ELECOM M-IT10DR Wireless Trackball Mouse User Manual

: June 13, 2024
: ELECOM

Table of Contents

M-IT10DR Wireless Trackball Mouse
Product Information:
Precautions:
Product Usage Instructions:
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

M-IT10DR Wireless Trackball Mouse

Product Information:

Product Name: CR50815 Wireless Trackball Mouse

Model: M-IT10DR/E01D

Precautions:

Meaning of symbols:
- WARNING: Failure to observe precautions
  carries the possibility of serious personal injury or death due to
  fire, electric shock, or other causes.
- CAUTION: Failure to observe precautions may
  result in personal injury due to electric shock or other causes,
  and may damage other equipment.
Prohibited action:
- If a foreign object (water, metal chips) enters the product,
  immediately stop using the product, remove the receiver unit from
  the PC, and remove the batteries from the trackball. Continuing to
  use the product as it is may cause a fire or electric shock.
- If the product is behaving abnormally, such as by generating
  heat, smoke, or giving off a strange smell, immediately stop using
  the product, shut down the PC, and then after sufficiently checking
  for whether the product is generating heat without being burned,
  remove the receiver unit from the PC, and remove the batteries from
  the trackball. Afterwards, please contact your dealer. Continuing
  to use the product as it is may cause a fire or electric
  shock.
- Please do not drop or hit this product. In the unlikely event
  that this product is damaged, immediately stop using the product,
  remove the receiver unit from the PC, and remove the batteries from
  the trackball. Afterwards, please contact your dealer. Fires or
  electric shocks may occur if this product is used when
  damaged.
- Do not attempt to disassemble, modify or repair this product.
  Doing so may cause a fire, electric shock, or product damage.
  Malfunctions are not covered under warranty.
- Do not put this product in fire. Ruptures may cause fire or
  injury.
Mandatory action:
- Do not place this product in any of the following environments:
  In a car exposed to sunlight or a place exposed to direct sunlight.
  In a place that becomes hot, such as around a heater. In a moist
  place or a place where condensation may occur. In an uneven place
  or a place exposed to vibration. In a place where a magnetic field
  is generated (such as near a magnet.) In a dusty place.
- This product does not have a waterproof structure. Use or store
  in a place not exposed to liquids such as water. Any liquid such as
  rain, water spray, juice, coffee, steam, and sweat, may cause this
  product to breakdown.
- Only use this trackball with PCs, smartphones, tablets, and
  video game systems. Do not use this product with any device that
  may significantly be affected in the case of this product
  malfunctioning.
- When you no longer need to use this product and the battery, be
  sure to dispose of them in accordance with the local ordinances and
  laws of your area.
Battery:
- Please use either an AA alkaline battery, an AA manganese
  battery or an AA nickel-metal hydride rechargeable battery.

Product Usage Instructions:

Ensure that the trackball mouse is compatible with your device
(PCs, smartphones, tablets, and video game systems).
Open the battery compartment of the trackball mouse.
Insert a compatible AA battery (alkaline, manganese, or
nickel-metal hydride) into the battery compartment.
Close the battery compartment securely.
Connect the receiver unit to your device’s USB port.
Turn on your device.
The trackball mouse should now be ready for use.
Ensure that you follow the precautions mentioned in the user
manual to avoid personal injury, damage, fire, and other
problems.
If you encounter any abnormalities such as heat generation,
smoke, or strange smell from the trackball mouse, immediately stop
using it, shut down your device, remove the receiver unit, and
remove the batteries from the trackball. Contact your dealer for
assistance.
Dispose of the product and batteries in accordance with local
ordinances and laws when no longer needed.

