Ryobi P737 Portable Cordless Power Inflator Operator’s Manual

: June 13, 2024
: RYOBI

Table of Contents

Ryobi P737 Portable Cordless Power Inflator
GENERAL SAFETY RULES
SYMBOLS
FEATURES
ASSEMBLY
OPERATION
ACCESSORIES
MAINTENANCE
FAQs
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Ryobi P737 Portable Cordless Power Inflator

Ryobi-P737-Portable-Cordless-Power-Inflator-
product

GENERAL SAFETY RULES

WORK AREA

Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.
Keep bystanders, children, and visitors away while operating an inflator.
Distractions can cause you to lose control.
Operate inflator in an open area at least 18 in. away from any wall or object that could restrict the flow of fresh air to ventilation openings.

ELECTRICAL SAFETY

To reduce the risk of electrical shock, do not put inflator in water or other liquid.
Do not place or store appliance where it can fall or be pulled into a tub or sink.
Use this product only with batteries and chargers listed in tool/appliance/battery pack/charger correlation supplement 987000-432.

PERSONAL SAFETY

Stay alert, watch what you are doing and use common sense when operating an inflator.
Do not use inflator while tired or under the influence of drugs, alcohol, or medication.
A moment of inattention while operating inflator may result in serious personal injury.
Dress properly. Do not wear loose clothing or jewelry. Contain long hair.
Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.
Do not overreach. Keep proper footing and balanceat all times.
Proper footing and balance enable better control of the inflator in unexpected situations.
Use safety equipment. Always wear eye protection.
Dust mask, non-skid safety shoes, hard hat, or hearing protection must be used for appropriate conditions.
Eye protection is required to guard against flying fasteners and debris which could cause severe eye injury.
Do not wear loose clothing or jewelry.
Contain long hair. Loose clothes, jewelry, or long hair can be drawn into air vents.
Do not use on a ladder or unstable support. Stable footing on a solid surface enables better control of the inflator in unexpected situations.
Do not disassemble the inflator.
Do not operate inflator near flammable liquids or in gaseous or explosive atmospheres. Internal sparks may ignite fumes.
Do not store your inflator in a damp or wet location.
Do not store in locations where the temperature is less than 50°F or more than 100°F. Do not store in outside sheds or in vehicles.

INFLATOR USE AND CARE

Check hoses for weak or worn conditions before each use, making certain all connections are secure.
Do not use if the defect is found.
Purchase a new hose or notify an authorized service center for examination or repair.
Release all pressures within the system slowly. Dust and debris may be harmful.
Do not use the inflator if the switch does not turn it on or off.
An inflator that cannot be controlled with the switch is dangerous and must be repaired.
Place the switch-off position before making any adjustments, changing accessories, or storing the inflator.
Such preventive safety measures reduce the risk of starting the inflator accidentally.
Store idle inflators out of reach of children and other untrained persons.
Inflators are dangerous in the hands of untrained users.
Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the inflator’s operation.
If damaged, have the inflator serviced before use. Many accidents are caused by poorly maintained tools.
Use only accessories that are recommended by the manufacturer for your model.
Accessories that may be suitable for one inflator may create a risk of injury when used on another inflator.
Keep the inflator and its handle dry, clean, and free from oil and grease. Always use a clean cloth when cleaning.
Never use brake fluids, gasoline, petroleum-based products, or any strong solvents to clean your inflator.
Following this rule will reduce the risk of loss of control and deterioration of the enclosure plastic.
Never point any inflator toward yourself or others.
Keep the exterior of the inflator dry, clean, and free from oil and grease. Always use a clean cloth when cleaning.
Never use brake fluids, gasoline, petroleum-based products, or any strong solvents to clean the unit.
Following this rule will reduce the risk of deterioration of the enclosure plastic.
Do not exceed the pressure rating of any component in the system.
Protect material lines and airlines from damage or puncture.
Keep the hose and power cord away from sharp objects, chemical spills, oil, solvents, and wet floors.

SERVICE

Inflator service must be performed only by qualified repair personnel.
Service or maintenance performed by unqualified personnel may result in a risk of injury
When servicing an inflator, use only identical replacement parts.
Follow the instructions in the Maintenance section of this manual.
Use of unauthorized parts or failure to follow Maintenance instructions may create a risk of shock or injury

