VHS-6725-0-BRB Low Voltage Landscape Lighting Instruction Manual

: June 13, 2024
: VOLT

Table of Contents

VHS-6725-0-BRB Low Voltage Landscape Lighting
Product Information
Product Usage Instructions
INSTALLATION INSTRUCTIONS
IMPORTANT SAFETY INFORMATION
Package Contents
Product Dimensions
INSTALLATION
IR Remote Functions
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

VHS-6725-0-BRB Low Voltage Landscape Lighting

Product Information

The VHS-6725-0-BRB is a luminaire designed for installation in accordance with local codes and the National Electric Code (NEC). It is intended to be used with a power supply (transformer) rated maximum of 300 watts (25 AMPS) at 15 volts. The luminaire is suitable for outdoor use and requires UL-listed wire connectors for wiring connections. The main low-voltage cable is intended for shallow burial of less than 6 inches (152 mm).

Product Usage Instructions

Before installing or servicing the luminaire, make sure that the power is turned OFF.
Ensure that all luminaires are installed at least 10 feet (3.05M) away from pools, spas, or fountains to avoid the risk of electrical shock.
Install the puck light to the GU5.3 base socket by pushing the pins into the socket properly. The puck light must be mounted in an inverted position, facing downward.
If using the optional IR Remote, follow these steps:
Remove the battery compartment cover from the IR Remote by pressing the tab and lifting it.
Insert two AAA batteries into the battery compartment properly.
Place the battery compartment cover back onto the IR Remote.
The IR Remote functions are as follows:
On
Off
Brightness Control
16 color selections
Flash
Strobe
Fade
Smooth

Refer to the product manual for detailed instructions on using the different modes and functions of the IR Remote.

INSTALLATION INSTRUCTIONS

Important: Please Read Before Installation
This luminaire is intended for installation in accordance with local codes and the National Electric Code (NEC). Failure to adhere to these codes and instructions may result in serious injury, and property damage and void the warranty. These instructions do not intend to cover all variations in installation, operation maintenance, or mounting situations.

Make sure that the power is turned OFF before installing or servicing this luminaire.
WARNING: risk of electrical shock. Install all luminaires 10 feet (3.05M) or more from the pool, spa, or fountain.
This luminaire is intended to be used only with a power supply (transformer) rated maximum of 300 watts (25 AMPS) at 15 volts.
Wiring connections must be made with UL-listed wire connectors that are suitable for outdoor use.
Position the low voltage wire and wire connector so that it is located within 6 inches (15.2 cm) from a building structure, a luminaire, or a fitting.
The main low-voltage cable is intended for shallow burial – less than 6 inches (152 mm).

IMPORTANT SAFETY INFORMATION

INSTRUCTIONS PERTAINING A RISK OF FIRE, OR INJURY TO PERSONS Lighted lamp is HOT!
WARNING – To reduce the risk of FIRE OR INJURY TO PERSONS.

Turn off/unplug and allow to cool before replacing the lamp.
The lamp gets HOT quickly! Contact only switch/plug when turning on.
Do not touch the hot lens, guard, or enclosure.
Keep lamps away from materials that may burn.
Do not touch the lamp at any time. Use a soft cloth. Oil from the skin may damage the lamp.
Do not operate the luminaire fitting with a missing or damaged shield. SAVE THESE INSTRUCTIONS

Package Contents

A. (1) Puck Light

Product Dimensions

NOTE: PUCK LIGHT MUST BE MOUNTED IN AN INVERTED POSITION – FACING DOWNWARD

INSTALLATION

Install Puck Light to GU5.3 Base Socket
Install the puck light to the GU5.3 base socket by pushing the pins into the GU5.3 base socket properly.

IR Remote (Optional)
An IR Remote is optional for this fixture. The IR remote requires two AAA batteries.

Remove the Battery compartment Cover
Press the tab and lift the battery compartment cover to remove it from the IR Remote.

Install Two AAA Batteries

Place two AAA batteries into the battery compartment properly.

Install the Battery compartment Cover

Place the battery compartment cover back onto the IR Remote.

IR Remote Functions

On
Off
Brightness Control
16 color selections
Flash
- A. Mode 1: Repeats Red, Green, Blue + color cycle for 1-second duration of each of the seven colors within this mode.
- A. Mode 2: Hit flash a second time and this mode slowly blends the same seven colors from mode one, mixing them together.
Strobe
- A. Mode 1: Pick any color on the remote, then press strobe, and that color will strobe every second alternating between on and off.
- A. Mode 2: Hit strobe a second time and this mode will strobe a blended white color at the same speed as before.
Fade
- A. Mode 1: Pick any color on the remote, then press fade and that color will slowly fade on and off every second.
- A. Mode 2: Hit fade a second time and it will fade a blended white color on and off at the same speed as before.
Smooth
- A. Mode 1: Repeats a flash cycle of Red, Green, and Blue only.
- A. Mode 2: Hit smooth a second time and this mode slowly blends Red, Green, and Blue only; on and off at the same speed.