CONNECTS 2 CAM-SZ2-RT Reverse Camera Retention Interface User Manual

: June 13, 2024
: CONNECTS 2

Table of Contents

APPLICATION
DISCLAIMER:
CONTENTS
INSTALLATION
CUSTOMER SERVICE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CONNECTS 2 CAM-SZ2-RT Reverse Camera Retention Interface

CONNECTS 2 CAM-SZ2-RT Reverse Camera Retention
Interface

APPLICATION

Isuzu D-Max (RT50) 2012-2015 Isuzu D-Max (RT50 Facelift) 2021 >
Isuzu MU-X 2013-2020 Suzuki Alto 2009 >
Suzuki Baleno 2015 > Suzuki Jimny 2018 >
Suzuki Kizashi 2009-2014 Suzuki Swift 2010-2017
Suzuki SX4 S-Cross 2013 > Suzuki Vitara (MK4/LY) 2015 >

Allows for the retention of the factory OEM reverse camera when upgrading to an aftermarket head unit. This lead is compatible with vehicles which feature OEM touch screen units.

DISCLAIMER:

Prior to Installation
Read the manual prior to installation. Technical knowledge is necessary for installation.
The place of installation must be free of moisture and away from heat sources. Please ensure you use the correct tools to avoid damage to the vehicle or product.
Connects2 can not be held responsible for the installation of this product.

Technical Support
Connects2 want to provide a fast and suitable resolution should you encounter any technical issues. With this in mind, when contacting Connects2, try to provide as much Information as possible. This will speed up the process and help us to help you.
Please use our dedicated online technical support centre: support.connects2.com

INSTALLATION

Remove the vehicles head unit by following the manufacturer’s instructions/ guidelines. Once removed, disconnect all the power connections.
Connect the female 8-way ISO connector from the CAM-SZ2-RT to a separate ISO T-harness or steering wheel control harness (sold separately).
Connect the vehicles green 5-way reverse camera connector to the equivalent found on the CAM-SZ2-RT.
Connect the male Yellow RCA jack to the rear camera input of the aftermarket radio.
Connect the 8-way ISO connector to the head unit. When done, proceed to connect the main power and test the reverse camera’s functionality before reassembling the dashboard.
Note: when testing the head unit, ensure that within the ‘camera settings’ menu, the camera preset is set to on (the location of this setting will differ from head unit manufacturer).