TOPDON Phoenix MDCI Lite Smart Automotive Diagnostic System Instruction Manual
- June 13, 2024
- TOPDON
Table of Contents
TOPDON Phoenix MDCI Lite Smart Automotive Diagnostic System
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 Of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment Off and on, the user is encouraged to try to correct the interference by one or more Of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
NOTE 2: Any changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user’s authority to
operate the equipment.
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
IC Warning
“This device complies with Industry Canada’s license-exempt RSSs. Operation is
subject to the following two conditions: (1) This device may not cause
interference; and (2) This device must accept any interference, including
interference that may cause undesired operation of the device ‘
Welcome
Thank you for purchasing the TOPDON connector Phoenix MDCI. Please read and
understand this user manual prior to the operation
About
TOPDON Phoenix MDCI features comprehensive diagnostic capabilities. The
accuracy of test readings, expanded vehicle coverage, improved speed and an
abundance of user-friendly nature makes this diagnostic tablet stand out in
its class and give mechanics and professionals a great deal of help in their
diagnostic work
Initial Use
The following settings should be made when you initially use the device
Phoenix MDCI Lite
Warnings
- Always perform automotive testing in a safe environment.
- DO NOT smoke near the vehicle during testing
- DO NOT place the diagnostic tool near the engine or exhaust pipe to avoid damage from high temperatures.
- DO NOT wear loose clothing or jewelry when working on an engine
- DO NOT connect or disconnect any test equipment while the ignition is on or the engine is running
- DO NOT disassemble the code reader.
- Engine parts will become hot when the engine is running. To prevent severe burns, avoid contact with hot engine parts.
- When an engine is running, it produces carbon monoxide, a toxic and poisonous gas. Operate the vehicle ONLY in a well-ventilated area.
- Wear safety eye protection that meets ANSI standards.
Cautions
- Please ensure that the vehicle battery is fully charged and the scanner is firmly connected to the vehicle DLC to avoid erroneous data generated by the scanner and diagnostic systems.
- Please do not use the diagnostic tool while driving
- Keep clothing, hair, hands, tools, test equipment, etc. away from all moving or hot engine parts
- Keep the scanner dry, clean, and free from oil/water, or grease. Use a mild detergent on a clean cloth to clean the outside of the scan tool, when necessary
- Keep the scanner out of the reach of children
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>