IeGeek ZS-GX5S Wireless Indoor-Outdoor WiFi Security Camera User Guide

IeGeek ZS-GX5S Wireless Indoor-Outdoor WiFi Security Camera

Scan the QR Code to Get the Multi-language Electronic Manual

What’s in the Box

Camera Overview

1. Antenna
2. Microphone
3. Lens
4. Charging Status Light
5. PIR Motion Sensor
6. Floodlight
7. Working Status Light
8. SD Card Slot
9. Power Button
10. Reset Button
11. USB Charge Port

Press and  ho ld for 5s unti l

Reset Button hearing ‘Boogu· to reset or

restore to fac tory sett ing

SD Card Slot Support loca l SD cord storage

(up to l28G)

Working Status Light

| Solid on red : Network is abnormal
Slow flickering red: Awaiting Wi-Fi connection and start adding devices
Wi-Fi fast flickering red: Wi-Fi con n ect in g
Solid on blue: Wi- Fi co n nected successfu lly, the camera running normally

Setting Up the Floodlight Camera

Download ‘ieGeek Cam’ APP

Method 1: Download ‘ieGeek Cam’ APP from APP Store (iOS) or Google Play (Android);
Method 2: Scan ‘ieGeek Cam’ APP QR code to download it.

Register Account

New users need to register by email. The concrete steps are as following:

1. Click “Register”;
2. Follow the steps to complete the registration of the account;
3. Log in.

Note:

• When registering a new account, please choose the region which you are actually in and correct country code. (Different registered regions can’t share the camera.)
• Please choose to register by e-mail.

How to Add a Camera to APP

Before Using:

1. Please insert the Miera SD card before power on, otherwise, the SD card cannot be detected.
2. Put the camera and smart phone 1-3 ft (30-100 cm) away from the router to set Wi-Fi.
3. Make sure that the camera is using 2.4GHz Wi­Fi.

Wi-Fi connection Steps

Tap’+’ to Add Device

Select Battery Camera

Power on Camera

Reset Device

Input Wi-Fi Password

scan QR Code

Wait for Connection

Device Added

( Note: If it can’t be powered on, please plug in DC 5V 2A power adapter to charge the camera for 15minfirst)

Charge the Battery

Charge the battery with a power adapter. (not included)
Charging Indicator:   Red LED: Charging

Charge the battery with the ieGeek Solar Panel
BLUE LED: Fully charged

Pay attention to:

For better weatherproof performance, always keep the USB charging port covered with the rubber plug after charging the battery.
When connecting to the solar panel, you don”t need to open the rubber cover completely, just open the smaller USB part of the rubber cover to connect.

Mounting the Floodlight Camera

Find a Good Mounting Spot

To find a spot to mount this floodlight camera, you need to test signal strength.

1. Open the ieGeek cam app, go to Installation Guide>Network Diagnostic.
2. To test the wireless signal strength, take your camera and phone to the location where you want to mount the camera.
3. Move the camera as close to the router as possible if the wireless signal strength is poor.

Select Height and Location

Hang ieGeek Camera 7-10 ft (2-3 m) above the ground. This height maximizes the detection range of the motion sensor of ieGeek Camera.
Avoid placing ieGeek Camera under direct sunlight.

Note: If a moving object approaches the PIR sensor vertically, the camera may fail to detect motion.

• Do not face the camera towards any objects with bright lights, including sunshine, bright lamp lights, etc.
• Do not place the camera near any outlets, including the air condition events, humidifier outlets, the heat transfer vents of projectors, etc. Do not install the camera at places with strong wind.
• Do not face the camera towards a mirror.
• Keep the camera at least l meter away from any wireless devices, including Wi-Fi routers and phones in order to avoid wireless interference.

Notes on PIR Motion Sensor

PIR sensor Detection Range

The PIR detection range can be customized to meet your specific needs. You may refer to the following table to set it up in Device Settings via ‘ieGeek Cam’ App.

Note: The detection range would be wider with higher sensitivity but it would lead to more false alarms. It is recommended to set up the sensitivity level to “Low” or “Mid” when you install the camera outdoors.

FAQs

For more detailed FAQs, please log in to the APP, search in “Me”-“FAQ”-“Help & Feedback”-“Battery Camera·

The device prompts offline?

1. Check whether the equipment is in the power­ on state, and observe whether the working light of the equipment is on normally.
2. Check whether the Wi-Fi network is in good condition and restart the router.
3. If the device is located far away from the router, which results in the inability to obtain a good Wi-Fi signal, it is recommended to move the router to a closer place or add a Wi-Fi amplifier to improve the Wi-Fi performance of the home.
4. Delete the camera from your ieGeek Cam account and add it again after resetting the device.

Check whether the device firmware and application program are the latest version.

Update router or Wi-Fi password?
Delete the camera from your ieGeek Cam account. After resetting the device, use the new Wi-Fi and password to add it again.

Can’t play historical video?

1. Check the status of the SD card in “Settings” to ensure that the SD card has been successfully recognized.
2. Reinsert the SD card.
3. In the application, format the SD card.
4. Try another new SD card.

Alarm push frequently?

1. In the app, lower the sensitivity of the motion detection alarm.
2. Check whether there are objects that interfere with and trigger the PIR sensor in the field of view of the device, such as the outdoor unit of the air conditioner, driving cars, passing pedestrians, etc. The angle of the device can be adjusted appropriately to avoid these easily disturbing objects
3. Turn on “detection” and use humanoid algorithm to filter useless alarms.

The phone cannot receive the alarm push?

1. Turn on all the push permissions of the “ieGeek Cam” application in the system settings of your mobile phone.
2. Make sure that the device’s motion detection function is successfully turned on.
3. Restart the phone, and clear the cache on Android phones.
4. Check whether the network is good.

Safety Statement

FCC Statement

This device complies with Port 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warnings: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/TV technician for help.

FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed/mobile exposure condition. The min separation distance is 20cm.
( FCC ID: 2AZL7-ZS-GX1S)
Notice: Shielded cables
All connections to other computer devices must be made using shielded cables to maintain compliance with FCC regulations.
The following EU Importer is the responsible party Company Name: Prolinx GmbH
Address: Brehmstr 56. 40239. D0sseldorf
Telephone: +0049 211 3105 4698
The following UK Importer is the responsible party Company Name: Prolinx Global LTD
Address: 27 Old Gloucester Street, London, WClN 3AX ,UK
Telephone: +0044 20 39661193
( This product complies with the radio interference requirements of the European Community.
(‘ .,with This high product quality is designed materials and and manufactured components , which can be recycled and reused.
‘a This symbol means the product must not be A discarded as household waste, and should be delivered to an appropriate collection facility far recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service.

www.iegeek.com

ieGeek and ieGeek logo are trade ma rim of Shenzhen Globalebuyco. Ltd, registered in theUnitedstotes□ndothercountries.Alright reserved

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>