ANKER T8420 eufy Security Floodlight Camera User Guide
- June 13, 2024
- Anker
Table of Contents
ANKER T8420 eufy Security Floodlight Camera
Product Information
- Product: eufy Security Floodlight Camera (Model: T8420)
- Manufacturer: Anker Innovations Limited
- Trademark: eufy Security and eufy Security Logo
- Registered Trademarks: Anker Innovations Limited
- Other Trademarks: Property of respective owners
- Website: https://manual-hub.com/
Product Usage Instructions
Power On the Floodlight Camera Indoors
- Connect the Floodlight Camera to a power source.
- Wait for 1 minute or until the LED indicator blinks red.
Get the eufy Security App and Setup the Camera
- Download the eufy Security app from the App Store (iOS devices) or Google Play (Android devices).
- Login or sign up for a eufy Security account.
- Follow the onscreen instructions to complete the setup.
Mount Floodlight Camera Outdoors
Note: Ensure you have a junction box and wires already installed.
Step 1
- Unplug the Floodlight Camera.
- Ensure caution when working with electricity.
- Verify livestream video from Floodlight Camera before mounting.
Step 2
- Unscrew the power cord; wire nuts will be used later.
- The power cord is not required when mounting the Floodlight Camera outdoors.
Step 3
- Shut down the circuit breaker in your house.
- Switch on/off the lights to ensure proper electricity shutdown.
Step 4
- Remove the old Floodlight from the junction box.
- Install the mounting plate to the junction box.
Step 5
Note: Always exercise caution when working with electricity.
- Select the installation method (upside down or vertical) that suits your junction box position.
Step 6
- Hang the Floodlight Camera on the junction box using the provided hook.
Note: If you plan to install the Floodlight Camera on the wall, skip to
Step 6.
Note: For upside-down installation, turn the camera down to the end when
it’s hung.
Anker Innovations Limited. All rights reserved. eufy Security and eufy Security Logo are trademarks of Anker Innovations Limited, registered in the United States and other countries. All other trademarks are the property of their respective owners.
What’s in the Box
Install Floodlight Camera to the junction box outdoors (you need to have a
junction box and wires already installed).
In order to stream video from Floodlight Camera, you need to make sure the Wi-
Fi signal strength is strong at the location you want to install Floodlight
Camera.
To avoid risk of shock, injury or death, always be cautious when working with
electricity. Remember, do hire a professional electrician if you are
uncomfortable working with electrical wiring.
Power On the Floodlight Camera Indoors
- Connect Floodlight Camera to a power source, and then wait 1 minute or until the LED indicator blinks red.
Get the eufy Security App and Setup the Camera
Download the eufy Security app from the App Store (iOS devices) or Google Play
(Android devices).
Login or sign up for a eufy Security account, then follow the onscreen instructions to complete setup.
To avoid risk of shock, injury or death, always be cautious when working with
electricity.
Make sure you can livestream video from Floodlight Camera before mounting.
Mount Floodlight Camera Outdoors
-
Step 1
Unplug Floodlight Camera. -
Step 2
Unscrew the power cord; wire nuts will be used later.
The power cord is not required when mounting the Floodlight Camera outdoors. -
Step 3
Shut down the circuit breaker in your house. Switch on/off the lights to make sure the electricity in your house is properly shut off.
To avoid risk of shock, injury or death, always be cautious when working with electricity.
- Step 4
Remove the old Floodlight from the junction box and install the mounting plate to the junction box.
The junction box and existing electrical wires are required to Floodlight Camera installation.
The concaved side of the mounting plate must face outwards.
Step 5
- User can hang Floodlight Camera upside down or install it vertically on the wall. Select the installation method that best suits the position of your junction box.
To avoid risk of shock, injury or death, always be cautious when working with electricity. Remember, do hire a professional electrician if you’re uncomfortable working with electrical wiring.
If you plan to install the Floodlight Camera on the wall, please skip to Step 6.
- For upside down installation, turn the camera down to the end when it’s placed vertically, then turn the camera 180° in clockwise direction.
To avoid risk of shock, injury or death, always be cautious when working with electricity. Remember, do hire a professional electrician if you’re uncomfortable working with electrical wiring.
Step 6
- Hang Floodlight Camera on the junction box with the hook provided.
To avoid risk of shock, injury or death, always be cautious when working with electricity. Remember, do hire a professional electrician if you’re uncomfortable working with electrical wiring.
