ZEBRA ET8x ET85B-3P5B2-CFC Rugged Tablet User Guide
- June 13, 2024
- ZEBRA
Table of Contents
ET80/ET85
Rugged 2-in-1 Tablet
Quick Start Guide
for Microsoft® Windows® 10
ET8x ET85B-3P5B2-CFC Rugged Tablet
ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies
Corporation, registered in many jurisdictions worldwide. All other trademarks
are the property of their respective owners.
© 2023 Zebra Technologies Corporation and/or its affiliates. All rights
reserved.
Information in this document is subject to change without notice. The software
described in this document is furnished under a license agreement or
nondisclosure agreement. The software may be used or copied only in accordance
with the terms of those agreements.
For further information regarding legal and proprietary statements, please go
to:
SOFTWARE: zebra.com/linkoslegal
COPYRIGHTS: zebra.com/copyright
PATENTS: ip.zebra.com.
WARRANTY: zebra.com/warranty
END USER LICENSE AGREEMENT: zebra.com/eula
For purchasing a new battery for replacement, please go to Request a
Repair.
Terms of Use
Proprietary Statement
This manual contains proprietary information of Zebra Technologies Corporation
and its subsidiaries (“Zebra Technologies”). It is intended solely for the
information and use of parties operating and maintaining the equipment
described herein. Such proprietary information may not be used, reproduced, or
disclosed to any other parties for any other purpose without the express,
written permission of Zebra Technologies.
Product Improvements
Continuous improvement of products is a policy of Zebra Technologies. All
specifications and designs are subject to change without notice.
Liability Disclaimer
Zebra Technologies takes steps to ensure that its published Engineering
specifications and manuals are correct; however, errors do occur. Zebra
Technologies reserves the right to correct any such errors and disclaims
liability resulting therefrom.
Limitation of Liability
In no event shall Zebra Technologies or anyone else involved in the creation,
production, or delivery of the accompanying product (including hardware and
software) be liable for any damages whatsoever (including, without limitation,
consequential damages including loss of business profits, business
interruption, or loss of business information) arising out of the use of, the
results of use of, or inability to use such product, even if Zebra
Technologies has been advised of the possibility of such damages. Some
jurisdictions do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusion may not apply to
you.
Publication Date
January 18, 2023
Features
NOTE: Some features may not be available on all configurations.
1| Light sensor| Determines ambient light for controlling display backlight
intensity.
---|---|---
2| Front microphones| Use for voice communications or audio recordings.
3| Windows Hello Infrared Illuminator| Illuminates your face with infrared
(IR) light during Windows Hello face authentication.
4| Front camera| Use for video conferencing.
5| Camera indicator LED| Illuminates when the camera is activated. Momentarily
lights white when the device boots.
6| Touch screen| Displays all information needed to operate the device.
7| Stylus tether mount| Use to attach a stylus tether mount.
8| Volume up/down button| Increases and decreases audio volume.
9| Power button| Turns the display on and off. Press and release to power on
the device. Press and hold to reset the device or power off.
10| Charging indicator LED| Indicates power state and battery charging status
while charging and application generated notifications.
11| USB-A port| Provides USB host and client communications.
12| Threaded Insert| Use to restrict access to the USB ports in hazardous
locations (requires boot).
13| USB-A port| Provides USB host and client communications.
14| USB-C port| Provides USB host and client communications, and device
charging via cables and accessories.
15| Scanner window| Provides data capture using the imager.
16| Dock interface connector| Provides communication to the device from the
dock.
17| Speakers| Provides audio output.
18| Keyboard latch slot| Attaches the keyboard to the tablet.
19| Keyboard alignment slot| Assists in aligning the tablet with the keyboard.
20| Keyboard interface connector| Provides power and communication with the
keyboard
21| Kensington security slot| Use with a security cable to lock the tablet to
the keyboard.
22| Power interface connector| Provides power to the device through the dock.
1 | Rear microphones | Use for audio recordings. |
---|---|---|
2 | Dock alignment slot | Assists in aligning the tablet with the dock. |
3 | Pass-through antenna | Use to connect to an external antenna. |
4 | Front camera privacy cover switch | Use to cover the front camera when not |
in use.
5| Rear camera privacy cover| Use to cover the rear camera when not in use.
6| Rear camera LED flash| Provides illumination for the camera.
7| Scan button| Initiates barcode data capture when a scan-enabled application
is active (programmable).
8| Fingerprint sensor| Provides biometric authentication.
9| Rear camera| Autofocus camera that takes photos.
10| Communication expansion port| For Ethernet and serial communication
through the expansion adapter.
11| NFC antenna position| Use to read NFC cards.
12| Battery cover| Provides access to the replaceable battery.
13| Solid State Drive Cover| Provides access to the solid state drive.
