HOMCOM 830-285V02 Quick Setup Christmas Tree Owner’s Manual
- June 13, 2024
- HOMCOM
Table of Contents
HOMCOM 830-285V02 Quick Setup Christmas Tree
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
|
---|---
DEAR CUSTOMER,
Thank you for purchasing this product. So that your appliance serves you well, please read all the instructions in this user’s manual. If you have any questions, please contact our customer care center. Our contact details are below:
Warning
This tree is for INDOOR use ONLY. The tree base MUST be placed on a flat rigid
surface.
- For indoor use only, Do not use outcoors or in moist/humid conditions.
- Do not operate in a confined space or allow contact with flammable material.
- Do not allow this product to come into contact with direct heat or flame.
- Do not operate this product whilst in the packaging.
Shaping Your Tree
Please assemble the tree with glove.
Start at the bottom of the tree and ensure that each branch has fallen fully
into place. Carefully adjust any branches as needed to evenly space them.
With each branch, separate out the individual tips and angle them out and away
from the center of the tree. For most tree styles, the tips furthest back on
the branch(toward the center pole) should be angled vertically up from the
branch and sideways out from the branch so as to resemble a peacock’s fanned
tail when shaped. We recommend shaping the branches vertically
upward as much as possible to give the tree its full appearance. (The tips
toward the end of the branch should be angled out and away from the branch and
away from the center pole and toward you.)
Work your way around each branch level and then upward on the tree, adjusting
each layer before moving upward.
Once you have reached the top of the tree, step back, and look at the tree
from a distance.
This allows you to look for any areas that need a bit more fluffing to fill in
any gaps.
Storage
Remove all holiday decorations. Gently press tips back into center branch.
Raise all branches to original upright position taking care not to place undue
pressure on the attached ends of the branches. When disassembling tree, a
twisting motion will help to separate the sections from each other. All tree
parts can be put back into the carton and should be stored in a cool, dry
place.
PART LIST
ASSEMBLY INSTRUCTIONS
NOTE: Please remove the circular protector caps on the end of each pole
before assembling.
If the caps were broken, It will not affect the use of.
Shaping the Tree Branches
You can shape the tree branches working with each row individually, and
working your way from the inner tips outward on each branch. Shape the tips to
fill gaps between branches to make the tree full and natural looking.
The branches need to be expanded manually and take some time to get the final
effect of the picture
CUSTOMER SUPPORT
Country
| Phone|
---|---|---
us
|
001-877-644-9366
|
UK
|
0044-800-240-4004
|