1MORE S30 Fit SE Open Earbuds User Guide
- June 13, 2024
- 1more
Table of Contents
lMORE Fit SE Open Earbuds S30
User Guide
www.1more.com
EF606
S30 Fit SE Open Earbuds
Answer/End call: Double-tap
Decline: Press and hold Voice control on cellphone: Tap 3 times when Bluetooth
is on and not on a phone call.
Play/Pause: Double-tap
- T0 cliange c1 song or control volume, please setup on lt.lORE MUSIC APPor opel”clte on paired mobile phone ordevice,
- Above fuRctions are av.eilable for either earbud in in.cftviduat or .stereo mode. Custom s:etup is avtiil!ble on the A?P.
- Above functions may vary with different devices.
Extra Functions
-
If only one earbud can be connected to the device, please put the two &arbuds back into the case and triple tap the pairing button, then dick “!MORE Fit SE” in the device pairing list to connect to your device.
-
Clear The Pairing Records.
Put both Lek and Right earbuds into the case, press.and hold the pairing button for 8seconds, the pairing records will be cleared. -
OTA Firmware Update:
It can be synchronously upgraded via the. lMORE MUSIC APP while the Left and Rlght Earbuds are connected to each other with at least 50% baruiry.
• Functions of the lMORE MUSIC APP m.ay vary with d·1fferent devices or operating systems. Far more details, pl,eas.econtact our customer service.
1MORE (l) Year Limited Warranty
1MORE warrants to the original retail purchaser that thfs product is to be
free from defective materials and workmanship for a period of one year from
the date of purchase if it is properly used and ma’intained. If this product
proves defective in either material or workmanship, lMORE, at its option, will
(a) repair the product with new or refurbished parts, or (b) replace the
product with an equivalent new or refurbished product, at no charge for parts
or labor. Ir the product model is no longer available and cannot be repaired
effectively or replaced with an identical model. lMORE at its sole option may
replace the unit with a current model of equal or greater value. In some
cases. modification to the mounting surface may be required where a new model
is substituted. lMORE assumes no responsibility or liability for such
modification. TO OBTAIN A REPAIR OR REPLACEMENT UNDER THE TERMS OF THIS
WARRANTY, PLEASE RETURN TD THE ORIGINAL DEALER FIRST AND THE ORIGINAL DEALER
SHALL REPAIR THE PRODUCT WITH NEW OR REFURBISHED PARTS OR REPLACE THE PRODUCT
WITH AN EQUIVALENT NEW DR REFURBISHED PRODUCT. You will be reQuired to submit
a t1roof of purch;,sing details, including but not limited to a receipt or
sales
invoice.
Return shipping for exchanges/repairs is the sole responsibility of the
original retail purchaser
Limitations:
- This limited warranty does not cover the failure of the product resulting from improper installation, misuse, abuse, accident, r,-aglect, mi5handlirig, Or’ wear ftom ordinary use or E!nvironmental deterioration.
- This limited warr1:1nty does nat cover cosmetic damage, including paint d;:,mage, or consequential damage to other components or premises which may result for any reason from the failure of the product.
- This limited warranty is null and void for products not used in accordance with 1MORE’s instructions.
- This limited warranty is null and void for products with altered or missing serial numbers and for products not purchMed frcm an AUTHORIZED dealer’
- This limited warremty terminates if you sell or otherwise transfer this product to another party.
We Appreciate Your Business
We know you will enjoy new 1MORE headphones as much as we do. At 1MORE, we
value your s.atisfaction. If you would like more details on this product or
any of our other products, please visit us online by scanning the QR code. Go
to www.lmore.com and sign up for VIP, and !MORE will treat you like one.
Tips
- Please read this instruction manual carefully and retain for future reference.
- Please fully charge the battery before first use.
- If the headphones have been unused for more than 3 months, we recommend that you charge them. This will improve battery capacity.
- Only use chargers that are FCC (Federal Communications Commissiori) approved.
- In dry environments, static electricity may numb your ear. This is not related ta the quality of the product
Safety Information
- Never disassemble the headphones. There are no user-sentlceable parts Inside.
- Do not expose the headphones to temperatures below 32 .,F (0 c) or temperatures above 113 °’F (45 °C).
- Do not use headphones in a thunderstorm storm. This could prevent the headphones from working pmperly, and also increase your chance of being electrically shocked.
- Do not use oil or any volatile liquid to clean this product.
- Do not listen to high volumes for e-xtended periods.
- Do not use headphones In traffic. Do not use the heaidphones any time It would be dangerous to be unaware of noises around you.
- Adult supervision is required for children of age 6 and under
FCC
This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This device complies with Part 15 of the FCC Rules, Operation is subject to
the following two conditions: (I} this deYice may not cause harmful
interference, and (2} this device must accept any interference received,
including interference that may cause undes.ired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restrict’ron Federal
Communication Commission (FCC) Radiation.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection ag!!linst harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and. if not installed and used in
accordance with the instructions. may cause harmful interference to radio
communications. l-lowever. there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause ham1ful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that t0 which the receiver is ccnnected
- Consult the dealer or an experienced radio/TV technician for help.