CR50815
Wireless Trackball Mouse User Manual
M-IT10DR/E01D
Thank you very much for purchasing this product. * “M-IT10DR” series is referred to as “this product” in this manual except in some cases.
Precautions
This manual describes the important precautions you should take for safe operation of this product. Observe these precautions carefully to avoid personal injury, damage, fire, and other problems.
Meaning of symbols
WARNING
Failure to observe precautions carries the possibility of serious personal injury or death due to fire, electric shock, or other causes.
CAUTION

Failure to observe precautions may result in personal injury due to electric shock or other causes, and may damage other equipment.
Prohibited action Mandatory action Situation that needs attention Notes and reference information
WARNING
If a foreign object (water, metal chips) enters the product, immediately stop using the product, remove the receiver unit from the PC, and remove the batteries from the trackball. Continuing to use the product as it is may cause a fire or electric shock.
If the product is behaving abnormally, such as by generating heat, smoke, or giving off a strange smell, immediately stop using the product, shut down the PC, and then after sufficiently checking for whether the product is generating heat without being burned, remove the receiver unit from the PC, and remove the batteries from the trackball. Afterwards, please contact your dealer. Continuing to use the product as it is may cause a fire or electric shock.
Please do not drop or hit this product. In the unlikely event that this product is damaged, immediately stop using the product, remove the receiver unit from the PC, and remove the batteries from the trackball. Afterwards, please contact your dealer. Fires or electric shocks may occur if this product is used when damaged.
Do not attempt to disassemble, modify or repair this product. Doing so may cause a fire, electric shock, or product damage. Malfunctions are not covered under warranty.
Do not put this product in fire. Ruptures may cause fire or injury.
CAUTION
Do not place this product in any of the following environments: In a car exposed to sunlight or a place exposed to direct sunlight. In a place that becomes hot, such as around a heater.

In a moist place or a place where condensation may occur. In an uneven place or a place exposed to vibration. In a place where a magnetic field is generated (such as near a magnet.) In a dusty place.
This product does not have a waterproof structure. Use or store in a place not exposed to liquids such as water. Any liquid such as rain, water spray, juice, coffee, steam, and sweat, may cause this product to breakdown.
Only use this trackball with PCs, smartphones, tablets, and video game systems. Do not use this product with any device that may significantly be affected in the case of this product malfunctioning. When you no longer need to use this product and the battery, be sure to dispose of them in accordance with the local ordinances and laws of your area.

Battery

CAUTION

Please use either an AA alkaline battery, an AA manganese battery or an AA nickel-metal hydride rechargeable battery.
Remove the battery when you are not using this product for long periods of time. Otherwise, this may cause leakage or malfunction.

Cleaning the Product
If the body of this product becomes dirty, wipe it with a soft, dry cloth.
Using a volatile liquid such as paint thinner, benzene or alcohol may affect the material quality and/or discolor this product.
Please note the following for disinfection.
Gently soak a cleaning cloth, such as a microfiber cloth, in the disinfectant solution. Make sure there are no loose droplets and gently wipe the product using the cloth. After wiping, dry thoroughly and wipe off any residual liquid. * Do not spray any liquid onto the product directly. Doing so can cause electric malfunctions.

IMPORTANT

Do not spray any liquid onto the product directly. Doing so can cause electric malfunctions.
Do not use organic solvents or ultraviolet lights. Usage can result in deterioration of the housing components or paints, which can cause damage to the exterior.
We recommend the usage of disposable gloves.
Please unplug the USB connector from the PC.
When using any alcohol-based products, please check that it is appropriate for the specific purpose and that it is used properly.
Please note that in the event that damage or abnormal operation to the product is caused by the cleaning process, the customer will be fully responsible for the cost of repair.
We recommend that you disinfect your hands before and after using PCs and peripheral devices that are used by multiple people in order to prevent the spread of infection through the equipment.
Please turn off any connected devices. Please turn off connected devices when in sleep or hibernation mode. Please unplug the AC adapter and power cable from the power outlet.
Cautions for Wireless Equipment
This product is a wireless device that can use the entire 2.4 GHz band, and is able to avoid the mobile entity identification device range. The GFSK method is adopted as the radio wave method, and the interference distance is 10 m. The 2.4 GHz band is also used in medical devices, Bluetooth, and wireless LAN devices of the IEEE 802.11b/11g/11n standards. Before using this product, check that there are no other “radio stations” operating nearby. If electromagnetic interference occurs between this product and other “radio stations”, move this product to another location or stop using this product.

