ACE TM 250 Truck Crane Instruction Manual
- June 13, 2024
- ACE
Table of Contents
ACE TM 250 Truck Crane Instruction Manual
Lifting dimensions
Dimensions
| Jib Position | Deduction |
|---|---|
| X | Meter |
| 1 | 6.65 |
| 2 | 3.38 |
| 3 | 4.46 |
| 4 | 1.30 |
| 5 | 3.22 |
| 6 | 4.20 |
| 7 | 3.18 |
| 8 | 2.90 |
Crane Chassis| Torsion proof chassis fabricated from high tensile steel
plates. Outrigger boxes are integrated with the chassis. Drive is 6×4 (4 wheel
drive and 2 wheel steer). Full width driver cabin is provided with driver and
codriver seating arrangements
---|---
Engine| Six cylinder Water cooled diesel engine developing 180 bhp@ 2400 rpm
Clutch| Dry, Single Plate (380mm), hydraulically actuated diaphragm type
Transmission Top Speed Brakes| Six Speed Synchromesh Gear box.
60 Kmph.
Air pressurized, diaphragm operated with dual Line arrangement. Flick Valves
operated pneumatic hand brake on rear wheels only.
Tyres Size| 10.00 X 20-16 PLY Rating (10+1)
Outriggers| Four hydraullically operated outriggers with vertical hydraulic
jacks fiited with lock valves. Outrigger blocks are removable & stowable. One
vertical jack also provide beneath driver cabin.
Hydraulic System| Gear type hydraulic pump driven by Transmission PTO.
Super Structure| Fabricated with high tensile steel plates and is capable of
unlimited slewing in either direction. Super structure is mounted on a sealed,
internal teeth slewing ring.
Boom Derricking| Double acting hydraulic cylinder wnllh counter balance safety
valve
Slewing| Piston type hydraulic motor drives a pinion through reduction gear
unit. Double counter balance valve is provided for smooth control and
operations
Telescopic Boom| Double acting hydraulic cylinder is provided for boom
telescoping. Four part boom is fabricated from high tensile steel and is
extendable from 10 mtrs to 31 mtrs
Hoist System| Hoist winch is provided with piston type hydraulic motor driving
grooved hoist barrel via reduction gear unit. The system is fitted with
counter balance valve to control the speed of lowering
Hook Block| 4 sheaves block is provided
Hoist Rope| 16 mm Diameter
Capacities Hydraulic Tank| 400 ltrs.
Fuel Tank| 335 lirs.
Operator’s Cabin (Crane)| Cabin with maximum all round vision is fitted with
lockable door. Al controls for crane motions & electrical controls are
provided in the cabin. Cabin light & fan is also fitted.
Safety Equipment| Safe load indicator which provides radius & hook indication
with visual indication of approach to overload & audible indication of
overload condition. « Over load and over hoist cut off. « Pressure relief in
main circuit. « Pilot operated check valve provided in all the cylinders.
Performance Data
- Derrick Angle: -2° to 80°
- Derricking time: 50-60 secs
- Telescoping time: 80-90 secs
- Slew: 0-2 RPM
- Hoist Main: Single line speed 90 m/min
- Outriggers
- Out: 12 secs
- in: 10 secs
- Down:17 secs
- Up: 12 secs
Axle Loads
- Front Axle: 6800 kgs
- Rear Axle: 20900 kgs
- Total weight : 27700 kgs
Optional Equipment
Side folding lattice Jib – 8 mtrs.
| Radius | 360° BLOCKED |
|---|---|
| Jib Closed 10.0 M | jib Extended 10.0-14.2M |
| 14.2-18.4M** | Jib Extended |
| 18.4-22.6M | Jib Extended |
| 22.6-26.8M | jib Extended |
26.8-31.0M
Meter| | Kgs.| | Kgs.| | | Kgs.| | Kgs.| | | Kgs.| | Kgs.
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---
3.0| | 25000| | 15000| | 13500| | | | | | |
3.5| | *00| | 15000| | 13500| | | | | | |
4.0| | 20000| | 15000| | 13500| | 10500| | | |
4.5| | 17000| | 14000| | 13000| | 10500| | | |
5.0| | 16000| | I 4000| | 13000| | 10000| 6000|
5.5| | 14000| | 13000| | 12500| | 10000| 8000|
6.0| | 12200| | 12000| | 12000| | 9500| 7500| 6000
6.5| | 11000| | 11200| | 11000| | 9000| 7500| 6000
7.0| | 9000| | 10000I| | 10000| | 9000| 7200| 6000
8.0| | 7400| | 8000| | 8200| | 7500| 6900| 5600
9.0| | | | 6500| 6200| | 6500I| | 6200| 5200
10.0| | | | 5100| 5200| | 5300| 5000| 4700
11.0| | | | 4200| 4200| | 4200| 4200| | 4200
12.0| | | | 3500| 3500| | 3300| 3300| | 3300
14.0| | | | 2500| 2500| | 2500| 2400| 2200
16.0| | | | | | | | | 1900| 1800| 1600
18.0| | | | | | | | | 1360| | 1360| 1250
20.0| | | | | | | | | | | | 1000| 1000
22.0| | | | | | | | | | | | | | 650
Boom Elevation| Main Boom a Jib (3Im • 8m)
---|---
80′| 3000
78′| 26030
76′| 2700
70′| 2600
77′| 2500
70′| 2300
68′| 1900
66′| 1550
60′| 1250
87′| 950
80′| 750
58′| 550
56″| 400
RELIABLE AND DEPENDABLE EFFICIENCY
NETWORK
Toll Free Help Line: 1800 1800
004
www.ace-cranes.com
MARKETING H.Q
4th Floor, Pinnacle
Surajkund, NCR-121009
Ph.: +91-129-4550000
Fax: +91-129-4550022
E-mail: marketing@ace-cranes.com
REGISTERED OFFICE
Dudhola Link Road, Dudhola
Palwal-121102, Haryana
Ph.: +91-1275-280111
Fax: +91-1275-280133
CIN L74899HR1995PLC053860
MUMBAI OFFICE
31, “Kalpataru Court”
Chembur, Mumbai – 400074
Ph.: +91-22-25206846, 25207070
Fax: +91-22-25207071
E-mail: acemumbai@ace-cranes.com
KOLKATA OFFICE
“Forma Towers” 84-A, Second Floor
AJC Bose Road, Kolkata – 700014
Ph.: +91-9038070630
E-mail: acekolkata@ace-cranes.com
CHENNAI OFFICE
1st Floor, “Alsa Regency”, 165
Eldams Road, Alwar Pet
Chennai-600018
Ph.: +91-44-24314253
Fax: +91-44-24314252
E-mail: acechennai@ace-cranes.com
HERE TO SERVE YOU.
‘SPARE PARTS & SERVICE
ACE has all India Sales and Service network operating out of all the major
cities. These outlets are fully equipped to provide genuine spare parts and
services by company trained engineers. These outlets are further supported by
company officials based at Delhi, Mumbai, Chennai, Kolkatta, Ahmedabad, Surat,
Pune, Jaipur, Chandigarh, Ranchi, Raipur, Indore, Bhubneshwar, Lucknow,
Jamnagar, Hyderabad, Bangalore, Guwahati, Patna, Vizag & Kochi.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>