PHILIPS URC-1313 TV Remote Control User Manual

: June 13, 2024
: Philips

Table of Contents

PHILIPS URC-1313 TV Remote Control
Product Information
Product Usage Instructions
Battery Installation
OVERVIEW
HOW TO USE
- STEP 2: IF STEP 1 DOES NOT WORK AS EXPECTED
LEARNING
Documents / Resources

PHILIPS URC-1313 TV Remote Control

PHILIPS-URC-1313-TV-Remote-Control-product

Product Information

The PHILIPS URC-1313 remote control is a versatile device that can be used to control various functions of your television. It features a compact design and is powered by 2 AAA batteries. The remote control has a range of buttons that allow you to navigate menus, adjust volume, change channels, access smart TV functions, and more. It also supports Fastest and playback control for your convenience. Additionally, the remote control comes with an Ambilight feature for an enhanced viewing experience.

Product Usage Instructions

Step 1: Set up your television

Insert 2 AAA batteries into the remote control.
Test some of the keys on the remote control. If they work, your remote is ready to use.
If some keys do not work, follow these steps:
Ensure your TV is turned on (not on standby).
Hold down the Red and blue buttons until the LED behind the Power Key blinks twice.
Point the remote control towards the TV and hold down the Power key until the TV turns off.
Release the Power key when the TV turns off.
The LED will blink twice to indicate success. Test the rest of the keys on the remote control. If they work as expected, your remote is ready to use.
If some keys still do not work, proceed to Step 2.

Step 2: If Step 1 does not work as expected

If some keys on the remote control still do not work as expected, follow these additional steps:

Ensure your TV is turned on (not on standby).
Hold down the RED + BLUE buttons until the LED behind the Power Key blinks twice. Point the remote control towards the TV and hold down the key that is not working correctly (e.g., Menu).
The remote control will send a signal every 3 seconds.
When the correct function is shown on the TV screen (e.g., the Menu), release the key.
The LED will blink twice to indicate success. Your remote control is now ready to use.

Learning a new function for your remote:

If you want to program your One For All remote to learn a function from your original remote, follow these steps:

Place the original remote facing the One For All remote on a flat surface.
Hold down the GREEN + YELLOW buttons on the One For All remote until the LED blinks twice.
Press 975. The LED will blink twice.
Press the key on the One For All remote that you want to learn (e.g., VOL + key). The LED will blink rapidly.
Press the corresponding key on the original remote that you want to learn (e.g., VOL + key of your Audio Device).
If the LED blinks twice, the learning process is successful.
- Repeat step 4 for any additional keys you want to learn.
If the LED blinks once for a longer duration, try again from step 4.
Once you have learned all the keys you need, press and hold the OK key for 3 seconds. The LED will blink twice to indicate success.

How to delete a learned function:

Hold down the GREEN + YELLOW buttons on the One For All remote until the LED blinks twice.
Press 976.
Press the key you want to reset twice.
The LED will flash twice, indicating that the key has been reset to its original function.

Battery Installation

PHILIPS-URC-1313-TV-Remote-Control-
fig-1

OVERVIEW

PHILIPS-URC-1313-TV-Remote-Control-fig-2

APP Netflix
INPUT Input Select
POWER Power
0-9 Digits for Channel Entry
SUB Subtitles
TEXT Teletext
GUIDE Guide
Info
OPTIONS Options
UP, DOWN, LEFT, RIGHT, OK Navigate the Menu
BACK Back, Last Channel
MENU Menu
HOME Home
EXIT Menu Exit, TV
CH + / – Channel Up and Down
VOL + / -Volume Up and Down
MUTE Mute
RED, GREEN, YELLOW, BLUE Fastest
STOP, PAUSE, REC, REW, PLAY, FF Playback control
AMBILIGHT Ambilight
SMART Smart TV
SETTINGS Tools, Settings

HOW TO USE

STEP 1: SET UP YOUR TELEVISION

After putting batteries in, just test some of the keys, and if they work, your remote is ready. If not, follow the next steps

Make sure your TV is on (not on standby).
Hold down Red + Blue until the LED behind the Power Key blinks twice.
Point towards the TV and hold down the Power key until the TV turns off
The remote will send a different Power signal every 3. seconds. As soon as the TV turns off, let go of the Power key.
The light will blink twice. Now test the rest of the keys on the remote, if they work as your original did, your remote is ready to use.