Other “radio stations” refer to industrial, scientific and medical devices using the 2.4 GHz band, the same as this product, other radio stations of this type, licensed radio station premises for a mobile object identification system that is used in factory production lines, certain non-licensed low power radio stations, and amateur radio stations.
WARNING

Do not use in equipment which may cause serious effects due to it malfunctioning. There are rare cases in which an external radio wave at the same frequency, or the radio wave emitted from a mobile phone, causes this product to malfunction, slow down, or fail to operate. Do not use this product in places where radio wave usage is prohibited, such as hospitals. Radio waves of this product may affect electronic devices and medical devices (for example pacemakers). Due to the possibility of hindering safe navigation of aircraft, use of wireless trackball in aircraft is prohibited by the Civil Aeronautics Act. Turn off the power of the wireless trackball before boarding and do not use after boarding. * ELECOM is not liable for any accidents or any indirect or consequential damage incurred due to the failure of this product.
How to use
Items included in this package
The following are included in this package. Verify the package to ensure all items are accounted for prior to using this product. Every effort has been made to ensure proper packaging. However, in the event that any part is missing or damaged, please contact the retailer where this product was purchased. Trackball × 1 Receiver unit x 1
Pre-inserted into the trackball. Please remove before use.
AA alkaline dry cell battery for confirming operability × 1
Pre-inserted into the trackball. Please remove the battery insulating pull tab before use.
Support part removal tool × 1
Name and function of each part
Trackball

Left button To left click on your PC.
Right button To right click on your PC.
Wheel Rotate forward and backward or click like a button to operate your PC.
“Back” button Performs the “Back” function on the Web browser.
“Forward” button Performs the “Forward” function on the Web browser.

”Forward” button
Continue to next page.

”Back” button
Return to previous page.

You will need to install the “ELECOM Mouse Assistant Mac version” from our website to use the “Back” and “Forward” button on Mac. Refer to “Install ELECOM Mouse Assistant”.
LED light The base of the wheel illuminates in red for a few seconds when the power is turned on. The light around the mouse will start to blink red when the battery level is low.
Power switch Turn the trackball power ON and OFF. Ball (36mm) Rotate using your fingertips to move the cursor.
Separately sold ball Replacement 36 mm ball (M-B10SV)
Support parts (synthetic ruby) Support the ball. Support parts are consumables. Compatible support parts can be purchased separately to replace existing support parts.
Optional Parts Replacement synthetic ruby unit (M-RS10) Replacement bearing unit (M-BS10)
Optical sensor (under the ball) This sensor will detect the trackball’s movements when you move the trackball. Ball removal hole Remove the ball from here to clean the support parts in the housing. * See “How to clean the trackball” for details. Receiver unit storage compartment The receiver unit can be stored here when the mouse is not in use.

Battery cover Remove this cover and insert the battery. Battery storage compartment Holds the battery. Battery insulating tab Remove this tab before using.
Receiver unit
USB connector Connects to the PC USB-A port
Support part removal tool

See “How to replace support parts” for details.
Connecting and Configuring the Trackball

Windows®
1. Turn the power ON

Remove the battery cover.
Remove the battery insulating tab.
Put the battery cover back on.
Remove the receiver unit.
Slide the power switch to the ON position.
The light around the wheel lights up red for 3 seconds. When the battery level is running low, the LED light will blink slowly for a period of time.
Power-saving mode When the trackball is left untouched for a fixed period of time while the power is ON, it automatically shifts to power-saving mode. Moving the trackball restores it from energy saving mode. For two to three seconds after restoring from energy saving mode, trackball operation may be unstable. Replacing the battery… 1) Remove the battery cover.
Remove the battery.
Insert the battery according to the instructions on the battery compartment.
Ensure that the battery is inserted with the positive (+) and negative (-) terminals oriented correctly. 4) Put the battery cover back on.
2. Connect to a PC
Start up your PC. Please wait until your PC has started up and can be operated. 2) Insert the receiver unit into the PC’s USB-A port.

