AIPHONE MY-DGA Wired 12-24Vac Digital Keypad Instruction Manual

AIPHONE MY-DGA Wired 12-24Vac Digital Keypad

SYSTEM OUTLINE & COMPONENTS

MY-DC/A and MY-DG/A are semi-flush PanTilt doorstations for use with MY Series Video Entry Security system.

Single PanTilt entry

• PS-18Y: PS-18YC/A or PS-18YD/A
• PS-18Y: PS-18C or PS-18D
• PS12S-12C or PS-12A

Multiple PanTilt entries

FEATURES

• Audio, video, and Pan Tilt control on 2 wires
• Pan and tilting of door camera
• 1 00m, 330′ from camera to monitor on 1.0mm dia., 18AWG wire
• Extended distance to 300 m, 980′ with MYW-BA adaptor (using 1.2mm dia., 16AWG PE jacketed wire)
• Can replace an existing doorbell using the same wire (remove existing transformer)

PACKAGE CONTENTS

• PanTilt video door station (MY-DC/A or MY-DG/A)
• Panel lock remover
• Packet of screws
• Installation & Operation Manual
• Refer to the Installation & Operation manual packed with main monitor or adaptor.

NAMES AND FUNCTIONS

The MY-DC/A and MY-DG/A, when measured at 50 cm, 20″ in front of the camera, views an area of 49 cm, 19″ vertically by 66 cm, 26″ horizontally. On any and every inside monitor, operate Pan/tilt control pad to maximize viewing area, and Backlight button to view dimly lit or strongly backlit areas.

MY-DC/A, MY-DG/A
image viewing area (approximate)

• when camera is panned and tilted fully
• when camera is in still position.

PRECAUTIONS ON INSTALLATION & WIRING

• When existing chime wires are used, it is possible that the wires may contain AC voltage current. Locate and remove the bell transformer before actually connecting MY-DC/A or MY-DG/A.
• Extra pair(s) in the installed cable can affect image quality, and must be terminated with a 120 ohm resistor at each end of wires at both MY-DC/A or MY-DG/A and inside monitor(s).

Installation

MY-DC/A and MY-DG/A employ a CCD camera, and its performance can be affected by bright direct light, such as strong sunlight, gate light or street or porch light which is directed into the camera lens. Use backlight button to compensate for silhouetted images.

WIRING

MOUNTING

Semi-flush mounting

• Unlock front cover at bottom, using the tool supplied.
• Attach the mounting bracket to 3-gang box.

Surface-mounting (MY-DC/A only)

• Mount the MYW-R box on wall or single-gang box.
• Attach MY-DC/A with 2 mounted screws. Mounting bracket is not used.
  MYW-R: 188 H x 118 WX36 D (mm).
  Weight 1 00g (0.22 lbs.) approx. 7-3/8″H X 4-5/8″W X 1-3/8″0.

Surface-mounting (MY-DC/A only)

• Mount the MYW-R box on wall or single-gang box.

• Attach MY-DC/A with 2 mounted screws. Mounting bracket is not used.
  MYW-R: 188 H x 118 WX36 D (mm).
  Weight 1 00g (0.22 lbs.) approx. 7-3/8″H X 4-5/8″W X 1-3/8″0.

• Mount MY-DC/A or MY-DG/A unit on the bracket, fastening 2 screws.

• Replace front cover and click the tip to lock.

OPERATIONS

The red LED is lit to locate call button, day or night. A single push of Call button activates inside video monitor, as well as a 4 or 2-tone chime (or other). When inside station replies, talk handsfree.

Poor lighting conditions:
The MY-DC/A and MY-DG/A’s infrared illumination will light the image of the caller when positioned within 50cm, 20″ in front of the camera, and will see in near darkness (1 Lux of light).

TECHNICAL PRECAUTIONS

MY-DC/A and MY-DG/A do not have a camera angle presetting feature.

Installation location:
The MY-DC/A and MY-DG/A are weather resistant, but for best results it should be protected from direct weather conditions. An eave or overhead cover is recommended to protect it from direct rainfall.

Temperature:
The MY-DC/A or MY-DG/A is rated to operate at
temperatures between -10° and 60°C (14° and 140°F). When the outside temperature lowers rapidly, the camera lens may fog up slightly, causing a blurry picture at the inside monitor. The ventilation openings will allow· the moisture to evaporate, and the picture will return to normal.

Cleaning:
Clean the unit with a soft cloth and neutral household cleanser. Do not use an abrasive cleaner or cloth.

SPECIFICATIONS

• Power source

• Camera unit

• Scanning lines

• Image viewing area

• Camera is powered from monitor unit

• CCD camera 525 lines at 50 cm, 20″ in front of camera
  Vertical 90cm, 3′. Horizontal 180cm, 6′
  when panned and tilted fully

• Minimum illumination1 Lux at 50cm, 20″ from camera

Dimensions & weight

*Both 33mm, 1-1 /4″ recessed

Temperature:
The MY-DC/A or MY-DG/A is rated to operate at temperatures between -10° and 60°C (14° and 140°F).
When the outside temperature lowers rapidly, the camera lens may fog up slightly, causing a blurry picture at the inside monitor. The ventilation openings will allow· the moisture to evaporate, and the picture will return to normal.

Cleaning:
Clean the unit with a soft cloth and neutral household cleanser. Do not use an abrasive cleaner or cloth.
Pan/tilt viewing area shown by dotted line 29cm (11″)

Viewing area of camera in still position.
0cm 50cm (20″) All figures are approximate.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.

WARRANTY

• Aiphone warrants its products to be free from defects of material and workmanship under normal use and service for a period of two :;:
• years after delivery to the ultimate user and will repair free of charge or replace at no charge, should it become defective upon which +
•  examination shall disclose to be defective and under warranty. Aiphone reserves unto itself the sole right to make the final decision +
• whether there is a defect in materials and/or workmanship; and whether or not the product is within the warranty. :;:
• This warranty shall not apply to any Aiphone product which has been subject to misuse, neglect, accident, or to use in violation of +
• instructions furnished, nor extended to units which have been repaired or altered outside of the factory. This warranty does not cover :;:
• batteries or damage caused by batteries used in connection with the product. +
• This warranty covers bench repairs only, and any repairs must be made at the shop or place designated in writing by Aiphone. :::
• Aiphone will not be responsible for any costs incurred involving on site service calls.

References

• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>