SPECIFIC SAFETY RULES

Know your inflator. Read operator’s manual carefully. Learn its applications and limitations, as well as the specific potential hazards related to this tool. Following this rule will reduce the risk of electric shock, fire, or serious injury.
Risk of bursting. Do not operate inflator to result in output pressure greater than marked maximum pressure of item to be inflated. Do not use at pressure greater than 150 PSI.
To reduce the risk of electric shock, do not expose to rain. Store indoors.
Inspect unit for cracks, pin holes, or other imperfections that could cause inflator to become unsafe.
Never cut or drill holes in the inflator.
Make sure the hose is free of obstructions or snags. Entangled or snarled hoses can cause loss of balance or footing and may become damaged.
Use the inflator only for its intended use. Do not alter or modify the unit from the original design or function.
Always be aware that misuse and improper handling of this inflator can cause injury to yourself and others.
Never leave an inflator unattended with the air hose attached to the item being inflated.
do not continue to use a inflator or hose that leaks air or does not function properly.
Always disconnect the air supply and power supply before making adjustments, servicing an inflator, or when an inflator is not in use.
Do not attempt to pull or carry the inflator by the hoses.
Always follow all safety rules recommended by the manufacturer of your inflator, in addition to all safety rules for the inflator. Following this rule will reduce the risk of serious personal injury.
Household use only.
Do not use inflator as a breathing device.
Never direct a jet of compressed air toward people or animals. Take care not to blow dust and dirt towards yourself or others. Following this rule will reduce the risk of serious injury.
Protect your lungs. Wear a face or dust mask if the operation is dusty. Following this rule will reduce the risk of serious personal injury.
Do not use this inflator to spray chemicals. Your lungs can be damaged by inhaling toxic fumes.
Check damaged parts. Before further use of the inflator or air tool, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced by an authorized service center. Following this rule will reduce the risk of shock, fire, or serious injury.
Inspect tool cords periodically and, if damaged, have repaired at your nearest Authorized Service Center. Constantly stay aware of cord location. Following this rule will reduce the risk of electric shock or fire.
Risk of bursting. Carefully monitor objects during inflation.
To reduce the risk of over inflation, use a reliable pressure gauge periodically during inflation. The pressure guage on the inflator is for reference only and is therefore not binding for exact values.
Never leave the inflator unattended during inflation.
Allow pump to cool for five (5) minutes after each five (5) minutes of continuous use. Never block the inflating or deflating outlets while operating.
Save these instructions. Refer to them frequently and use them to instruct others who may use this inflator. If you loan someone this inflator, loan them these instructions also.

SYMBOLS

Ryobi-P737-Portable-Cordless-Power-Inflator-fig-1

FEATURES

PRODUCT SPECIFICATIONS

Hose Length………………………………………………………………………………………………………………………………………………..20 in.
Maximum Pressure……………………………………………………………………………………………………………………………………150 PSI
Duty Cycle……………………………………………………………………………………………………………………5 minutes On/5 minutes Off

ASSEMBLY

WARNING

Do not use this product if it is not completely assembled or if any parts appear to be missing or damaged.
Use of a product that is not properly and completely assembled or with damaged or missing parts could result in serious personal injury.
Do not attempt to modify this product or create accessories or attachments not recommended for use with this product.
Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.

OPERATION

Do not allow familiarity with this product to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury
Since the pressure gauge is not calibrated, and is therefore not binding for exact values, tire pressure must be checked using a reliable measuring device before driving a vehicle with vehicle tires inflated with the inflator.
Driving a vehicle with improperly inflated tires could result in serious injury
Always wear eye protection with side shields marked to comply with ANSI Z87.1. Failure to do so could result in objects being thrown into your eyes resulting in possible serious injury
Do not use any attachments or accessories not recommended by the manufacturer of this tool. The use of attachments or accessories not recommended can result in serious personal injury.

APPLICATIONS

You may use this inflator for the purpose listed below:
Inflating items such as motorcycle, car, and bicycle tires

NOTE : The inflator is not designed for commercial applications.

TO INSTALL/REMOVE BATTERY PACK

To install:

Place the battery pack in the tool. Align the raised rib on the battery pack with groove in the battery port.
Make sure the latches on each side of the battery pack snap in place and that the battery pack is secured in the tool before beginning operation.

To remove:

Depress the latches on both sides of the battery pack to release the battery pack and remove it from the tool.
For complete charging instructions, see the operator’s manuals for your battery pack and charger.

AIR HOSE AND ACCESSORY STORAGE

When the inflator is not in use, press the hose into the storage area on top of the tool.
The inflator can be hung on a pegboard by the holes on top of the tool housing.
When not in use, adaptors and needles provided with the inflator can be placed in the storage area on the base of the tool.

USING THE INFLATOR

Install the battery pack.
Position air chuck clamp in the unlock position perpendicular to the air hose.
Place the air chuck on the valve stem.
Push the air chuck down so that the threaded section of the valve stem is inside the air chuck.
Clamp the end of the air chuck down onto the valve stem by pressing air chuck clamp down until it stops or is parallel with the air hose.

ACCESSORIES

The supplied accessories perform a variety of functions. The tapered adaptor can be used on smaller pinch valves to inflate small items like floats and children’s toys, which usually require the user to inflate them by blowing air into them. The sport ball needle can be used to inflate any type of sports ball or any other item that requires an inflation sport ball needle.

NOTE : When inflating items of 10 PSI or less, inflate in short bursts and check after each burst by feel or with a calibrated measuring device to determine accurate pressure.

SPORT BALL NEEDLE:

Insert sport ball needle into sports ball valve and inflate.
Remove sport ball needle after inflation.

NOTE : Pressure required for most sports balls is too low for accurate reading on tool gauge.

PRESTA VALVE ADAPTOR

Before inflating a tire with a Presta valve, loosen the locking nut on the valve stem to inflate. Once inflation is complete, tighten the locking nut to seal the tire valve.
Loosen the Presta valve locking nut.
Thread the Presta valve adaptor onto the valve stem with the larger open end toward the wheel.
Position the air chuck clamp in the unlock position.
Clamp the end of the air chuck down onto the Presta valve adaptor by pressing air chuck clamp down until it locks into place.
After inflation, remove air chuck and tighten locking nut.

MAINTENANCE

GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc

WARNING :
When servicing, use only identical replacement parts. Use of any other parts can create a hazard or cause product damage.
WARNING :
Always wear eye protection with side shields marked to comply with ANSI Z87.1. Failure to do so could result in objects being thrown into your eyes resulting in possible serious injury.
WARNING :
Do not at any time let brake fluids, gasoline, petroleumbased products, penetrating oils, etc., come in contact with plastic parts. Chemicals can damage, weaken or destroy plastic which can result in serious personal injury