SHURE SE215 Pro Professional Sound Isolating Earphones Owner’s Manual
- June 13, 2024
- Shure
Table of Contents
- SE215 Pro Professional Sound Isolating Earphones
- Important Safety Information
- General Description
- Wearing the Earphones
- Detachable Cable
- Maintenance and Cleaning
- Specifications
- SAFETY PRECAUTIONS
- IMPORTANT SAFETY INSTRUCTIONS
- Certifications
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
SE215 Pro Professional Sound Isolating Earphones
Owner’s Manual
SE215 Pro Professional Sound Isolating Earphones
The Shure SE215 Sound Isolating™ earphones user guide. Includes how to wear,
how to clean, and earphone specifications.
Version: 1.0 (2023-A)
SE215 Sound Isolating Earphones™
Important Safety Information
Before using this product, please read the warnings and safety instructions: SAFETY PRECAUTIONS
General Description
Shure Sound Isolating™ Earphones, deliver a detailed soundstage free from
outside noise. The powerful and stylish Shure SE earphones come with a
detachable cable, adapters, a durable carrying case, and interchangeable Sound
Isolating sleeves for a comfortable and personalized fit.
Inserting the Earphones
Insert the earphones so they form a tight seal. The fit of the earphone can
greatly affect sound quality.Important: If
there seems to be a lack of low frequency response (bass), this means that the
earphone sleeve is not forming a tight seal. Gently push the ear phone deeper
into the ear canal or try a different sleeve.
Warning: Do not push the earphone sleeve beyond the ear canal opening.
Wearing the Earphones
The following are some suggested ways of wearing the earphones. Changing Sleeves
- Twist and pull to remove the sleeve from the nozzle.
- Slide on a new sleeve so that it completely covers the barb and the nozzle.
Caution: If the barb or any of the nozzle is exposed, the sleeve is not properly installed. Replace sleeves if they do not tightly grip the nozzle. To ensure proper fit and performance, use only sleeves supplied by Shure (unless using custom molded sleeves).
Detachable Cable
You may need to detach the cable from the earphones to attach optional components or to replace the cable if it becomes damaged. To prevent accidental separation, the connector has a snug fit. Take special care to prevent damage to the earphone and connector.
- Do not use pliers or other tools.
- Grasp the connector and the earphone as close as possible to where they join.
- Pull straight apart—do not twist. Cable is a snap fit, not threaded. 4/9
Note: If you pull at an angle, the connector will not detach.
- Do not pull on the cable or put any pressure on the earphone nozzle.
- Listen for a click when connecting.
- When reattaching the cable, match the “L” and “R” markings. For clear cables and earphones, match the color dots (Red=Right, Blue=Left).
Removing
the Earphones
Grasp the body of earphone and gently twist to remove.
Maintenance and Cleaning
Careful maintenance ensures a tight seal between the sleeve and nozzle, improving sound quality and product safety.
- Keep the earphones and sleeves as clean and dry as possible.
- To clean sleeves, remove them from earphones, gently rinse in warm water and air dry. Foam sleeves require a longer drying time. Inspect for damage and replace if necessary. Ear sleeves must be completely dry before reusing.
- Wipe the earphones and sleeves with mild antiseptic to avoid infections. Do not use alcohol-based disinfectants.
- Do not expose earphones to extreme temperatures.
- Replace sleeves if they do not fit properly.
- Do not attempt to modify this product. Doing so will void the warranty and could result in personal injury and/or product failure.
Cleaning the Earphone Nozzle
If you notice a change in sound quality, remove the sleeve and check the
nozzle of your earphone. If nozzle is blocked, clear obstruction by using wire
loop end of cleaning tool.
If no obstruction is found or if sound quality does not improve, replace the
sleeve with a new sleeve. ****
Caution: When cleaning, do not force any object through the earphone
nozzle! This will damage the earphone sound filter.
Warning: The cleaning tool is only to be used to clean the earphones. Any
other use, such as using the tool to clean ears or foam sleeve, could result
in injury. The cable connectors to the earphones may collect debris or other
deposits that can affect audio quality. If this happens, disconnect the cables
and clean them using a dry cotton swab.
Specifications
SE215 Earphone
Transducer Type Single High-Definition MicroDriver
Sensitivity
at 1 kHz 107 dB SPL/mW
Impedance
at 1 kHz 17 Ω
Noise Attenuation
up to 37 dB
Frequency Range
SE215 Special Edition | 21 Hz–17.5 kHz |
---|---|
SE215 | 22 Hz–17.5 kHz |
Input Connector
MMCX connectors
Net Weight
20.8 g (.7 oz.)
Operating Temperature
-18°C to 57°C (0°F to 135°F)
Storage Temperature
-29°C to 74°C (-20°F to 165°F)
SAFETY PRECAUTIONS
Before using this product, please read and save the enclosed warnings and
safety instructions.
WARNING FOR ALL EARPHONES!
Use, clean, and maintain earphones according to manufacturer’s instructions.
SAFETY PRECAUTIONS
The possible results of incorrect use are marked by one of the two
symbols—”WARNING” and “CAUTION”—depending on the imminence of the danger and
the severity of the damage.
WARNING: Ignoring these warnings may cause severe injury or death as a
result of incorrect op eration.
CAUTION: Ignoring these cautions may cause moderate injury or property
damage as a result of incorrect operation.
WARNING
-
If water or other foreign objects enter the inside of the device, fire or electric shock may result.
-
Do not attempt to modify this product. Doing so could result in personal injury and/or product failure.
-
Do not use when a failure to hear your surroundings could be dangerous, such as while driving, or when biking, walking,
or jogging where traffic is present and accidents could occur. -
Keep this product and its accessories out of reach of children. Handling or use by children may pose a risk of death or se rious injury. Contains small parts and cords that may pose risk of choking or strangulation.
-
Prior to inserting the earphone, always recheck the sleeve to make sure it is firmly attached to the nozzle to decrease the risk of sleeves detaching from the nozzle and becoming lodged in your ear. If a sleeve becomes lodged in your ear, seek professional medical assistance to remove the sleeve.
-
Stop using the earphones and consult a medical professional if you experience irritation, excessive wax buildup, or other discomfort.
CAUTION
- Never disassemble or modify the device, as failures may result.
- Do not subject to extreme force and do not pull on the cable or failures may result.
- Keep the earphone dry and avoid exposure to extreme temperatures and humidity.
- If you are currently receiving ear treatment, consult your physician before using this device.
High sound pressure
Hearing damage risk
To prevent possible hearing damage, do not listen at high volume levels for
long periods.
IMPORTANT SAFETY INSTRUCTIONS
- READ these instructions.
- KEEP these instructions.
- HEED all warnings.
- FOLLOW all instructions.
- DO NOT use this apparatus near water.
- CLEAN ONLY with dry cloth.
- DO NOT block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- DO NOT install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- DO NOT defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wider blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replace mint of the obsolete outlet.
- PROTECT the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- ONLY USE attachments/accessories specified by the manufacturer.
- USE only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
- UNPLUG this apparatus during lightning storms or when unused for long periods of time.
Certifications
This product meets the Essential Requirements of all relevant European
directives and is eligible for CE marking.
The CE Declaration of Conformity can be obtained from:
www.shure.com/europe/compliance
Authorized European representative:
Shure Europe GmbH
Global Compliance
Jakob-Dieffenbacher-Str. 12
75031 Epping, Germany
Phone: +49-7262-92 49 0
Email: info@shure.de
References
- Shure: Microphones, Wireless microphones, in-ear monitoring, earphones, headphones
- Documentation Finder - Shure Europe
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>