wire connectors, but they can also be on the inside of the chime cover. 4. Take the included chime kit and attach the prong to the Transformer terminal {Trans). Connect the other prong to the Front terminal {Front). Either prong on the chime kit can be connected to either of the terminals on the chime. Screw both terminals ensuring the wires and prongs are secure.

  5. Using the included double-sided tape, find a space to place your  chime kit to your chime and replace the cover. If there is not enough room to mount inside, place the chime kit on the outside of the chime’s cover.

*Be careful not to interfere with any of the chime’s moving parts. The chime will not work or sound at all if there is interference.

MOUNTING INSTRUCTIONS – WIRED INSTALLATION

BEFORE MOUNTING YOUR DOORBELL, ENSURE POWER GOING TO THE DOORBELL IS OFF

• Remove your existing doorbell.
  The wiring must be exposed.

• Use a pencil to mark where you will be drilling. The wires must come through the top half of the wall plate’s hole. If they don’t it will prevent the wall plate from mounting to the doorbell securely

• If you want to change the angle of the Globe doorbell use the included wedge.
  This can be useful if your doorbell is in a corner or close to a wall that blocks the camera’s view. You can flip the wedge for a reverse angle.
  

• Use a 3/32″ drill bit to drill pilot holes in the desired location.

• Ensure there are no pipes or wires in the mounting location
  • Insert the nail expansion screws if screwing into stone or other hard materials.

  • Align the bracket and secure with mounting screws.
  • Wire the doorbell and place in the bracket.
    *Note: the wire location does not matter.
    

Note: If the wires coming out from your home are too short you can use the included wire crimp extenders.
Take existing doorbell wire from your home, plug into included crimp connector, then plug into wire extender.

• Install the doorbell into the bracket.
• Tighten the screw.
• Turn the power to the chime and doorbell back on.
• Check the video stream in the Globe Suite™ app.
  

CUSTOMER SUPPORT

Since 1932, Globe has taken pride in offering products of the highest quality, and a level of service unparalleled in the industry.
Should you encounter any difficulties, have any questions or simply wish to offer us your valuable feedback, you may contact us in the following ways:
Toll Free Telephone: 1-888-543-1388 {North America Only)/ Toll Free Fax: 1-800-668-4562 {North America Only)
E-Mail: info@globe-electric.com I Mail: Globe Electric Customer Service Department 150 Oneida, Montreal, Quebec, Canada H9R 1A8
Please visit our website to discover other quality Globe products: http://www .globe-electric.com 

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>