CREALITY CR-10 S5 3D Printer with CR Touch Leveling Owner’s Manual

CR-10 Series 3D Printer
Guide Book
To make Top-quality 3D printer
To be the Chief Evangelist

CR-10 S5 3D Printer with CR Touch Leveling

• This guide is for the CR-10 Series of 3D printers. It is also applicable for the CR-10S/CR-10 S4/CR-10 S5.
• Among them, CR-10 mini without T-Bracket (Right) & Decoration Strip.
• Due to the different types of device in the hardware and software upgrade industry. the products are slightly different and it is a noemal phenomenon. Subject to actual product received.
• Detailed instructions for use are available on the SD card.

Notes

1. Do not use the Printer in any other way than described herein to avoid personal injury or property damage.
2. Do not place the Printer near flammables, explosives or heat sources. It is best to place it in a well- ventilated, low-dust environment.
3. Do not expose the Printer to violent vibration or any unstable environment. This will cause poor print quality.
4. The filaments recommended by the manufacturer are preferred as to avoid clogging in the extrusion head or Printer damage.
5. Do not use any other power cable except the one supplied. Use a grounded three-prong power outlet.
6. Do not touch the nozzle or hot bed during printing. Keep hands away from machine while in use to avoid burns or personal injury.
7. Do not wear gloves or loose clothing when operating the Printer. Preventing the movable parts from being involved in the squeeze or cutting injury to hunman boday or printer damage.
8. Clean off filament from the nozzle tip with the provided pliers before the nozzle cools. Do not touch the nozzle directly. This can cause personal injury.
9. Clean the Printer frequently. With the machine powered off, ¢ lean the printer body with a dry cloth to remove dust, adhered printing materials and foreign objects on guide rails. Use glass cleaner or isopropyl Alcohol to clean the print surface before every print for consistent results.
10. Children under 10 years of age should not use the Printer without supervision.

Preface

Dear consumers,
Thank you for choosing our products. For the best experience, please read the instructions before operating the Printer. Our 3D team is always ready 10 provide you with assistance, Please contact us via the phone number or e-mail uddress provided at the end when you encounter any problem with the Printer.
For a better experience in using our product, you may learn how (o use the Printer in the following ways:

1. View the accompanied instructions and videos on the SD card.
2.  Visit our official website at www.creality3d.cn. You will find relevant software/hardware information, contact details and operation and maintenance instructions on the website,

Introduction

1. Control Box
2. Spool Holder
3. Nozzle Assembly
4. Z Gantry Frame
5. Print Surface| 6. Base Frame
7.SD Slot and USB Port
8. Voltage Selection
9. Control Knob
10. Display Screen| 11. X Stepper
12. X Limit Switch
13. Extruder (E) Stepper
14.’Y Stepper
15.Y Limit Switch|

16. Z Stepper

17. Z Limit Switch

18. Nozzle Assembly Connection

19. Hot Bed Connection

20. Power Cable Connection

---|---|---|---

General List

Tool list

Device Installation

Install the Gantry Frame

*CR-10 mini without T-Bracket (right),

Install the Spool Holder and Bracket

Install the decorative teem

• The Decorative I rim is available in various colors. The pictures above are for reference only.
• CR-10 mini without Decoration Strip.

Cable connection

Now your 3D printer is assembled!

Connect the Stepper M otors according to the
yellow Labels o the Open (4-wire) side.

Connect the Limit Switches according 10 the yellow
Tables on the 3pin (2-wire) side.

Connect the aviation connectors to the ports with corresponding pins

• Select the Correct input voltage to match your local mains (220V or 110V)
• Damage can ocher if voltage is set incorrectly
• Make sure the power Cable is connected.

