VOLT VPL-1053 Stemless Brass Bronze Directional Path Light Installation Guide

June 13, 2024
VOLT

VOLT VPL-LOGO

VOLT VPL-1053 Stemless Brass Bronze Directional Path Light

VOLT VPL-1053-Stemless-Brass-Bronze-Directional-Path-Light-
PRODUCT

Product Information

  • Product Name: VPL-1053
  • Intended Use: Luminaire for outdoor installation
  • Power Supply: Transformer with a maximum rating of 300 watts (25 AMPS) at 15 volts
  • Wiring Requirements : UL-listed wire connectors suitable for outdoor use
  • Low Voltage Cable: Intended for shallow burial (less than 6 inches / 152 mm)
  • Package Contents:
    • (1) Fixture Body
    • (1) Mounting Bracket
    • (3) Anchors
    • (3) Screws
    • (1) Coupling
  • Additional Parts Required (Sold Separately):
    • Mounting Accessory
    • (1) G4 Bulb
  • Product Dimensions:
    • Fixture Body: 2.58″ x 1.96″ x 2.71″

Product Usage Instructions

Remove Shade

  1. Remove the screw on the bottom of the fixture body to detach the shade.

Install G4 Bulb

  1. Insert the G4 bulb into the socket properly, ensuring the correct wattage and type marked on the fixture label.
  2. CAUTION: Do not exceed the maximum wattage marked on the luminaire label.

Install the Shade

  1. Place the shade back onto the fixture body.
  2. Secure the shade with the previously removed screw. Hand tighten until snug.

Mounting Option A: Surface Mount

  1. Install Mounting Bracket:
    • Attach the mounting bracket to the desired mounting surface.
    • Use a pencil to mark 3 points on the mounting surface from the 3 holes on the mounting bracket.
    • Drill 1/4″ holes on the marked points on the mounting surface.
    • Insert anchors into the drilled holes completely.
    • Attach the mounting bracket onto the mounting surface and secure it with screws. Hand tighten until snug using screwdrivers.
  2. Install Fixture Body to Mounting Bracket:
    • Lay the supply cable into the wireway slot on the mounting bracket.
    • Align two screw heads on the bottom of the fixture body to the keyholes on the mounting bracket.
    • Push the fixture body onto the mounting bracket and rotate it until it is locked into place.

Mounting Option B: Stake Mount

No specific instructions are provided in the given text extract.
Please refer to the respective installation instructions for Mounting Option B.

INSTALLATION INSTRUCTIONS

  • VOLT® Stemless Brass Bronze Directional Path Light – VPL-1053
  • IMPORTANT: PLEASE READ BEFORE INSTALLATION
  • This luminaire is intended for installation in accordance with local codes and the National Electric Code (NEC). Failure to adhere to these codes and instructions may result in serious injury, and property damage and void the warranty.
  • These instructions do not intend to cover all variations in installation, operation maintenance, or mounting situations.
  1. Make sure that the power is turned OFF before installing or servicing this luminaire.
  2. WARNING: risk of electrical shock. Install all luminaires 10 feet (3.05M) or more from the pool, spa, or fountain.
  3. This luminaire is intended to be used only with a power supply (transformer) rated maximum of 300 watts (25 AMPS) at 15 volts.
  4. Wiring connections must be made with UL-listed wire connectors that are suitable for outdoor use.
  5. Position the low voltage wire and wire connector so that it is located within 6 inches (15.2 cm) from a building structure, a luminaire, or a fitting.
  6. The main low-voltage cable is intended for shallow burial – less than 6 inches (152 mm).

IMPORTANT SAFETY INSTRUCTIONS

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO A PERSON’S LIGHTED LAMP ARE HOT!
WARNING – To reduce the risk of FIRE OR INJURY TO PERSONS.