USB-A port
You may use any USB-A port. Ensure that the connector is correctly oriented to the port. If there is strong resistance when inserting, check the shape and orientation of the connector. Forcibly inserting the connector may damage the connector, and there is a risk of injury. Do not touch the terminal portion of the USB connector.
When removing the receiver unit This product supports hot plugging. The receiver unit can be removed while the PC is on. 3) The driver is automatically installed and the trackball can be used. You can now use the trackball. By downloading and installing the “ELECOM Mouse Assistant” from our company website, functions such as button assignment function and presentation mode can be used. Please proceed to “Install ELECOM Mouse Assistant”.
Change the mouse pointer speed
Adjust the mouse pointer movement speed on your PC if the mouse pointer moves too fast or too slow. For Windows 11 1) Click on “Start” on the bottom of the screen and click on “Settings”. The “Settings” page will appear.
2) Click on “Bluetooth & devices” and then “Mouse”.

The screenshots will be replaced with the English version when it’s ready

Adjust the “Mouse pointer speed” slider bar to adjust the mouse pointer movement speed.
For Windows 10 1) Open “Mouse” properties. From the start menu, click the Settings icon, select “Devices” “Mouse”, then click “Additional mouse options” under “Related Settings”. 2) Select the “Pointer Options” tab. 3) Adjust the “Select a pointer speed” slider bar to adjust the mouse pointer movement
speed.

The screenshots will be replaced with the English version when it’s ready
Change the number of lines scrolled in one wheel turn
For Windows 11 1) Click on “Start” on the bottom of the screen and click on “Settings”. The “Settings” page will appear. 2) Click on “Bluetooth & devices” and then “Mouse”.

Adjust the “Lines to scroll at a time” slider bar to adjust the number of lines per scroll.

The screenshots will be replaced with the English version when it’s ready
For Windows 10 1) Open “Mouse” properties. From the start menu, click the Settings icon, select “Devices” “Mouse”, then click “Additional mouse options” under “Related Settings”. 2) Select the “Wheel” tab. 3) Change the value of “The following number of lines at a time” under “Roll the wheel one
notch to scroll”

Mac
1. Turn the power ON

Remove the battery cover.
Remove the battery insulating tab.
Put the battery cover back on.
Remove the receiver unit.
Slide the power switch to the ON position.
The light around the wheel lights up red for 3 seconds. When the battery level is running low, the LED light will blink slowly for a period of time.
Power-saving mode When the trackball is left untouched for a fixed period of time while the power is ON, it automatically shifts to power-saving mode. Moving the trackball restores it from energy saving mode. For two to three seconds after restoring from energy saving mode, trackball operation may be unstable. Replacing the battery… 1) Remove the battery cover.
Remove the battery.
Insert the battery according to the instructions on the battery compartment.
Ensure that the battery is inserted with the positive (+) and negative (-) terminals oriented correctly. 4) Put the battery cover back on.
2. Connect to a PC
Start up your PC. Please wait until your PC has started up and can be operated. 2) Insert the receiver unit into the PC’s USB-A port.

USB-A port
You may use any USB-A port. For terminals that do not have a USB-A port, such as a MacBook, use the USB Type-C® hub.
USB Type-C® hub
Ensure that the connector is correctly oriented to the port. If there is strong resistance when inserting, check the shape and orientation of the connector. Forcibly inserting the connector may damage the connector, and there is a risk of injury. Do not touch the terminal portion of the USB connector. When removing the receiver unit This product supports hot plugging. The receiver unit can be removed while the PC is on.
3) The driver is automatically installed and the trackball can be used. You can now use the trackball.
By downloading and installing the “ELECOM Mouse Assistant” from our company website, functions such as button assignment function and presentation mode can be used. Please proceed to “Install ELECOM Mouse Assistant”.

