VHS-610X-25-BBZ Low Voltage Landscape Lighting Instruction Manual

June 13, 2024
VOLT

VHS-610X-25-BBZ Low Voltage Landscape Lighting

VHS-610X-25-BBZ-Low-Voltage-Landscape-Lighting-product

Product Information

Product: VHS-610X-25-BBZ Luminaire

Product Dimensions:

  • Length: 5.92 inches (15.04 cm)
  • Width: 2.35 inches (5.97 cm)
  • Height: 0.70 inches (1.78 cm)

Package Contents:

  • (1) Luminaire
  • (2) Anchors
  • (2) Screws

Important Safety Instructions:

  • Read and adhere to local codes and the National Electric Code (NEC) for proper installation.
  • Ensure the power is turned OFF before installing or servicing the luminaire.
  • Install the luminaire at least 10 feet (3.05 meters) away from pools, spas, or fountains to prevent electrical shock.
  • Use a power supply (transformer) rated maximum of 300 watts (25 AMPS) at 15 volts.
  • Make wiring connections with UL listed wire connectors suitable for outdoor use.
  • Position the low voltage wire and wire connector within 6 inches (15.2 cm) from a building structure, a luminaire, or fitting.
  • The main low voltage cable is intended for shallow burial, less than 6 inches (152 mm).

Product Usage Instructions

  1. Install Luminaire:
    • For concrete or brick walls, use anchors. Hold the luminaire on the wall and mark two points for the anchors using the mounting holes as guides.
    • Drill proper holes using the marked points and insert the anchors into the drilled holes.
    • Attach the luminaire onto the desired mounting surface and secure with the screws. Hand tighten until snug with a screwdriver.
  2. Wire Connections:
    • Strip both leads from the luminaire pigtail.
    • Using two wire connectors (sold separately), connect the leads from the luminaire to the main supply cable leads.

IMPORTANT: PLEASE READ BEFORE INSTALLATION

This luminaire is intended for installation in accordance with local codes and the National Electric Code (NEC). Failure to adhere to these codes and instruc-tions may result in serious injury, property damage and void the warranty.
These instructions do not intend to cover all variations in installation, opera-tion maintenance or mounting situations.

  1. Make sure that the power is turned OFF before installing or servicing this luminaire.
  2. Warning: risk of electrical shock. Install all luminaires 10 feet (3.05M) or more from pool, spa or fountain.
  3. This luminaire is intended to be used only with a power supply (trans-former) rated maximum of 300 watts (25 AMPS) at 15 volts.
  4. Wiring connections must be made with UL listed wire connectors that are suitable for outdoor use.
  5. Position the low voltage wire and wire connector so that it is located within 6 inches (15.2 cm) from a building structure, a luminaire or fitting.
  6. The main low voltage cable is intended for shallow burial – less than 6 inches (152mm).

IMPORTANT SAFETY INSTRUCTIONS

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PER-SONS
Lighted lamp is HOT!

WARNING – TO REDUCE THE RISK OF FIRE OR INJURY TO PERSONS.

  1. Turn off/unplug and allow to cool before replacing lamp.
  2. Lamp gets HOT quickly! Contact only switch/plug when turning on.
  3. Do not touch the hot lens, guard or enclosure.
  4. Keep lamp away from materials that may burn.
  5. Do not touch lamp at any time. Use a soft cloth. Oil from skin may damage lamp.
  6. Do not operate the luminaire fitting with a missing or damaged shield.

PACKAGE CONTENTS

  • A. (1) Luminaire
  • B. (2) Anchors
  • C. (2) Screws

PRODUCT DIMENSIONS

VHS-610X-25-BBZ-Low-Voltage-Landscape-Lighting-fig-1

INSTALLATION INSTRUCTIONS

Install Luminaire

Note: Anchors are required for concrete or brick walls. Hold the luminaire on the wall and mark two points for the anchors using the mounting holes as guides. Then drill the proper holes using the marks. Insert the anchors into the drilled holes.
Attach the luminaire onto the desired mounting sur-face and secure with the screws. Hand tighten until snug with a screwdriver.

Wire Connections

VHS-610X-25-BBZ-Low-Voltage-Landscape-Lighting-fig-3

Strip both leads from the luminaire pigtail. Using two wire connectors (sold separately), connect the leads from the luminaire to the main supply cable leads.

1-813-978-3700 • Mon-Fri 8am-8pm • Sat- Sun 10am – 6pm (EST)
Specifications and product details subject to change without notice.
© Copyright 2023, VOLT® Lighting, Lutz FL USA 33549 • All rights reserved. customersupport@voltlighting.comwww.voltlighting.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals