Acoustic Research ARTWS35 QSG 02 All-in-1 Duo Wireless Speaker User Guide

Acoustic Research ARTWS35 QSG 02 All-in-1 Duo Wireless Speaker

Product Information

The product consists of a speaker and earbuds that provide wireless audio playback. The speaker and earbuds need to be charged before initial use. The speaker has a charging jack on the side,and the earbuds have charging compartments inside the back door ofthe speaker. The charging process is indicated by flashing and solid indicator lights.

Product Usage Instructions

1. Charging the Speaker and Earbuds:

   • Open the back door of the speaker and place the earbuds inside their charging compartments.
   • Close the door.
   • Insert the provided charging cable into the charging jack on the side of the speaker.
   • Plug the other end of the charging cable into a USB power source (e.g., a computer or USB charger).
   • The indicator light next to the ON/OFF switch flashes red while the speaker is charging and turns solid red when fully charged.
   • The indicator lights inside the speaker’s charging compartments flash green while the speaker is charging and turn solid green when fully charged.
   • Each earbud’s indicator light turns solid red when charging and turns off when fully charged.

2. Pairing the Earbuds with Your Phone:

   • Open the speaker door and take both earbuds out simultaneously (important for proper pairing).
   • The earbuds automatically turn on, indicated by flashing red and blue lights and an announcement of “Power on”.
   • If the earbuds do not automatically turn on, press and hold the back of each earbud to turn them on manually.
   • Enable Bluetooth on your smartphone or other device.
   • Choose “AR Earbuds” from the pairing options on your smartphone (if not listed, choose “Scan” from the Bluetooth menu).
   • The earbuds announce “Device connected” when the pairing process is complete.

3. Pairing the Speaker with Your Phone:

   • Put the ON/OFF switch on the side of the speaker in the position.
   • If no device is paired yet, the indicator light next to the ON/OFF switch starts flashing blue, indicating readiness for pairing.
   • Enable Bluetooth on your smartphone or other device.
   • Choose “AR Speaker” from the pairing options on your smartphone(if not listed, choose “Scan” from the Bluetooth menu).
   • The indicator light next to the ON/OFF switch turns solid blue when the speaker is connected to your phone.
   • Note: The indicator flashes blue when playing music through the speaker.

4. Using the Earbuds and Speaker:

   • The earbuds and speaker connect separately to your phone or other Bluetooth device.
   • To listen with the speaker, choose “AR Speaker”.
   • To listen with the earbuds, choose “AR Earbuds”.
   • Note: Playback control and phone answer/end control may not be supported by all phones. Refer to your phone’s user manual for more information.

5. Resetting the Earbuds:

   • Ensure the earbuds are not connected to your phone or other Bluetooth device (temporarily turn off your phone’s Bluetooth if necessary).
   • Press the back of either earbud five times to reset them.
   • The earbuds beeped four times to indicate a successful reset.
   • Follow the instructions in step 2 to pair the earbuds with your phone again.

6. Charging and Storing the Earbuds:  

   • [Additional information on charging and storing the earbuds is not provided in the given text extract. Please refer to the complete user manual for detailed instructions.]

Charge the speaker and earbuds

IMPORTANT: The speaker and earbuds must be charged before you use them for the first time.
Open the door on the back of the speaker and place the earbuds inside their charging compartments as shown below. Then close the door.

Insert the provided charging cable into the charging jack on the side of the speaker. Plug the other end of the charging cable into a USB power source (like a computer or a USB charger).

The indicator light next to the ON/OFF switch flashes red while the speaker is charging and turns solid red when the speaker is fully charged.
Note: There are indicator lights inside the speaker’s charging compartment also. They flash green while the speaker is charging and turn solid green when the speaker is fully charged.

Each earbud’s indicator light turns solid red when the earbud are charging. The light turns off when each earbud is charged.

Pair the earbuds with your phone

IMPORTANT: Open the speaker and take both earbuds out at the same time when pairing. Otherwise, they might not pair with your phone properly.

To turn on the earbuds: Open the speaker door and take the earbuds out. The earbuds automatically turn on. The earbud indicator lights flash red and blue, and the earbuds announce “Power on.”

Note: If the earbuds do not automatically turn on when you take them out of the case, press and hold the back of each earbud as shown here to turn it on manually.

• Enable Bluetooth on your smartphone or other device.
• Choose AR Earbuds from the pairing options on your smartphone. (If it’s not in the list, choose “Scan” from your phone’s Bluetooth menu.)
• The earbuds announce “Device connected” when the process is complete.

Pair the speaker with your phone

To turn on the speaker: Put the ON/OFF switch on the side of the speaker in the ON position. If you haven’t already paired a device with the speaker, the indicator light next to the ON/OFF switch starts flashing blue—this means the speaker is ready to pair.

Enable Bluetooth on your smartphone or other device.
Choose AR Speaker from the pairing options on your smartphone. (If it’s not in the list, choose “Scan” from your phone’s Bluetooth menu.)
The indicator light next to the ON/OFF switch turns solid blue when the speaker is connected to your phone.

Note: This indicator flashes blue when you play music through the speaker.

Using the earbuds and speaker

IMPORTANT: The earbuds and speaker connect separately to your phone or other Bluetooth device. To listen to the speaker, choose AR Speaker. To listen to the earbuds, choose AR Earbuds.

Using the earbuds
To turn each earbud on manually: Press and hold the back of each earbud until you hear the “power on” prompt.

To turn both earbuds off manually: Press and hold the back of either earbud until you hear the “power off” prompt.

• To answer or end a phone call: Press the back of either earbud.
• To decline a phone call: Press and hold the back of either earbud for 2 seconds.
• To play/pause music: Press the back of either earbud.
• To go to the next song: Double press the back of the right earbud.
• To go to the previous song: Double press the back of the left earbud.
• To use your phone’s voice assistant: Triple press the back of either earbud.

IMPORTANT: Not all phones support playback control and phone answer/end control. Check your phone’s user manual for more information if you’re having trouble with these functions.

To reset the earbuds to their factory settings:
Make sure the earbuds are not connected to your phone or other Bluetooth device (you might need to turn your phone’s Bluetooth off temporarily). Then press the back of either earbud five times to reset. The earbuds beeped four times. Follow the instructions in step 2 to pair the earbuds with your phone again.

Charging and storing your earbuds
The earbuds beep continuously when they need to be recharged.
To recharge the earbuds: Open the door on the back of the speaker and put the earbuds back in their charging compartments. They turn off automatically when you put them in their charging compartments.

IMPORTANT: If the speaker has run out of charge, the earbuds do not turn off or disconnect automatically. Turn the earbuds off manually (see Using the Earbuds) and recharge the case.

Tour of the earbuds/speaker

• ARTWS35 QSG 02

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>