The screenshots will be replaced with the English version when it’s ready
Change the mouse pointer speed
Adjust the mouse pointer movement speed on your PC if the mouse pointer moves too fast or too slow. 1) Click “Mouse” under “System Settings”. The “Mouse” settings page will load up.

Adjust the “Tracking speed” slider to adjust the speed of the mouse pointer.
Unchecking “Natural scrolling” will cause the scroll direction to be reversed.

ChromeOS
1. Turn the power ON

Remove the battery cover.
Remove the battery insulating tab.
Put the battery cover back on.
Remove the receiver unit.
Slide the power switch to the ON position.
The light around the wheel lights up red for 3 seconds. When the battery level is running low, the LED light will blink slowly for a period of time.
Power-saving mode When the trackball is left untouched for a fixed period of time while the power is ON, it automatically shifts to power-saving mode. Moving the trackball restores it from energy saving mode. For two to three seconds after restoring from energy saving mode, trackball operation may be unstable. Replacing the battery… 1) Remove the battery cover.
Remove the battery.
Insert the battery according to the instructions on the battery compartment.
Ensure that the battery is inserted with the positive (+) and negative (-) terminals oriented correctly. 4) Put the battery cover back on.
2. Connect to a PC
Start up your PC. Please wait until your PC has started up and can be operated. 2) Insert the receiver unit into the PC’s USB-A port.

USB-A port
You may use any USB-A port. For devices that do not have a USB-A port, please use a USB Type-C hub.
USB Type-C® hub
Ensure that the connector is correctly oriented to the port. If there is strong resistance when inserting, check the shape and orientation of the connector. Forcibly inserting the connector may damage the connector, and there is a risk of injury. Do not touch the terminal portion of the USB connector. When removing the receiver unit This product supports hot plugging. The receiver unit can be removed while the PC is on.
3) The driver is automatically installed and the trackball can be used. You can now use the trackball.
Change the mouse pointer speed
Adjust the mouse pointer movement speed on your PC if the mouse pointer moves too fast or too slow. 1) Click on the quick settings panel on the bottom right.

The screenshots will be replaced with the English version when it’s ready 2) Click on “Settings”. The settings page will appear.

Click on “Mouse and touchpad” under “Device”.
Adjust the “Mouse speed” slider to adjust the speed of the mouse pointer.

The screenshots will be replaced with the English version when it’s ready
XXX will be determined when it’s fixed.
Product specifications

Connector type Connection method Compatible models Supported OS
Communication method Radio frequency Radio wave range Sensor Resolution Sensor type

USB Type-A plug
USB 2.4 GHz Wireless
USB port-equipped Windows OS, macOS, and ChromeOS devices
Windows 11/10, macOS Ventura 13 and ChromeOS Update for each new version of the OS or the installation of a service pack might be required. Compatibility information was retrieved during operation confirmation in our verification environment. There is no guarantee of full compatibility with all devices, OS versions and applications.
GFSK
2.4 GHz
Maximum distance approximately 10 m *May vary depending on the environment.
500 DPI
IR LED

XXX will be determined when it’s fixed.

Light beam type

Infra-red light

Buttons

5 * including wheel button

Number of wheels

1

Power source

Any 1 of AA alkaline battery, AA manganese battery or AA nickelmetal hydride rechargeable battery

Battery life

Maximum duration approximately XX months (estimated operating time when using alkaline batteries) * May vary depending on the usage conditions.

Size category

XL size

External dimensions (main unit)

Approximately width 96 mm × length 126 mm × height 52 mm / width 3.8 in. × length 5.0 in. × height 2.0 in.