FAQ
Why the headphones cannot be turned on?
Checl< if your headphones have enough battery life. If not. please charge them for at least 30 minutes
Why the headphones cannot cannect ttJ my cellphone, or lake a long lime to connect?
Why the headphones cannot play music after successfully connecting to my Android device?
Why there Is no sound from the he&dphones wtille making phone calls after successfully connecting to my Android device?
Why the Bluetaoth connection is not stable and causes some interruptions?
- Try shortening the disrence between your headphones and device. Avoid solid barriers in between. 2) Please keep away from strong interference sources . .such as Wi-Fi and GPAS 3) Please make sure the Bluetooth antenna of your device is not blocked.
Why some c;ontrol functions do not m.atc;h those in the man1.1al while using third party musir;/video player APOi?
Your operating system and the third party music/video player apps may have different settings for the central functions. We ecommend that you use the music/video player apps that your device has originally provided.
• For more detailed product FAQ ,plesevisit the product supportunder www.1more.com
WEEE
All products bearing this symbol are waste electrical and electronic equipment
(WEEE as in directive 2012/19/EU) which should not be mixed with unsorted
household waste. Instead, you should protect human- health and the environment
by handing over your waste equipment to a designated collection point for the
recycling of waste electrical and electronic equipment, appointed by the
government or local authorities. correct disposal and recycling will help
prevent potential negative consequences to the environment and uman health.
Please contact the Installer or local authorities tor more information about
the location ais well as terms and condltlons of such collection points.
Your lMORE retailer will advise you of the correct way of disposal in your
country.
Safety Caution
Do not expose batteries or battery packs to excessive heat such as sunshine.
fire or the like.
Tiinlab Corporation hereby declares that this product is in compliance
with the essential requirements and other relevant provisions of Directive
2014/53/EU and all other applicable EU directive requirements.The full text of
the EU declar,ation of conformity is available at the following internet
address: www.1more.com
Hereby, Tllnlab Corporation declares that the radio equrpment type EF606
Is rn compllance with Radio Equipment Regulations 2017. The full text of the
UKCA declaration ofconformity is available at the following internet address:
www.1more.com
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc.
The Qi logo is a registered trademark of the Wireless Power Consortium.
Warning
Replacement of a battery with an incorrect type that can defeat a safeguard
(such as catching fire, explosion, leakage of corrosive electrolyte etc);
Disposal of a battery into fire or a hot oven, or mechanically crushing or
cutting of a battery. that can result in an explosion; Leaving a battery in an
extremely high temperature surrounding environment that can result ·1n an
explosion or the leakage of flammable liquid or gas; and A battery subjected
to extremely low air pressure that meiy result in an explosion Cf the lei!kage
of flammable liquid or gas.
****The symbol indicates DC voltage.
IC
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditicns: (1) this device may not
cause interferenc<&, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
This Class B digital apparatus complies with Cariadian ICES-003.
Radiation Exposure Statement:
The product comply with the canada portable RF exposure limit set forth for an
uncontrolled environment and are safe for intended operation as described in
this manual. The further RF exposure reduction can be achieved if the product
can be kept as far as possible from the user body or set the device to lower
output power if such function ls avallable.
Name: Wireless Earphones
Model: EF606
Earbud Weight: 10 g
case Weight: 59.7 g
Product Weight: 79.7 s
Earbud Size: 44.92 x 47.11 x 21.97 mm
Case Size: 704.8 x 54.6 x 30.0 mm
Earbud Battery Capacity: BS mAh
Case Battery Capacity: 600 mAh
Earbud Charging Time: 90 mins
Case Charging Time: 120 mins•
Earbud Playtime (Fully Charged): 10 hrs•
Earbud w/ Case Playtime. (Fully Charged): 30 hrs•
Impedance; 16 n
Wireless Range: 10 m
Blu&tooth: BluetoothlJI 5.3
Bluetooth Protocol: HFP / A2DP / AVRCP
Input: 5V=0.5A
Working Temperature:0 ºC – 45 ºC
Frequency Sand:2.402 GHZ-2.480 GHZ
Operltion Frequency/Max. EIRP: 2402-2480MHz, Max EIRP is 0.36dBm.
IC: 24662-EF606 FCC ID: 2ASDl·EF606
The specifications are acquired from laboratory tested data,
- The playback time, tested under the laboratory condition of AAC format and 50% volume, may vary with different device setting, environments, usage and other factors.
1 MORE MUSIC APP
For users outside mainland China, please download the lMORE MUSIC APP for
product upgrades and additional features
- APP UI in user guide may vary and for reference only, please refer to UI on device
Manufacturer: Tiinlab Corporation
Acid: NO 3333, Livxi:;in Avenue-. Tower A, 35th Floor,
Tanglang City, Nanshan District, Shenzhen, China
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>