If you find some keys still do not work as expected (or at all), proceed to the next step.

STEP 2: IF STEP 1 DOES NOT WORK AS EXPECTED

ARE SOME KEYS NOT WORKING AS EXPECTED?

If you find some keys do not work as expected (or at all), proceed to the next step.

Make sure your TV is on (not on standby).
Hold down RED + BLUE until the LED behind the Power Key blinks twice
Point towards the TV and hold one of the keys that are not working correctly (for example Menu).
The remote will send a signal every 3 seconds.
When the correct function is shown on the screen (in this case the Menu), let go of the key.
The LED will blink twice – your remote is ready to use.

LEARNING

LEARN A NEW FUNCTION TO YOUR REMOTE
Your One For All remote can learn any function from your original (working) remote.

Place the original remote facing the One For All remote on a flat surface.
To learn: Hold down GREEN + YELLOW until the LED blinks twice.
Press 975. The LED will blink twice.
Press the key on the One For All remote you want to learn on, for Example: the VOL + key. The LED will blink rapidly.
Press the key on the Original remote you want to learn, for
- Example: the VOL + key of your Audio Device
Two blinks: OK. Repeat step 4 for any more keys to learn
- Long blink: try again from step 4.
When you have learned all the keys you need, press and hold the OK key for 3 seconds. The LED will blink twice.

HOW TO DELETE A LEARNED FUNCTION

Hold down GREEN + YELLOW until the LED blinks twice.
Press 976.
Press the key to reset twice.
The LED flashes twice and the key will revert to the original function.

PRODUCT DISPOSAL (EUROPEAN DIRECTIVE 2012/19/EU)

The crossed-out wheeled bin symbol on this product ensures that this product is manufactured using high-quality components that can be recycled and reused according to European Directive 2012/19/EU.
Please do not dispose of this product with your normal household waste, refer to local regulations for the proper collection or disposal of electrical and electronic products. This this will help in preventing negative effects on the environment and/or human health.

BATTERY DISPOSAL (EUROPEAN DIRECTIVE 2006/66/EC)

Please do not dispose of your batteries with your normal household waste, refer to local regulations for the proper collection or disposal. This will help prevent potential negative effects on the environment and/or human health. GUARANTEE TERMS AND CONDITIONS UNIVERSAL ELECTRONICS warrants to the original purchaser that this product will be free from defects in materials and workmanship under normal and correct use for a period of 3 years from the date of original purchase. This product will be repaired or if necessary, replaced free of charge if it has been proven to be defective within the 3-year warranty period. The forwarding costs are on the account of the owner; the costs of returning the product are on the account of UNIVERSAL ELECTRONICS.
This warranty does not cover damage or failures caused by products or services not supplied by UNIVERSAL ELECTRONICS, or which result from not mounting the product according to manual instructions. This also applies when the product has been modified/repaired by others than UNIVERSAL ELECTRONICS or if a fault is the result of an accident, misuse, abuse, neglect, mishandling, misapplication, faulty installation, improper maintenance, alteration, modifications, fire, water, lightning, natural disasters, wrong use or carelessness.
To obtain warranty service during the warranty period contact […], and please note that we need your original purchase receipt so that we may establish your eligibility for service. If you have bought this product for purposes that are not related to your trade, business or profession, you may have legal rights under your national legislation governing the sale of consumer goods. This guarantee does not affect those rights. www.oneforall.com

Connect with us

Manufactured (and imported into the EU) by Universal Electronics B.V.
PO. Box 3332, 7500 DH
Colosseum 2, 7521 PT
Enschede, The Netherlands
One For All” is a registered trademark of Universal Electronics Philips® is a registered trademark of Koninklijke Philips N.V., which is not affiliated with Universal Electronics.
www.oneforall.com