BRESSER 1028207-36-2023 Childrens Metal Detector Instruction Manual

BRESSER 1028207-36-2023 Childrens Metal Detector

Product Information

The Metal Detector is a device used for detecting metallic objects. It comes with a pre-assembled structure and features an LCD screen, LED indicator, signal tone, and a search coil. The device requires 1x Alkaline battery (9V) for operation, which is not included in the package. The Metal Detector is manufactured by Bresser GmbH and comes with a warranty.

Product Usage Instructions

1. Inserting Batteries:
   • Open the battery compartment using a screwdriver.
   • Follow the polarity information (+)(-) on the inside of the compartment to correctly place the battery.
   • Do not force the battery with reversed polarity as it may damage the device.
   • Replace the battery door and tighten it with a screwdriver.
2. Rules of Metal Detection:
   • Check and comply with the local rules and laws regarding the use of metal detectors.
   • Obtain permission from the property owner before using the metal detector on private property.
   • Avoid damaging historical or archaeological objects.
   • If unsure about an object, consult a nearby museum or historical society.
   • Fill in any holes and minimize damage while using the metal detector.
   • Dispose of any rubbish or litter found during the operation.
3. Operating the Metal Detector:
   • The Metal Detector comes pre-assembled. Install the battery (not included) before use.
   • To adjust the length, turn the locking ring on the shaft of the metal detector counterclockwise.
   • Position the coil flat to the ground while in use.
   • Lock the length of the shaft by turning the locking ring clockwise.
   • To adjust to a smaller unit, loosen the locking rings and position the head close to the handle.
   • Before powering on, ensure the search coil is away from any metal objects.
   • Turn on the device by moving the toggle away from you.
   • A green light indicates that the device is powered on and self-calibrated.
   • The Metal Detector is now ready to be used in the most sensitive detection setting.

Visit our website via the following QR Code or web link to find further information on this product or the available translations of these instructions.

MANUAL DOWNLOAD:

www.bresser.de/P9110550

General Warnings

• Children should only use the device under adult supervision. Keep packaging material, like plastic bags and rubber bands, out of the reach of children, as these materials pose a choking hazard.
• Not suitable for children under 3 years!
• RISK of property damage — Do not disassemble the device. In the event of a defect, please contact your dealer. The dealer will contact the Service Centre and can send the device in to be repaired, if necessary.
• RISK of ELECTRIC SHOCK — This device contains electronic components that operate via a power source (batteries). Children should only use the device under adult supervision. Only use the device as described in the manual; otherwise, you run the risk of an electric shock.
• RISK OF CHEMICAL BURN — Keep batteries out of the reach of children! Make sure you insert the batteries correctly. Empty or damaged batteries could cause burns if they come into contact with the skin. If necessary, wear adequate gloves for protection.
• RISK OF FIRE/EXPLOSION! — Do not expose the device to high temperatures. Use only the recommended batteries. Do not short-circuit the device or batteries, or throw them into a fire. Excessive heat or improper handling could trigger a short circuit, a fire, or an explosion.
• Use only the recommended batteries. Always replace weak or empty batteries with a new, complete set of batteries at full capacity. Do not use batteries from different brands or with different capacities. Remove the batteries from the unit if it has not been used for a long time.
• Never recharge normal, non-rechargeable batteries. This could lead to an explosion during the charging process.
• Rechargeable batteries are only to be charged under adult supervision.
• Rechargeable batteries are to be removed from the toy before being charged
• The manufacturer is not liable for damage related to improperly installed batteries!

Scope of delivery
Metal detector, Instruction manual

Insert batteries

Battery Requirements:

• 1x Alkaline battery (9V) (not included)

Open the battery compartment with a screwdriver and follow the polarity information (+)(-) on the inside of the compartment. Do not force the battery into place with the polarity reversed because this can damage the item. Replace the battery door and tighten the door with a screwdriver.

Parts Overview

1. On/off switch
2. LED indicator (green/red)
3. Battery compartment
4. Signal tone (buzzer)
5. LCD screen
6. Stem
7. Locknut
8. Search coil

Rules of Metal Detection

1. Regulations for using metal detectors vary internationally. Be sure to check the local rules and laws before you start.
2. Respect private property and do not enter without the owner’s permission.
3. Never destroy historical or archaeological objects.
4. If you are not sure whether you have found an object, contact a museum or historical society near you.
5. Be sure to fill in all holes and try not to leave any damage.
6. Remove and dispose of any rubbish and litter found.

Operation

1. Your metal detector comes completely assembled. You only need to install the battery (not included) in the metal detector.
2. To adjust the length, turn the locking ring located on the shaft of the metal detector counterclockwise.
3. Adjust to desired length and position the coil to be flat to the ground while in use.
4. Turn the locking ring clockwise to lock the length of the shaft to the desired position.
5. To adjust the length of the metal detector to a smaller unit, loosen the locking rings and position the head close to the handle.

Using your metal detector

Before powering on the device position the metal detector so the search coil is away from any metal objects. Then turn the unit on by moving the toggle on the device away from you. You will see a green light showing the power is turned on. Your unit is self-calibrated and needs no further adjustment. Your metal detector is ready to be used in the most sensitive detection setting.

To search for metal objects, swing the metal detector back and forth slowly while keeping the search coil level and approx. 2 cm above the ground. When your metal detector locates a metal object it will start to emit a tone. The more solid and louder the tone, the stronger the signal, which indicates how close the object is to the coil. Your unit also has a signal light that will illuminate when the signal strength is strong. By using both the signal light and the signal tone you will be able to discover many amazing things just below ground.

