STEP2 Evertough Vertical Wall Shelf Owner’s Manual
- June 13, 2024
- Step2
Table of Contents
Ever tough Vertical Wall Shelf™
Owner’s Manual
INCLUDED
REQUIRED (NOT INCLUDED)
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
OBSERVE ALL STATEMENTS AND WARNINGS TO REDUCE THE LIKELIHOOD OF SERIOUS OR
FATAL INJURY.
INSTALLATION
- Maximum weight 50lbs (23kg), 25lbs (11.5kg) per shelf.
- Designed for standard 16″ spaced stud mounting.
- Always wear safety glasses during installation.
FOR DRYWALL AND MASONRY MOUNTING:
- Specific hardware such as drywall anchors or masonry lag screws (not included) is required.
- Follow manufacturer’s weight and installation requirements.
CLEANING INSTRUCTIONS:
General Cleaning:
- Use a 50/50 mixture of white vinegar and water.
DISPOSAL INSTRUCTIONS:
Please recycle when possible. Disposal must be in compliance with all
government regulations.
INSPECT THIS PRODUCT PERIODICALLY. REPLACE DAMAGED OR WORN COMPONENTS.
TIP: Follow step 2-3 for just one of the top holes allowing shelf to hang from just one screw. Next – level, drill, and mount second top hole. Finally, drill and mount the remaining two holes.
Locate wall studs and ensure 16″ spacing. Mark center line of studs on wall surface.
NOTE: If 16″ spaced studs are not available, other mounting hardware solutions (NOT INCLUDED) may be required. Follow manufacturers mounting instructions and weight limitations.
Hold
shelf level at desired location and mark holes. Drill 1/4 inch pilot holes at
marked locations.
Please, Call Us First! Please, Call Us First!
DO NOT RETURN TO STORE.
Please, Call Us First!
DO NOT RETURN
TO STORE.
Documents / Resources
|
STEP2 Evertough Vertical Wall
Shelf
[pdf] Owner's Manual
5381, Evertough, Evertough Vertical Wall Shelf, Vertical Wall Shelf, Wall
Shelf, Shelf
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>