CURT 19295 CrossWing 5th Wheel Kingpin Head Attachment Installation Guide
- June 13, 2024
- Curt
Table of Contents
INSTALLATION MANUAL
19295
19295 CrossWing 5th Wheel Kingpin Head Attachment
Level of Difficulty
Moderate
Weight Capacity
| Gross trailer weight (GTW) | 20,000 lbs. |
|---|---|
| Vertical load | 5,000 lbs. |
Parts List
| Item | Qty | Description |
|---|---|---|
| 1 | 1 | Upper weldment |
| 2 | 2 | Hex head cap screw, 1/2″ |
| 2 | 2 | Nylock nut, 1/2″ |
Tools Required
| Ratchet | Torque wrench |
|---|---|
| Socket set | — |
Torque Specifications
| 1/2″ bolt | 65 ft-lbs. |
|---|
Use above torque setting unless otherwise noted
Product Registration
CURT stands behind our products with industry-leading warranties. Provide
feedback and help us to improve our products by registering your purchase at:
warranty.curtgroup.com/surveys
NOTICE
Before you begin installation, read all instructions thoroughly.
Proper tools will improve the quality of installation and reduce the time
required.
To help prevent damage to the product or vehicle, refer to the specified
torque specifications when securing hardware during the installation process.
DANGER ZONE PRECAUTIONS
Block all trailer tires in front and behind with appropriate wheel chocks. Do
not substitute objects such as, but not limited to: stones, wood blocks, etc.
Front trailer lifting jacks must be supporting the trailer and resting on a
firm and level surface.
Towing vehicle must be stationary with automatic transmission in park (manual
in neutral), emergency brake applied and engine off.
WARNING
Fully instruct and demonstrate the operation of this 5th wheel hitch to the
end user. Include the importance of observing all warnings contained herein,
including warning labels on 5th wheel hitch main body. Provide this manual in
its entirety to the end user. Serious injury or death may result if the
warnings above are not observed.
Do not expose hands, body parts or clothing between the truck and trailer or
the truck’s bed sides and trailer. If you must place any part of your body
under trailer or between truck and trailer, you must:
- Block all trailer tires with wheel chocks.
- Make sure trailer landing gear / jacks are resting on a firm, level surface.
- Towing vehicle must be stationary with auto transmission in park (manual in neutral), emergency brake applied and engine off.
Never exceed the towing capacity (trailer and contents combined) of any towing
system component or your vehicle.
Improperly coupled trailers can separate or drop without notice, causing
serious injury or death. To reduce the chance of serious injury or death:
Never attempt to couple trailer without reading and following all instructions
thoroughly.
Always follow operating instructions to secure trailer to tow vehicle.
Make sure the hitch is secure before towing.
Prior to towing, ensure all components and hardware are structurally sound and
secure.
Always chock the trailer to prevent movement while coupling the hitch.
Always ensure lynch pins are installed through handle before towing.
Always perform a pull test prior to towing. See ‘pull test’ later in this
instruction manual.
Never position anyone under the trailer’s kingpin area during coupling and
uncoupling.
Product Photo
ASSEMBLY
Parts List
| Item | Qty | Description |
|---|---|---|
| 1 | 1 | Upper weldment |
| 2 | 2 | Hex head cap screw, 1/2″ |
| 2 | 2 | Nylock nut, 1/2″ |
UPPER COUPLER INSTALLATION
Step 1
Place upper weldment (#1) and lube plate (#4 – sold separately) as shown on
trailer king pin. While holding the upper weldment tight against the pin box,
insert two 1/2″ hex bolts (#2) through the upper weldment and secure with 1/2″
nylock nuts (#3).
Step 2
Torque the 1/2″ hex bolts and nuts to 65 ft-lbs.
Step 3
Make sure the the upper weldment (#1) spins freely around the king pin.
Maintenance
The CURT 5th wheel hitch has been designed to offer years of safe and reliable
service. To achieve the best performance and the longest possible service
life, please follow the maintenance schedule listed in the installation manual
included with your hitch or visit https://www.curtmfg.com for online
installation manuals
CURTMFG.COM
PRODUCT SUPPORT: 877.287.8634
19295-INS-RA
10/31/2022
ECN10212
Documents / Resources
| CURT
19295 CrossWing 5th Wheel Kingpin Head
Attachment
[pdf] Installation Guide
19295, 19295 CrossWing 5th Wheel Kingpin Head Attachment, CrossWing 5th Wheel
Kingpin Head Attachment, 5th Wheel Kingpin Head Attachment, Wheel Kingpin Head
Attachment, Kingpin Head Attachment, Head Attachment, Attachment
---|---
References
- CURT: Trailer Hitches - Trailer Wiring - 5th Wheel - Gooseneck
- CURT: Trailer Hitches - Trailer Wiring - 5th Wheel - Gooseneck
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>