External dimensions (receiver)

Approximately width 19 mm × length 14.5 mm × height 6.3 mm / width 0.75 in. × length 0.57 in. × height 0.25 in.

Weight (main unit)

Approximately XX g / X.X oz *excluding battery

Mass (receiver unit)

Approximately 2 g / 0.07 oz

Operating environment conditions

Temperature: 5 to 40 / 41 to 104 , humidity: 90 % RH (without condensation)

Storage environment conditions

Temperature: -10 to 60 / 14 to 140 , humidity: 90 % RH (without condensation)

Accessories

Support part removal tool × 1

Environmental Considerations

EU RoHS compliant (10 substances), environmentally friendly package

Compliance status
Model////: M-IT10DR, E01D www.elecom.co.jp/global/certification/

XXX will be determined when it’s fixed.
China /
RoHS Compliance () https://www.elecom.co.jp/global/certification/pdf/RoHS_China.pdf
EU
CE Declaration of Conformity https://www.elecom.co.jp/global/certification/pdf/CE_DoC.pdf RoHS Compliance https://www.elecom.co.jp/global/certification/pdf/RoHS_EU_UK_Vietnam.pdf CE Authorised representative: Amazon Services Europe S.à r.l 38 avenue John F. Kennedy, L-1855 Luxembourg
WEEE Disposal and Recycling Information This symbol means that waste of electrical and electronic equipment (WEEE) should not be disposed as general household waste.WEEE should be treated separately to prevent possible harm to the environment or human health.Consult your retailer or local municipal office for collection, return, recycle or reuse of WEEE. FR: INFORMATION DES CONSOMMATEURS SUR LA RÈGLE DE TRI https://www.elecom.co.jp/global/certification/pdf/FR-Info-Tri.pdf
Korea /
: R-R-ELJ-M-IT10DR
XXX will be determined when it’s fixed.
: R-R-ELJ-E01D .
Singapore
Operating Frequencies: XXXX-XXXX MHz Maximum field intensity / RF Output power: X.XX dBm / X.XX mW
Taiwan /
BSMI RoHS Compliance () https://www.elecom.co.jp/global/certification/pdf/RoHS_Taiwan.pdf
M-IT10DR: XXXXXXXXXXXXXX E01D: XXXXXXXXXXXXXX
UK

UK Declaration of Comformity https://www.elecom.co.jp/global/certification/pdf/UK_DoC.pdf
RoHS Compliance https://www.elecom.co.jp/global/certification/pdf/RoHS_EU_UK_Vietnam.pdf
WEEE Disposal and Recycling Information This symbol means that waste of electrical and electronic equipment (WEEE) should not be disposed as general household waste.WEEE should be treated separately to prevent possible harm to the environment or human health.Consult your retailer or local municipal office for collection, return, recycle or reuse of WEEE.
US
FCC ID: YWO-M-IT10DR FCC ID: YWO-E01D This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE; This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by tuning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna – Increase the separation between the equipment and receiver – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected – Consult the dealer or an experienced radio/TV technician for help

NOTICE: The manufacture is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. Such modifications could void the user’s authority to operate the equipment.
In order to make improvements to this product, the design and specifications are subject to change without prior notice.
FCC Caution: To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. (Example – use only shielded interface cables when connecting to computer or peripheral devices).
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0.5 cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The antennas used for this transmitter must be installed to provide a separation distance of at least 0.5 cm from all persons and must not be co- located or operating in conjunction with any other antenna or transmitter.
Responsible party ELECOM USA, Inc. 4041 MacArthur Blvd Suite 400, Newport Beach, CA 92660 USA elecomusa.com
Vietnam / Vit Nam
RoHS Compliance (Chng Nhn t Tiêu Chun RoHS) https://www.elecom.co.jp/global/certification/pdf/RoHS_EU_UK_Vietnam.pdf