SCANDTAP R4 Solid Surface Scand Tap Bathroom Instruction Manual
- June 13, 2024
- SCANDTAP
Table of Contents
SCANDTAP R4 Solid Surface Scand Tap Bathroom
Product Information
- Product Name: Silicone
- Article Number: 46004
- RSK: 7503417
- Edition Date: 2023-06-29
Product Usage Instructions
Installation
- Install the basin in accordance with illustration A.
- For detailed installation instructions, refer to the user manual.
Maintenance
- Clean the basin regularly with a soft cloth and lukewarm water.
- If necessary, use soap for stubborn stains.
- Rinse the basin with clean water.
- Dry the basin with a soft cloth.
Scratch and Discoloration Removal
- Clean the basin with a soft cloth and a mildly abrasive cleaning agent.
- Rinse the basin with clean water.
- If scratches or discolorations remain, use sanding pad/sandpaper with a grade of P800-P1000.
- Start by polishing the affected surface using the sanding pad/sandpaper.
- For more information on the sanding pad, visit scandtap.com (article number 81001).
If you have any further questions or need assistance, please contact your retailer or visit www.scandtap.com.
TOOL REQUIRED
Installation
Install the basin in accordance with illustration A.
Maintenance
Avoid that the basin comes into contact with the following:
- Acetone
- Acids and cleaning agents that contain Chloromethane
- Petroleum-based cleaning agents
- Solvents, Thinner
- Drain cleaners
- H2O >70°C
Also avoid that the surface of the basin comes into contact with coloured substances such as cosmetics for longer durations. In case of such contact, rinse with lukewarm water and, if necessary, soap.
Cleaning
- Clean the basin regularly with a soft cloth and lukewarm water. If necessary, use soap.
- Afterwards, rinse with clean water and then dry the basin with a soft cloth.
In case of scratches or discolorations:
Scratches and discolorations can under normal circumstances be removed simply
by polishing the affected surface with a sanding pad/sandpaper with a grade of
P800-P1000.*
- Start by cleaning the basin with a soft cloth and a mildly abrasive cleaning agent.
- Rinse with clean water and dry with a soft cloth.
- If the scratch or discolouration remain, apply a sanding pad/sandpaper with a grade between P800-P1000 on the affected area and polish with even circular movements.
- In case of deeper scratches, it may be necessary to first polish the surface with a rougher grade of sanding pad/sandpaper, and then switch to increasingly finer grades. Start with P240, then switch to P400 and finally P800-P1000.
- Lastly, repeat step 1–2 for final polishing.
*Sanding pad is available from Scandtap with article number 81001. For more information, visit scandtap.com.
If you have any other question, please contact your retailer or visit www.scandtap.com
ABOUT COMPANY
- Scandtap AB, Olofsdalsvägen 21, 302 41 Halmstad, Sweden
- +46 35 260 75 80,
- info@scandtap.com
- www.scandtap.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>