Dongguan WL4600 4 In 1 Wireless Charger Deformable Multiple Output Charging Station User Manual
- June 13, 2024
- Dongguan
Table of Contents
WL4600 4 In 1 Wireless Charger Deformable
Multiple Output Charging Station
User Manual
WL4600 4 In 1 Wireless Charger Deformable Multiple Output Charging
Station
4 IN 1 WIRELESS CHARGER
Deformable Multiple Output Charging Station
With Night Light
Product Specification:
Input: 5V=2.4A,9V=3A
Phone Output: 15W/10W/7.5W/5W
Earphone Output: 2.5W
Charging Efficiency: 73%
Total Output: 20W (max)
Watch Output: 2.5W
Charging Distance: C8mm
Input Port: Type-C
Tips: It is recommended to use a power adapter with 20W and above, (this
product does not include a power adapter).
| Short press | Tap and hold |
|---|---|
| On/Off | Enhance/weaken |
DIY: The product comes with 11 pcs different color accessories, 10pcs oneself can be freely paired.
Deformable Multiple Output Charging Station :
Exquisite and Advanced,’ appearance can deform 6 appearances. Deformable
Multiple Output Charging Station.
Package contents :
xl———- Wireless Charger
xl———–USB-C Cable
xll———-Different color accessories
xl———- Magnetic accessory
xl ———-Instruction manual
Troubleshooting:
How to solve the abnormal wireless charging?
- Before use, please make sure that your mobile phone has both wireless charging and MagSafe functions.
- If you need to charge with a case, please use an official MagSafe case from Apple or a MagSafe, Magnetic accessory.
- When a metal foreign object is placed in the charging area, the charger will automatically detect and turn off the power. The product will resume charging after the metal foreign object is removed.
Why does the charger get hot when charging?
During the charging process, there will be a loss in magnetoelectric
conversion loss, which will be converted into heat, so that the mobile phone
and wireless charger will slightly heat up, this is a normal phenomenon.
What is important to note when charging?
After the phone is fully charged, please disconnect the charger from the power
supply in time to avoid continuous heating.
Note:
- It is recommended to use with a wall charger of 20W and above (wall charger is not included).
- Disconnect the charger from the power outlet when not in use. Please use the provided charging cable to connect the charger to the power supply. Uncertified or incompatible power adapters and data cables may cause fire, explosion, or other hazards.
- Do not use this charger in an environment of high temperature. humidity, and strong magnetic field.
- Keep the charger away from people with pacemakers, defibrillators, or other implants, at least 20cm away.
- Wipe this charger and accessories with a dry and clean cloth.
- Do not disassemble and repair this charger by yourself. Improper disassembly may cause electric shock or other safety hazards. if necessary, please contact s after-sales service.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the users authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B dgdal device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against hannful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause hamtul nterference to radio communications. However,
there is no guarantee that interference will not occur h a particular
installation. If this equipment does cause hamlul interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to coned the interference by one or more of
the following measures:
– Reorient or relocate the receiving antema.
– Increase the separation between the equipment and receiver.
– Conned the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
FCC RF exposure statement:
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance between 20cm the radiator your body.
Recycling programs for this packaging
may not exist in your area.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>