Screen Information

Information Displayed

Screen Options

↑ Menu↑| Sub Menu| Explanation
↑ info Screen↑| ↑ main↑| Return
Prepare→| Disable Steppers| Moving X Y Z axis by your hands
Auto Home| return to the origin
Preheat PLA|
Preheat ABS|
Cooldown| Close and
cooldown the nozzle
Move Axis →| Moving X Y Z axis or Extruder by given value.
Control→| Temperature →| Heat the nozzle and the bed or change fan speed by given value
Restore Failsafe| Restore factory setting
No card
/Print from SD| Select the printing model
INIt SD-Card /Change SD- Card| download or update
card| the memory information
Printing
Tune→| Speed| Change Printing Speed by given value
Nozzle| Change the temperature by given value
Bed| Change the temperature by value given
Fan Speed| Change Fan Speed by given value
Flow| Change filament flow by given value
pause Print|
Stop print|

Loading Filament

1. Preheat Method 1 Mathhood 2
2. Feeding

Press and hold the extruder lever then insert 1.75mm filament through the small hole of the extruder. Continue feeding until you see filament come out the nozzle.

Tip: How to Replace the Filament ?

1.  Cutting filament near the Extruder and slowly feed new filament until they are fed into the new filament. Preheating the nozzle and withdraw the filament quickly and feed the new filament.

Bed Leveling

1. Prepare→ Auto Home.
   Wait for the nozzle 1o move to the left/front of the platform. Hain Disable Steppers Auto H  reheat PLA

2. Prepare →Disable Steppers (Close Stepper Drive , Relase Motor )

3. Move the nozzle the front/left leveling screw and adjust the platform height by turning the knob underneath. U se a piece of A4 paper (standard printer paper) to assist with the adjustment, making sure that the nozzle lightly scratches the paper.

4. Complete the adjustment of the screw on all 4 corners.

5. Repeat above steps 1-2 times if necessary.

Software Installation

1. Double click the Cura icon to install the Cura Slicing Software.
2. Start Cura 3.0.2 from the Start Menu.
3. Select Other→ Coevality CR-10>Add Printer.
4. If your machine model is CR-10Mini,Please select setting– printer– manage printer and modify the printer settings to (300,220,300)

For the first Printing

1. Slicing
   Insert SD ecard into computer with Reader.

2. Printing

Trouble shooting

After- Sales Service

After-Sales Service Terms

1. We provide a I 2-month ‘v UMW), on 31) printers (excluding the nozzle assembly) purchased on or after January I. 2017 and a 3-month warranty on the nozzle assembly thereof. Products purchased before January I, 2017 whose warranty periods have not expired are subject to the original warranty terms.
2. The warranty period of each product starts from the date of production. Any product with renewed warrant), period is subject to the renewed warranty terms.
3. Within the warranty period, we will provide free accessories to replace those damaged during the operation in accordance with the instructions for use which are not caused by user negligence (determined by our professional assessment).
4. We will continue to provide warranty services fix any product having been repaired as long as its warranty period has not expired.
5. ln case of any problem, you may find the solutions in the instructions for use or search for the solutions on our official website (www.cxsw3d.com) or contact us via phone or email.
6. We provide free remote technical support for every consumer during the service life of the product. You may request solutions from our after-sales team via phone or email within working hours. For any request submitted beyond the normal working hours, we will reply as soon as possible.
7. Please provide completed after-sales service card or S/N number when applying for the warranty service. Otherwise, warranty services may he refused.
8. We are entitled to refuse warranty claims for any fault or damage due to failure to follow instructions for use, including but not limited to ( 0 unauthorized modification; (ii) incorrect installation or use: (iii) use of any third-party component: (iv) use of any non-specified software; (v) use of low-quality filament; (vi) use under non-specified environment; and (v ii) misuse (overload) or improper maintenance ( corrosion or oxidation).
9. We are entitled to refuse to provide warranty services for any fault or damage due to force majeure, including but not limited to lire, earthquake, lightning stroke, flood, violent conflict, etc.
10. We provide after-sales services between 8:30 and 21:30 every clay from Monday to Saturday, except official holidays.

https://www.facebook.com/groups/1700252256935330/

Shenzhen Creality 3D Technology CO.,LED.
AfterSalesServiceTel: 400-6133 882
Official Website: www.crealityad.cn
Company Address: 12F, Building No.3, Jinchengyuantadustrial Area, HuafanRoad,
Dalang, Longhua, henzhen, Guangdong Province

References

• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>