Setting Up the Device
To start using the device for the first time:
- Install a nano SIM card (optional for ET85 only).
- Charge the device.
- Power on the device.
Installing a nano SIM Card
- Ensure the tablet is powered off.
- Lift the notched corner of the battery cover and carefully lift the battery cover off the device.
- Slide the battery lock switch to the unlock position.
- Using index fingers, life the battery up.
- Insert the nano SIM card with the contacts facing up.
- Push the SIM card in and ensure that it locks into place.
- If required, install the SIM lock plate and secure with the M1.4 x 2 mm screw using a Phillips #0 screwdriver. The maximum torque for the screw is 1 kg/m (7 lb/ft).
- Replace the battery, ensuring it is seated properly.
- Slide the battery lock switch to the lock position. CAUTION: Be aware of the orientation of the battery cover. Failure to replace the battery cover properly may cause damage.
- Align the tabs on the underside of the cover with the slot around the battery well.
- Ensure that the chamfer on the battery cover is at the bottom left corner of the device.
- Carefully press down around the edges of the cover. Make sure that the cover is seated properly.
Device Charging
CAUTION: Ensure that you follow the guidelines for battery safety
described in the device Product Reference Guide.
Before using the tablet for the first time, connect it to an external power
source. Keep the tablet connected to the external power source until it is
fully charged. The Charging Indicator LED turns green when the tablet is fully
charged. You may use the tablet while it is charging.
For the best charging experience, Zebra recommends using the ET80/ET85 dock or
the Zebra USB-C to AC adapter.
The tablet main battery charges from fully depleted to 90% in approximately 2
hours and from fully depleted to 100% in approximately 3 hours.
Charging Indicators
The Charging Indicator LED illuminates and changes color to indicate battery
status.
State | Indication |
---|---|
Off | Device is not charging. Device is not inserted correctly in the cradle or |
connected to a power source. Charger/cradle is not powered.
Amber| Device is charging.
Green| Connected to external power and the tablet is fully charged.
Red| Charging error. For example:
• Temperature is too low or too high.
• Charging has gone on too long without completion (typically 8 hours).
• Battery is not installed.
Charging Temperatures
Charge batteries in ambient temperatures from 0°C to 45°C (32°F to 113°F). The
tablet or dock always performs battery charging in a safe and intelligent
manner. To accomplish this, for small periods of time, the charger alternately
enables and disables battery charging to keep the battery at acceptable
temperatures.
Charging Accessories
Use one of the following accessories to charge the tablet.
Accessory | Part Number | Description |
---|---|---|
Power Only Dock | CRD-ET8X-PWRDK1-01 | Provides tablet charging only. Requires |
power supply (PWR-BGA15V45W-UC-WW) with country specific AC line cord.
Vehicle Dock| CRD-ET8X-VEHDK1-01| Provides tablet charging, USB communication,
Ethernet communication, and HDMI.
Office Dock| CRD-ET8X-OFFDK1-01| Provides tablet charging, USB communication,
Ethernet communication, and HDMI. Includes stand. Requires power supply
(PWR-BGA15V45W-UC-WW) with country specific AC line cord.
USB-C to AC adapter| PWR-BGA15V45W-UC-WW| Provides tablet charging only.
Requires country specific AC line cord.
CAUTION: Ensure that you follow the guidelines for battery safety
described in the device Product Reference Guide.
Charging Using the Dock
When the tablet is docked and charging, the charging indicator LED illuminates
amber.
- Connect the dock to the appropriate power source.
- If installed, ensure the keyboard and handle are closed.
- Insert the bottom of the tablet into the bottom of the dock (1), aligning the charging contacts on the tablet with the connector pins on the dock.
- Rotate the top of the tablet towards the top of the dock (2).
- Use your thumb to push the tablet into the dock, then push the lever down to secure the tablet.
- After the tablet is secured in the dock, you can lower the keyboard (optional).
Removing the Tablet
- If installed, ensure the keyboard is closed.
- To remove the tablet from the dock, lift the lever on top of the dock (1) to release the tablet, rotate the top of the tablet down (2), then lift the tablet out of the dock (3).
Charging Using the USB-C to AC Adapter
Use the USB-C to AC adapter to charge the tablet.
- Plug the AC line cord into the USB-C to AC adapter (1).
- Plug the AC line cord into the AC wall outlet (2).
Power Only Dock
The Power Only Dock provides:
- Power for operating the device.
- Charging for the device’s battery and optional Power Pack installed in an Expansion Back.
- Barrel lock and two keys to secure the tablet to the dock.
- Support for VESA 100 x 100, 100 x 50, and 75 x 75.
