LUCiDE 21221/01/30 LEANNE Wall Light Instruction Manual

June 12, 2024
LUCIDE

LUCiDE-logo

LUCiDE 21221/01/30 LEANNE Wall Light

Product Information

Thank you for purchasing a Lucide original! This manual will guide you through the installation process and provide information about our brand and collection.

Lucide aims to inspire and illuminate clients by offering trendy, high- quality, and affordable lighting. We welcome you to the community of

illuminatesyourworld.

Discover our entire collection on our website and watch our brand video to get a glimpse behind the scenes at Lucide. See how others around the world use Lucide products and follow us for the latest lighting trends.

For more specifications, dimensions, or information about this product, please visit www.lucide.com.

Product Usage Instructions

Product Name: Lucide Light
Item Number: 21221/01/30
EAN Code: 5411212211088

General Specifications:

  • Dimensions (LxWxH): 14.5cm x 10cm x 12cm
  • Main Material: Metal
  • Ceiling Rose Material: Metal
  • Color: Black
  • Style: Modern
  • Shape: Corner-Shaped
  • Weight: 0.25kg

Technical Specifications:

  • Dimmable: Yes
  • Light Direction: Around (Diffuse)
  • Adjustable in Height: Not Adjustable
  • Directional: Not Directional
  • Cable: No Cable on Product
  • Sensor: Without Sensor
  • Control: Light Switch Control
  • Power Supply: Adapter / Power Grid
  • IP-Class: 20
  • Electric Class: 1
  • Number of Light Sources: 1
  • Lamp Socket: E27
  • Maximum Wattage: 40W
  • Power Requirements: 220-240V~50Hz
  • Warranty: 2 Years

Safety Instructions:

  • This item is only suitable for indoor use, excluding the bathroom, unless a higher IP degree permits its use in the bathroom.
  • IP 44: Protection against water splashes.
  • Legislation requires that all electrical and electronic equipment must be collected for reuse and recycling. Equipment marked with the symbol for separate collection must be returned to a municipal waste collection point.
  • Class I: The product is grounded. The grounding wire (green-yellow) must be connected to the mass connection (marked with this symbol).
  • Class III: The product is only suitable for lower voltage supply and should not be connected to the grounding wire.
  • IP 20: Protection against touch with a finger.
  • If the protective glass is damaged or broken, it must be replaced immediately.
  • Respect the minimum distance between the lamp and flammable objects.

DISCOVER OUR COLLECTION

Visit our website and discover our entire collection

CURIOUS ABOUT OUR BRAND

Our brand video gives you a glimpse behind the scenes at Lucide

ILLUMINATESYOURWORLD

Take a look at how others around the world use Lucide products

  • Item number: 21221/01/30
  • EAN code: 5411212211088

RECOMMENDED LUCIDE LIGHT SOURCE

49032/05/62

  • Dimmable: Yes
  • Included: No

General

  • Dimensions LxWxH: 14,5cm x 10cm x 12cm
  • Main material: Metal
  • Ceiling rose material: Metal
  • Color: Black
  • Style: Modern
  • Shape: Corner-Shaped
  • Weight: 0,25kg

Specifications

  • Dimmable: Yes
  • Light direction: Around (Diffuse)
  • Adjustable in height: Not In Height
  • Adjustable Directional: Not Directional
  • Cable: No Cable On Product
  • Sensor: Without Sensor
  • Control: Light Switch Control
  • Power supply: Adapter/Power Grid
  • IP-Class: 20
  • Electric Class: 1
  • Number of light sources: 1
  • Lamp socket: E27
  • Maximum wattage: 40W
  • Power requirements: 220-240V~50Hz
  • Warranty: 2 Years

DIMENSIONS

LUCiDE-21221-01-30-LEANNE-Wall-Light-fig-
\(2\)LUCiDE-21221-01-30-LEANNE-Wall-Light-fig-
\(3\) LUCiDE-21221-01-30-LEANNE-Wall-Light-fig-
\(4\)

For more specifications or dimensions of this product please visit www.lucide.com

Safety Instructions

Please read this notice carefully and keep it during the lifetime of this product. Follow the instructions for a safe and correct instal-lation and functioning of the light fixture. The manufacturer does not accept any responsibility for damage caused by improper installation and service. Installation should always be done by a qualified electrician. Always isolate the power before commencing installation, maintenance or repair. In case of doubts, please contact a qualified electrician. Please pay attention to locations where the item can be installed (indoor, outdoor, bathroom (for outdoor and bathroom installa-tion, please see further). Indoor items cannot be used in humid places. Do not put the item in contact with water or any liquids orinflammable products. Always respect the minimal distance (indicated on the light) to inflammable products. During installation, make sure that the cables will not be squeezed or damaged by sharp edges. If the external flexible cable is damaged, it needs to be replaced exclusively by the manufacturer, his service agent, or a qualified electrician. This is to avoid all risks. Because the temperature of the item and the bulbs can get very high, they must cool down before being touched. Always use the correct bulb (respect type and maximal wattage as indicated on the product).

Explanation of the symbols which can appear on the fixture

  • This item is only suitable for indoor use, exclusive bathroom  (except if a higher IP degree permits that the item can be used in the bathroom).
  • Legislation requires that all electrical and electronic equipment must be collected for reuse and recycling. Electrical and electronic equipment marked with this symbol indicating separate collection of such equipment must be returned to a municipal waste collection point.
  • Class I : The item has an earth connection. The earth wire (green-yellow) needs to be connected to the earth connection (marked with this symbol).
  • Class II : The item is double insulated and must not be connected to the earth wire.
  • Class III : The item is only suitable for lower voltage supply and must not be connected to the earth wire.
  • IP 20 : Protection against contact with a finger
  • If the protection glass is damaged or broken, it needs to be replaced immediately.
  • Please respect the minimum distance from the bulb to inflammable objects.

Warranty declaration:

Lucide NV warrants that the products supplied will be free from defects in material and workmanship for a period of 2 years from the date of purchase by the end user, if the item is installed and maintained properly as mentioned in the user manual.
Exclusions for the warranty:

  1. Broken glass parts of the fixture will only be replaced within 14 days after purchasing by the end user.
  2. Normal wear and tear, discoloring as a result from normal use.
  3. Damage caused by external causes like fire, water, wrong use/ installation or maintenance of the product. For warranty claims the customer needs to hand over defective fixture/part and the original purchase ticket.

Further explanations can be found on our website. www.lucide.com

LUCiDE-logoLUCIDE NV

LUCIDE NV BISSCHOPPENHOFLAAN 145, 2100 DEURNE, BELGIUM info@lucide.com tel: +32(0)3 366 22 04 www.lucide.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals