i-PRO WV-QJB504 Base Bracket Instruction Manual

Operating Instructions
Included Installation Instructions
Base Bracket
Model No. WV-QJB504

WV-QJB504 Base Bracket

• Before attempting to connect or install this product, please read these instructions carefully and save this manual for future use.
• The external appearance and other parts shown in this manual may differ from the actual product within the scope that will not interfere with normal use due to improvement of the product.
  i-PRO Co., Ltd. assumes no responsibility for injuries or property damage resulting from failures arising out of improper installation or operation inconsistent with this documentation.
  “<Control No.: C**>” used in these documents should be used to search for information on our technical information website
  ( https://i-pro.com/global/en/surveillance/training**

https://i-pro.com/global/en/surveillance/training-support/support /technical-information

“<Control No.: C**>” used in these documents should be used to search for information
on our technical information website (https://i-pro.com/global/en/surveillance/trainingsupport/support/technical- information) and will guide you to the right information.
Caution:**

• Before attempting to connect or operate this product, please read these instructions carefully.

Notice:

• This product is not suitable for use in locations where children are likely to be present.
• Do not install this product in locations where ordinary persons can easily reach.
• For information about screws and other parts required for installation, refer to the corresponding section of this document.

Precautions

• Refer installation work to the dealer.
  Installation work requires technique and experience. Failure to observe this may cause fire, electric shock, injury, or damage to the product.
  Be sure to consult the dealer.

• Install the product securely on an installation surface in accordance with the installation instructions.
  Failure to observe this may cause injury or accidents.

• The screws and bolts must be tightened to the specified torque.
  Failure to observe this may cause a drop resulting in injury or accidents.

• Do not use this bracket except with suitable cameras.
  Failure to observe this may cause a drop resulting in injury or accidents.

• Do not rub the edges of metal parts with your hand.
  Failure to observe this may cause injury.
  When using this product, also read the “Precautions” described in the operating instructions for the camera to be attached.

Preface

This product is a base bracket for a camera.
Use this product when using a conduit to make wiring or when there is no enough space to make wiring behind the inatallation surface.
The latest information about the supported cameras

inches (D) x 1-21/32 inches (H)}
Mass:| Approx. 335 g {0.74 Ibs}
Finish:| Main body: Aluminum die cast, i-PRO white Conduit cover: PC resin, i-PRO white

Precautions for installation

• In order to prevent injury, this product must be securely mounted to the installation surface according to Installation Guide.
• Make sure to remove this product if it will no longer be used.
  < Example of mounting>

Standard Accessories

Operating Instructions (this document) ……. 1 pc.
Fixing screw for attachment plate (M4 x 8 mm) … 5 pcs. (of them, 1 for spare)
Template (for mouting base) ……………………1 pc.

Other items that are needed (not included)

• Fixing screw
  Installation method| Recommended screw| Minimum  pull-out strength 2
  ---|---|---
  Directly mount the camera onto the installation surface.| M4 × 16 mm {5/8 inches} 4 pcs. or 2 pcs.* 3| 196 N {44 lbf}

1 Select screws according to the material of the location that the camera will be mounted to. In this case, wood screws and nails should not be used.
2 This value indicates the minimum pull-out strength required value per screw. For information about the minimum pull-out strength, refer to our technical information website .
*3 The screw length is an example when installing the camera on a robust ceiling or wall with a thickness of 20 mm {25/32 inches} or more.

• 5 mm (distance between two parallel sides of a hexagon) hex wrench

Parts and functions

Installation

Step 1 Make a hole on the installation surface using template (accessory).
(Screw holes M4 (4 places or 2 places) / Cable access hole (1 place))

*1 For wiring after making a hole on the installation surface.

Note:

• Select an installation pattern referring to the table and make fixing screw holes.
• When using a conduit, it is unnecessary to prepare a cable access hole.
• Depending on the condition of the installation surface, the following six patterns of screw positions are available for fixation.

| Vertical| Horizontal
---|---|---
A| 85 mm {3-11/32 inches} (85.7 mm {3-3/8 inches})| 85 mm {3-11/32 inches} (85.7 mm {3-3/8 inches})
B| 138 mm {5-7/16 inches}| 138 mm {5-7/16 inches}
C| 83.5 mm {3-9/32 inches}| 46 mm {1-13/16 inches}
D| 63 mm {2-15/32 inches}| 63 mm {2-15/32 inches}
E*| –| 83.5 mm {3-9/32 inches}
H| 46 mm {1-13/16 inches}| 83.5 mm {3-9/32 inches}
J| 83.5 mm {3-9/32 inches}| –

• When mounting to a single-gang junction box, fix with two fixing screws (M4: locally procured).
  Step 2 * The following illustrations are provided to explain the case when using a conduit as an example.
  Minimum pull-out strength of mounting screw (M4: locally procured): 196 N {44 lbf} / per 1 pc.

Step 3

• When using for WV-U65300-ZY series
• When using for WV-U65302-Z2/ WV-U65301-Z1 series

Step 4 Refer to the instructions of how to fix the camera and of how to make connection in the installation guide or the installation procedure leaflet of each camera

• When using for WV-U65300-ZY series
• When using for WV-U65302-Z2/WV-U65301-Z1 series

i-PRO Co., Ltd.
https://www.i-pro.com/
© i-PRO Co., Ltd. 2022
Ns0522-0 Printed in China

Documents / Resources

| i-PRO WV-QJB504 Base Bracket [pdf] Instruction Manual
WV-QJB504 Base Bracket, WV-QJB504, Base Bracket
---|---
| i-PRO WV-QJB504 Base Bracket [pdf] Instruction Manual
WV-QJB504 Base Bracket, WV-QJB504, Base Bracket, Bracket

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>