• During the search, the LCD display shows [ ]. When the detector finds a metallic object, the red LED lights up. A beep sounds and [ ] appears on the LCD display.
• When the LCD shows [ ], you need to change the battery.

Playfully explore the world with your metal detector:
With the metal detector, you can uncover what metal objects are hidden underground. Whether on the beach or in your garden – interesting discoveries can be made in many places. And it’s very easy to use. Go straight on a discovery tour!

When to use your metal detector:
A great time to go metal detecting is right after a heavy rain when the ground is soft. Wet ground conducts electricity better than dry ground, so you will have a better chance of locating buried objects than you would walking on dry ground.
This metal detector’s detection coil is water resistant, and it can be used in shallow water after rain. However, it is recommended that you do not submerge the unit for extended time periods.

Places to search:

1. The beach is a great place to start because you get a few competing signals on a sandy beach and it will be easier to dig there.
2. At the homes of your relatives–especially those who live in older homes.
3. Your own front and backyards.

CAUTION:
Please note that this metal detector is not designed for any military or disarming use.

Notes on Cleaning

• Before cleaning the device, disconnect it from the power supply (remove batteries)!
• Only use a dry cloth to clean the exterior of the device. To avoid damaging the electronics, do not use any cleaning fluid.
• Protect the device from dust and moisture.
• Remove the batteries from the unit if it is not used for a longer time.

Declaration of Conformity

EC Declaration of Conformity
Bresser GmbH has issued a “Declaration of Conformity” in accordance with applicable guidelines and corresponding standards. The full text of the EU declaration of conformity is available at the following internet address: www.bresser.de/download/9110550/CE/9110550_CE.pdf.

UKCA Declaration of Conformity
Bresser GmbH has issued a „Declaration of Conformity“ in accordance with applicable guidelines and corresponding standards. The full text of the UKCA declaration of conformity is available at the following internet address: www.bresser.de/download/9110550/UKCA/9110550_UKCA.pdf.

Bresser UK Ltd. Suite 3G, Eden House, Enterprise Way, Edenbridge, Kent TN8 6HF, Great Britain

Disposal

• Dispose of the packaging materials properly, according to their type, such as paper or cardboard.

• Contact your local waste-disposal service or environmental authority for information on the proper disposal.

• Do not dispose of electronic devices in the household garbage!
  As per Directive 2012/19/EC of the European Parliament on waste electrical and electronic equipment and its adaptation into German law, used electronic devices must be collected separately and recycled in an environmentally friendly manner.

• Empty, old batteries must be disposed of at battery collection points by the consumer. You can find out more information about the disposal of devices or batteries produced after 6 January 2006 from your local waste-disposal service or environmental authority.

• In accordance with the regulations concerning batteries and rechargeable batteries, disposing of them in normal household waste is explicitly forbidden. Please make sure to dispose of your used batteries as required by law — at a local collection point or in the retail market. Disposal of domestic waste violates the Battery Directive.

• Batteries that contain toxins are marked with a sign and a chemical symbol.

  1. battery contains cadmium
  2. battery contains mercury
  3. battery contains lead

Warranty & Service

The regular warranty period for this product is 5 years and starts on the day of purchase. Please keep the proof of purchase (receipt/invoice) carefully as proof of purchase. During the warranty period, defective devices will be accepted by your local specialist store. Alternatively, you can contact the service center by email at service@bresser.de. Here you can find detailed information about a possible return. In the event of a warranty claim, you will always receive a new or repaired device back free of charge. It is up to the guarantor to decide whether to repair or replace the device.

The guarantee expires if defects in the object of purchase are due to the following circumstances:

• improper usage
• negligent or intentional damage through own fault and/or unauthorized third parties
• negligent or intentional damage by the buyer and/or third parties
• Repairs or alterations carried out by third parties without our order
• Changes or damage due to force majeure (storm, hail, fire, power failure, lightning, flooding, snow damage, frost, and other effects caused by animals, etc.)

The warranty is also void if a damaged and/or illegible or incomplete proof of purchase is presented. Statutory warranty claims, the claim of which is free of charge, remain unaffected.

The guarantor is BRESSER GmbH, Gutenbergstr. 2, 46414 Rhede, Germany.

After the warranty period has expired, you also have the option to send a defective device for repair. Repairs after the warranty period has expired are chargeable. You will receive a cost estimate from us before carrying out the repair.

In case of a return, please note the following:
Before returning an item, please contact the service center via our service@bresser.de email! Make sure the item is shipped carefully packaged. If possible, use the original packaging. Fill out the return form below and include it with a copy of the purchase receipt with the shipment. Unfree shipments cannot be accepted!

Service point:

Bresser GmbH
Returns Processing Gutenbergstr. 2 D – 46414 Rhede Germany.

Every purchase helps support the global nonprofit National Geographic Society in its work to protect and illuminate our world through exploration, research, and education.

TO LEARN MORE, VISIT NATGEO.COM/INFO.

© National Geographic Partners LLC. All rights reserved. NATIONAL GEOGRAPHIC and Yellow Border Design are trademarks of the National Geographic Society, used under license.

Visit our website:
nationalgeographic.com.

• Bresser GmbH Gutenbergstr. 2 DE-46414 Rhede
• www.bresser.de.

Bresser UK Ltd.
Suite 3G, Eden House Enterprise Way, Edenbridge, Kent TN8 6HF, Great Britain.

Errors and technical changes are reserved.

References

• art.no
• Bresser | NATIONAL GEOGRAPHIC Metalldetektor Kids | Expand Your Horizon

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>