-
Connect both ground wires(yellow or green) from the junction box and Floodlight Camera, join the wires by using a wire nut.
If the existing ground wire has been connected to the junction box or there’s no ground wire, connect the ground wire of the Floodlight Camera to the junction box or mounting plate directly. -
Use wire nuts to connect Floodlight Camera wires to the rest of the wires from junction box. Connect the white wire on the Floodlight Camera to the white wire(neutral) from junction box. Connect the black wire on the Floodlight Camera to the black wire(hot) from junction box.
To avoid risk of shock, injury or death, always be cautious when working with electricity. Remember, do hire a professional electrician if you’re uncomfortable working with electrical wiring.
- Step 7
Insert the central screw through the center of Floodlight Camera and screw it tightly.
Use the central screw cap to cover the central screw to prevent the central screw from rusting.
-
Step 8
After installation is complete, you can turn the camera knobs on Floodlight Camera to adjust the camera to your desired angle. -
Step 9
Switch on the main circuit breaker in the house.
To check whether Floodlight Camera is operating, check if the LED indicator has turned solid white.
In case Floodlight Camera is not powered on, switch off the circuit breaker
before checking the wiring of Floodlight Camera.
To avoid risk of shock, injury or death, always be cautious when working with
electricity. Remember, do hire a professional electrician if you’re
uncomfortable working with electrical wiring.
In case Floodlight Camera keeps blinking red, it means the floodlight is not
connected to the Internet. Please make sure the Wi-Fi signal is strong at the
desired location. You may consider moving the wireless router closer to
Floodlight Camera or using a Wi-Fi range extender.
For troubleshooting, check the Help section in the Eufy Security app.
Refer to the app page for what the LED indicator status lights mean.
Safety
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The
device can be used in fixed/mobile exposure condition. The min separation
distance is 20cm.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables
to maintain compliance with FCC regulations.
The following importer is the responsible party
- Company Name: POWER MOBILE LIFE, LLC
- Address: 400 108th Ave NE Ste 400, Bellevue, WA 98004-5541
- Telephone:1-206-383-8247
This product complies with the radio interference requirements of the European Community.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this device is in compliance
with the essential requirements and other relevant provisions of Directive
2014/53/EU. For the declaration of conformity, visit the Web site
www.eufylife.com
Due to the used enclosure material, the product shall only be connected to a
USB Interface of version 2.0 or higher. The connection to so called power USB
is prohibited.
The adapter shall be installed near the equipment and shall be easily
accessible.
Do not use the Device in the environment at too high or too low temperature,
never expose the Device under strong sunshine or too wet environment.
The suitable temperature for the product and accessories is -20°C-50°C.
When charging, please place the device in an environment that has a normal
room temperature and good ventilation.
It is recommended to charge the device in an environment with a temperature
that ranges from 5°C~25°C. Please ensure to use only the charger offered by
the manufacturer. Using unauthorized charger may cause danger and violate the
authorization of the projector and the guarantee article.
This charger is for indoor use only
The charger output voltage/current is 5Vdc/2A. The plug considered as
disconnect device of adapter.
RF exposure information:
The Maximum Permissible Exposure (MPE) level has been calculated based on a
distance of d=20 cm between the device and the human body. To maintain
compliance with RF exposure requirement, use product that maintain a 20cm
distance between the device and human body.
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE
OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
Wi-Fi Operating Frequency Range:2412~2472MHz for EU;
This product is designed and manufactured with high quality materials and
components, which can
be recycled and reused.
This symbol means the product must not be discarded as household waste, and
should be delivered to an appropriate collection facility for recycling.
Proper disposal and recycling helps protect natural resources, human health
and the environment. For more information on disposal and recycling of this
product, contact your local municipality, disposal service, or the shop where
you bought this product. This device complies with Industry Canada licence-
exempt RSS standard(s). Operation is subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.”
This Class B digital apparatus complies with Canadian ICES-003.
IC RF Statement:
When using the product, maintain a distance of 20cm from the body to ensure
compliance with RF exposure requirements.
FCC ID: 2AOKB-T8420
IC :23451-T8420
Customer Service
-
Warranty
12- month limited warranty -
Call Us
United States +1 (800) 988 7973
Mon-Fri 9AM-5PM (PT)
United Kingdom +44 (0) 1604 936 200
Mon-Fri 6AM-11AM (GMT)
Germany +49 (0) 69 9579 7960
Mon-Fri 6:00-11:00 -
Email Us
Customer Support: [email protected]