1 | Power module |
---|---|
2 | Barrel lock (two keys included) |
3 | Lever |
Vehicle Dock
The Vehicle Dock provides:
- Power for operating the device.
- Charging for the device’s battery and optional Power Pack installed in an Expansion Back.
- Ports for connecting USB devices and Ethernet communication.
- Barrel lock and two keys to secure the tablet to the dock.
- Support for VESA 100 x 100, 100 x 50, and 75 x 75.
1 | Power module |
---|---|
2 | Barrel lock (two keys included) |
3 | Lever |
Office Dock
The Office Dock provides:
- Power for operating the device.
- Charging for the device’s battery and optional Power Pack installed in an Expansion Back.
- Ports for connecting USB devices, HDMI video output, and Ethernet communication.
- Barrel lock and two keys to secure the tablet to the dock.
- Desktop mount.
1 | Power module |
---|---|
2 | Barrel lock (two keys included) |
3 | Lever |
4 | Desktop mount |
Powering On the Tablet
- Press and hold the Power button for at least one second, then release.
Scanning with Internal Imager
To read a barcode, a scan-enabled app is required.
-
Ensure that an app is open on the tablet and a text field is in focus (text cursor in text field).
-
Point the scanner exit window at a barcode.
-
Press and hold the Scan button (1). The aiming pattern turns on to assist in aiming.
-
Ensure the barcode is within the area formed by the aiming pattern. The aiming dot increases visibility in bright lighting conditions.
A beep sounds to indicate the barcode was decoded successfully. When the Internal Scanner is in Pick List mode, the tablet does not decode the barcode until the aiming dot touches the barcode. -
Release the scan button. The captured data appears in the text field.
Using the Camera
- Ensure the front camera privacy cover (1) or rear camera privacy cover (2) is open.
- Open the camera application. The Camera Indicator LED illuminates.
- Point the camera at an object.
- Touch the on-screen shutter button to take a photo or record a video.
Reading NFC Cards
The tablet supports reading NFC cards. The NFC antenna is located on the back
of the tablet under theNFC logo.
With an NFC enabled application open, bring the NFC card toward the antenna.
Depending upon the application, an audio or visual indication indicates
successful reading of the card.
Keyboard
The ET80/ET85 attachable rugged keyboard is a QWERTY keyboard that provides a
multi-color backlight and six programmable keys.
For information on configuring the programmable keys, refer to the ET80/ET85
Product Reference Guide.
1 | Keyboard latch | Attaches the keyboard to the tablet. |
---|---|---|
2 | Keyboard alignment pin | Assists in aligning the keyboard with the tablet. |
3 | Tablet interface connector | Provides power and communication from the |
tablet.
4| Keyboard alignment marking| Use to assist in aligning the tablet and
keyboard.
5| Locking switch| Use to unlock the keyboard from the tablet.
6| Programmable keys| Configure to perform custom actions.
7| Touchpad| Use to move the cursor, scroll, tap, double-tap, drag and drop,
and make multiple text selections.
8| Right button| Use to perform right-clicks.
9| Left button| Use to perform left-clicks.
1| Kensington lock mount location| Use with a security cable to lock the
tablet to the keyboard.
---|---|---
2| C1D2 screw lock location| Use the screw provided with your C1D2 keyboard
order to lock the keyboard position.
Attaching the Keyboard
- Place the keyboard on a flat and level surface.
- Align the keyboard alignment markings on the tablet and keyboard.
- Gently press the tablet down onto the keyboard until you hear a click.
When the keyboard is correctly installed, the keyboard locking switch automatically clicks into the lock position and the orange indicator is hidden under the switch.
Removing the Keyboard
-
Place the tablet on a flat and level surface.
-
Ensure the keyboard and tablet are in the open position.
-
Move the keyboard locking switch to the Unlock position.
When in the unlock position, the orange indicator is visible to the left of the switch. -
Lift the tablet from the keyboard.
Expansion Backs
The Expansion Backs provide a Power Pack slot for the device and either a hand
strap or Smart Card CAC reader.
Installing the Expansion Backs
- Power off the tablet before installing or removing the Expansion Back.
- Lift the notched corner of the battery cover and carefully lift the battery cover off the device. Store the cover in a safe place.
- Align the expansion back with the device. Ensure that the power pack slot cover is aligned with the bottom of the device and the interface connector on expansion back aligns with interface connector (1) on device.
- Using a T6 Torx screwdriver, secure expansion back to device using four screws. Torque to 14 n-cm.
Documents / Resources
|
ZEBRA ET8x ET85B-3P5B2-CFC Rugged
Tablet
[pdf] User Guide
ET8x ET85B-3P5B2-CFC, ET85B-3P8B2-CFC, ET8x ET85B-3P5B2-CFC Rugged Tablet,
Rugged Tablet, Tablet
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>