ONIKUMA T35 Bluetooth 5.1 Gaming Earbuds User Manual

Table of Contents

ONIKUMA T35 Bluetooth 5.1 Gaming Earbuds User Manual

*Please read the manual carefully and keep it for future use.

Indicator Light
Left Ear
Right Ear
(FMB) Touch Buttons
MIC
Type-c Charging Port
Charging Case
Charging Case battery Indicator
Put the earphones into the case and close the lid. It will be charging automatically. Green light of the case indicates the earphones are charging, and the light off indicates that earphones are fully charged.
When the case is opened, the RGB light is on. When the case is closed, the RGB light is off. Low battery status of the case: the light of the case is off. ( The earphones cannot be powered at this time)
Charging Case Indicator

The correct way to wear L is the left ear, and R is the right ear. For an more comfortable audio experience, please try on each size of ear tips. Try wear the earphone correctly so that the earphones are closely and firmly seated in your ears.
Outdoor
The human body contains a lot of water and has strong interference to Bluetooth signals. Generally, the main earphone is set to receive the Bluetooth signal of the mobile phone. It is recommended that try to put the mobile phone in the pocket on the side of the main ear to effectively prevent the human body from blocking the signal and to improve the anti-interference ability during using

Charging
a. Use a DC5V-1A Type-c charger to charge the case. When it is charging, the light flashes like heartbeating. When the case is fully charged, the light is on.
b. To charge the earphones, please put the earphones into the charging case and close the lid of the case. Then the earphones will be charged automatically. The green light of the charging case will be on when the earphones are charging, and the indicator light of the charging case will be off when the earphones are fully charged.
Connect the Equipment
a. After opening the lid of the charging case, the left and right earsphones are automatically turned on and paired.
b. Refresh the bluetooth device and search for T36. Then click to connect successfully.
Sngle Ear Connects the Equipment
a. The method of single earphone pairing is the same as the point 2. (Use the left ear alone, take out the left earphone and wait for about 10S to search for connection)

Power On	Hold the MFB for 3S
Power Off	Put the earphones into the case
Pause/Play Music	Tap the FMB
Previous Song	Double tap the FMB on the left ear
Next Song	Double tap the FMB on the right ear
Answer/Hang	Tap the FMB
Reject the call	Press and hold the FMB button for 2S
Turn On the Voice Mode	Press and hold the FMB for 1.5 seconds and then

release it after hearing the “beep”

The earphone cannot be detected by the mobile
a. To determine whether the headset is turned on, restart the earphone and mobile phone, and repeat the above actions to search.
b. To make sure that the headset is not connected to other Bluetooth devices.
The left and right earphones cannot be paired
a. Put the earphone into the charging box and then take out to reconnection.
b. Reconnect the headset after resetting it.
There is disconnections or noises in the connection between the earphone and the mobile phone
a. There are obstacles or other electrical signal interferences between the device and the earphone. Please keep the earphone and the device free of obstacles, and try not to use it in a complex environment.
b. The effective working range of earphones and equipment is up to 8 meters. Generally,the situation without obstacles can achieve the best results.There will be noises and disconnections beyond the effective distance.
The headphone cannot be charged.
a. Please make sure that the headset is connected with the charging box.
b. To make sure whether there are dirts or water stains on the charging contact point. Please keep it clean.