GeoVision GV-IPSC10 Speaker System Installation Guide

: June 13, 2024
: GeoVision

Table of Contents

Welcome
Warning
Installation Environment
Features:
Mounting instruction:
Read User Manual Online (PDF format)
Download This Manual (PDF format)

GV-IPSC10 Installation Guide
Network Ceiling Speaker

Welcome

A personal welcome to you from the management and employees of our global.
Thanks you for choosing our high quality product, we will always provide innovative, advanced, reliable products like before.
We are sincerely trust these products will provide years of satisfactory service, but if anything is not to your complete satisfaction, we will endeavor to make things right.
Welcome again, and thank you for becoming part of our worldwide extended family!

Warning

This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’ s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
This symbol is intended to alert the user to the presence of important operation and maintenance (servicing) instructions in the literature accompanying the appliance.
Caution: To prevent electric shock do not use this (polarized) plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade expo-sure.

WARNING
To prevent fire or shock hazard, do not expose the unit to rain or moisture.

Do not install this equipment in a narrow space environment such as bookshelves, wooden tables and other similar items.
This equipment should not be used in rain or wet environment. Otherwise, this device will be damaged.
For the terminals marked with symbol of “A” may be of sufficient magnitude to constitute a risk of electric shock. The external wiring connected to the terminals requires installation by an instructed person or the used of ready- made leads or cords.
The apparatus shall not be exposed to dripping or splashing and that objects filled with liquids, such as vases, shall not be placed on apparatus.
The appliance coupler is used as disconnect device, the disconnect device shall remain readily operable.
protective earthing terminal. The apparatus should be connected to a mains socket outlet with a protective earthing connection.
Increase the minimum distance of the prototype to the surrounding environment.
no naked flame sources, such as lighted candles, should be placed on the apparatus;
The use of apparatus in tropical climates.
The use of apparatus in moderate climates.
Do not install this equipment in a confined space such as a book case or similar unit.
The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such vases, shall be placed on the apparatus.
Worded: “WARNING FOR YOUR PROTECTION PLEASE READ THE FOLLOWING-WATER AND MOISTURE: Unit should not be used near water(e.g. near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc).
Care should be taken so than objects do not fall and liquids are not spilled into the enclosure through openings.”

Service Instructions
Worded: “Caution: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.”
Location: Instruction Manual.

NOTE : This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Installation Environment

Installation this system is not difficult and complex. But you still need to spend some time to read this manual and ensure the connection and installation is exact.
Never place this product in an environment which could alter its performance or reduce its service life.
Such environments usually include high levels of heat, dust, moisture, and vibration.

Important Safety Instructions

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparaus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
– Avoid excessive heat, humidity, dust and vibration
Keep the unit away from locations where it is likely to be exposed to high temperatures or humidity-such as near radiators, stoves, etc. Also avoid locations which are subject to excessive dust accumulation, or to vibration that could cause mechanical damage.
– Avoid physical shocks
Strong physical shocks to the unit may cause damage. Handle the unit with care.
– Do not open the case or attempt repairs or modifications yourself
This product contains no user-serviceable parts. Refer all maintenance to qualified service personnel.
Opening the case and/or tampering with internal circuitry voids the warranty.
– Always power off before making connections
Always turn the AC mains OFF before connecting or disconnecting cables. This is important to prevent damage to the unit itself as well as other connected equipment.
– Handle cables carefully
Always plug and unplug cables (including the AC mains power cord) by gripping the connector, not the cord.
– Clear with a soft dry cloth
Never use solvents such as benzine or paint thinner to clean the unit. Wipe clean with a soft, dry cloth.

Features:

Any place with an Ethernet port can be accessed. It can play network audio and can accept the access and control of servers and other IP network devices.
Network fault self-diagnosis, with 24V PoE power supply network port and TCP/IP network port. Compatible with SIP protocol, ONVIF (RTSP) protocol.
Built-in 2*15W stereo digital power ampliﬁer, power ampliﬁer heat low, safe and reliable, suitable for long time work. Simple connection and convenient use.
2-way 6.5″ woofer and 0.75” tweeter coaxial unit, good low and mid frequency response suitable for music and vocals.
With one local audio input or ampliﬁer output (choose one of the two).
Rear cover 2-claw spring installation method.
Metal basin frame, face shield and ﬁreproof metal rear cover.
Suitable for use in hotel, conference room, restaurant, shopping mall and other places.

Note: The GV-IPSC10 network speaker has a 2P phoenix terminal for either connecting a second speaker (Speaker Out) or importing audio files (AUX IN). By default, Speaker Out is enabled. To change the function to importing audio files, see the documentation: https://s3.amazonaws.com/geovision_downloads/Manual/IP_Speaker /Modify_Audio_Out_GV- IPSC10.pdf

Mounting instruction:

First, connect the power cord and network cable to the interface on the back panel of the speaker.
Hole size of the ceiling: Ø 170 x 120H mm, max ceiling thickness: 25mm
Mount the speaker on the ceiling as shown in the figure below.