Hansshow Y Smart Electric Sunshade User Guide
- June 13, 2024
- Hansshow
Table of Contents
Hansshow Y Smart Electric Sunshade
Product Information
The smart electric sunroof shade is a product designed to provide shade and
cooling for your car’s sunroof. It features a high-grade shade cloth that
offers sun protection and insulation,
allowing you to enjoy air conditioning level cooling during hot summer days.
The installation of this product is non-destructive and does not damage any
original car parts.
Product Features:
- Non-destructive installation, no damage to the original car parts
- Sunshade solarization for car protection
- 5-layer composite heat insulation shade cloth
- One-click electric expansion for easy opening and closing
- Shading and cooling to avoid sunlight and heat insulation
Installation Precautions:
- Ensure the main power in the vehicle is turned off before installation to prevent failure code
- Read the instructions carefully for faster installation
- Do not disassemble any parts by yourself as it may void the warranty
- Watch the installation video and instructions before installing the product
- Check the installed product’s function for normal operation
Product Usage Instructions
- Turn off the main power in the vehicle settings.
- Press the rear-seat button from the trunk.
- Use a plastic trim removal tool to take off the left trim of the trunk.
- Find the plug of the original car cigarette lighter after removing the trim.
- Connect our product’s wiring harness to the cigarette lighter plug.
- Take off the upper left panel.
- Move the harness to the top.
- Use a threading wire to go from the back to the back window.
- Position the glass on the top of the back window.
- Tie the power plug to the back of the threading wire using tape.
- Pull down the upper glass in the back window and untie the tape.
- Lift the shade into the car (it is recommended to have two people for this step).
- Connect the plug on the motor into the power plug that passes through the front (hide the plug in the roof).
- Insert the pin behind the shade curtain into the rear trim board (hold it after inserting).
If you have any questions or need assistance, please contact our customer service:
- Phone: +1949826-6619, +86 130 4421 9654
- Email: support@hansshow.com
Parts List
parts diagram
| | |
---|---|---|---
①| Smart electric sunroof shade| ⑤| Phillips screwdriver
②| Cigarette lighter switch cable| ⑥|
③| Latch and screw| ⑦|
④| Covering cloth| ⑧|
-
Tools required for installation
Plastic trim removal, Phillips screwdriver, threading tape -
Installation precautions
Caution: Please ensure the power off operation, to prevent failure code.
Tips: For faster installation, be sure to read the instructions carefully
Disclaimer and Notes
Warnings and Disclaimers
Important notice: Welcome to purchase the company’s products, in order to
protect the legitimate rights and interests of users, in this special reminder
to users, please be sure to carefully read and fully understand the terms of
this statement before using this product. If you use this product, your use of
the behavior will be regarded as the acceptance of the entire content of this
statement, and agree to accept the following terms of this statement, and bear
the effect caused by irregular use. Hansshow Company reserves the right to
update the above documents. Please be sure to follow the instructions to
operate this product.
Notes
1. Check whether the product list is complete and damaged before
installation.
2. The installation instructions may be slightly different from the actual
operation. If there is any difference, please refer to the actual situation or
contact us.
3, Warning: do not disassemble any parts by yourself, any improper operation
is not covered by the warranty.
4, Install the product first watch the installation video and instructions.
5, check whether the installed product function is normal, if there is a
problem, please check whether the plug is inserted tightly.
Customer Service:
- phone : +1（949）826-6619 +86 130 4421 9654
- Email: support@hansshow.com
Smart electric sunshade-Product selling point
- Electric motor contraction
- Lossless installation
- Open and Close with one click
- Shade and cool down
- Original color
- Sun protection and insulation
- High grade shade cloth
- Silence without stuttering
- Year: 21+Model Y
- Name: Model Y intelligent electric sunroof shade
- LHD and RHD: Not distinguish Processor: Does not distinguish Inetl/AMD
Product Features
- Installation: special car, original car mold, non-destructive installation, no damage to the original car parts
- Experience: hot summer, sunshade solarization to protect the car, summer is to enjoy air conditioning level cooling
- Process: the use of car level 5 layer composite heat insulation shade cloth, original color
- Function: a key to open and close electric expansion, shading and cooling, avoid sunlight and heat insulation
Product description :
- Special car, the original car opening mold and the original roof seamless combination of 100% cover no light leakage, one installation, convenient and fast, no installation experience, can achieve 15-20 minutes of rapid and non-destructive installation, will not damage the interior of the original car.
- Hot summer, all day long, shade to protect the car, summer is to enjoy air-conditioning level cooling sun protection is urgent, no deformation no noise.
- The use of car gauge level 5 layers of composite heat insulation sunshade cloth, the original color, into the car color is more beautiful, more harmonious, shading heat insulation without odor, comprehensive upgrade, simple and beautiful, to avoid high temperature exposure in the car, heat insulation and cooling.
- Intelligent electric free retractable, minimalist design, shading straight down temperature (cover and not cover at a glance), easy adjustment with one hand, want to cover where to cover where in one step, with the press, silent, anti-thermal insulation, full coverage of anti-light zero, fear of fierce summer.
Installation Instruction
- Installation tools: Plastic trim removal board, Phillips screwdriver, and Threading wire
- Turn off the main power in the vehicle setting
- Press the rear-seat button from the trunk
- Use plastic trim removal take off the left trim of the trunk
- After remove the trim, find the plug of the original car cigarette lighter
- Connect with our products wiring harness
- Take off the upper left panel
- Move the harness to the top
- Use the threading wire from the back to the back window
- Glass position on the top of the back window
- Use tape to tie the power plug to the back of the threading wire
- Pull down the upper glass in the back window and untie the tape
- Lift the shade into the car (two people are recommended to operate)
- Connect the plug on the motor into the power plug that passes through the front (hide the plug in the roof).
- Insert the pin behind the shade curtain into the rear trim board (hold it after inserting)
- Insert these two latches into the gap between the glass and the trim above the front seat (left and right).
- Insert the bolt (left and right the same)
- Need to push the shade up the top, as shown in the figure, align the screw eye (left and right the same)
- Use a Phillips screwdriver to screw (left and right the same)
- Cover the bare parts of the front seat like silver (Restoration is enough)
Smart electrice sunshade-FAQ guide
| issuse | reason | solution |
|---|---|---|
| After installation, press the button to not open or close | Check the cigarette | |
| lighter is connected | Reconnect the cigarette lighter | |
| Check that the pairings are connected | Connect the cable | |
| The installation does not match | Incorrect installation | Scan the QR code for |
installation instructions or installation video (front and rear bars are
correct)
Not stretch| Check the transverse bar is damaged during transportation|
Contact customer service processing
It’s gonna stall in the middle of it| The position is stuck| Pay attention to
the installation position
Crinkled| Installation technique| Straighten and fix the fold again
Hansshow offers a one-year extended warranty
Send us your customer number to get a full 1 year warranty
Email:support@hansshow.com
www.hautopart.com Designed by HANSSHOW
Documents / Resources
|
Hansshow Y Smart Electric
Sunshade
[pdf] User Guide
Y Smart Electric Sunshade, Smart Electric Sunshade, Electric Sunshade
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>