  1. Turn off/unplug and allow to cool before reducing the lamp.
  2. The lamp gets HOT quickly!
  3. Do not touch the hot lens, guard, or cowl.
  4. Keep lamps away from materials that may burn.
  5. Do not touch the lamp at any time.
  6. Use a soft cloth.
  7. Oil from the skin may damage the lamp.
  8. Do not operate the fixture with a damaged or missing lens or shield.

PACKAGE CONTENTS

  • A. (1) Fixture Body
  • B. (1) Mounting Bracket
  • C. (3) Anchors
  • D. (3) Screws
  • E. (1) Coupling

Parts Required (Sold Separately)

  • A. Mounting Accessory
  • B. (1) G4 Bulb

PRODUCT DIMENSIONS

VOLT VPL-1053-Stemless-Brass-Bronze-Directional-Path-
Light-FIG-1

REMOVE SHADE

  • Remove the shade from the fixture body by removing the screw on the bottom.

INSTALL G4 BULB

  • Insert the G4 bulb into the socket properly with the correct wattage and type marked on the fixture label.
  • CAUTION: Do not exceed the maximum wattage marked on the luminaire label.

INSTALL THE SHADE

  • Install the shade back onto the fixture body and secure it with the previously removed screw. Hand tighten until snug.
  • Two installation methods are available for this product (Mounting Options A & B). Refer to respective installation instructions and then continue to Step 4 for wire connections.

Mounting Option A: Surface Mount

Install Mounting Bracket

  1. Attach the mounting bracket to your desired mounting surface. Use a pencil, and mark 3 points on the mounting surface from 3 holes on the mounting bracket.
  2. Set the mounting bracket aside and drill 1/4” holes on the marks on the mounting surface.
  3. Insert anchors into the drilled holes completely.
  4. Attach the mounting bracket onto the mounting surface and secure it with screws. Hand tighten until snug with screwdrivers.

Install Fixture Body to Mounting BracketVOLT VPL-1053-Stemless-Brass-
Bronze-Directional-Path-Light-FIG-6

  • Lay the supply cable into the wireway slot on the mounting bracket. Align two screw heads on the bottom of the fixture body to the keyholes on the mounting bracket.
  • Push the fixture body onto the mounting bracket and rotate it until it is locked into place
  • Go to Step 4 for wire connections.

Mounting Option B: Stake Mount

Install Stake to Fixture Body

  • Pass supply cables through the coupling and the stake.
  • Thread the coupling and the stake to the fixture body and hand tighten until snug.

Install Stake Into Soil

  • Clear away an area in the ground at the wireway slot. Lay the supply cables into the wireway slot and insert the stake into the soil until the flange of the stake is flush with the ground.
  • Go to Step 4 for wire connections.

WIRE CONNECTIONS

VOLT VPL-1053-Stemless-Brass-Bronze-Directional-Path-
Light-FIG-9

  • Strip both leads from the luminaire pigtail. Using two UL-listed wire connectors (sold separately), connect the leads from the luminaire to the main supply cable leads.

Install/Replace Lamp

  • Remove the fixture body from the mounting bracket or the stake first. Reverse Step 1 – Step 3 to expose the G4 bulb and replace it with the correct wattage and type marked on the fixture label.
  • Then, reinstall the shade and fixture body.
  • IMPORTANT: G4 Bi-pin bulb must be protected from moisture and dust at all times.
  • Always reinstall the shade when removed.
  • 1-813-978-3700
  • Mon-Fri 8 am-8 pm
  • Sat-Sun 10 am – 6 pm (EST)
  • Specifications and product details are subject to change without notice.
  • © Copyright 2023, VOLT® Lighting, Lutz FL USA 33549
  • All rights reserved. customersupport@voltlighting.com
  • www.voltlighting.com

Documents / Resources

| VOLT VPL-1053 Stemless Brass Bronze Directional Path Light [pdf] Installation Guide
VPL-1053, VPL-1053 Stemless Brass Bronze Directional Path Light, Stemless Brass Bronze Directional Path Light, Bronze Directional Path Light, Directional Path Light, Path Light, Light
---|---

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals