KOSMEN KM-A65 Smart Air Purifier User Manual

KOSMEN KM-A65 Smart Air Purifier

Product Information

Smart Air Purifier KOSMEN KM-A65
This Smart Air Purifier uses advanced purification technology, specifically HEPA technology, to provide high purification efficiency and speed. It is designed to remove particulate matter, including PM2.5 and PM10, from the ambient air. The purifier is equipped with a built-in air quality sensor that automatically detects the air quality and displays it using color indicators. The device also comes with a remote control for convenient operation.

Product Overview

• Diffusion outlet
• Touch key
• Display panel
• Air inlet
• Bottom cover
• Sensor cover
• Filter
• Remote control

Set up

1. Installing the filter: All filters are included inside the purifier. Before using the product, remove the packaging of the filter by following these steps:
   • Ensure the filter is plugged into a proper power source.
   • Turn the bottom cover clockwise to open.
   • Remove the filter from the purifier.
   • Remove the packaging material from the filter.
   • Place the filter back into the purifier.
   • Put the bottom cover of the filter back and turn counterclockwise to tighten.

Air Quality Indicators

The air quality indicator is a built-in feature that measures air quality and automatically selects the appropriate color indicator. The colors represent different air quality levels:

• Blue: Very good
• Dark purple: Ok
• Red: Poor

The air quality indicator turns on automatically when the device is turned on. It changes color based on the detected indoor air quality.

Introduction to the product

This air purifier uses advanced purification technology, HEPA technology as the working principle, with high purification efficiency, and purification speed amongst other significant features.
Please read the “Safety Precautions” section to ensure safety.

Important
Caution: Keep away from water, liquids, or flammable liquids to avoid the risk of electric shock and/or fire.

Warning

• Before using the device for the first time, please ensure that the voltage indicated on the back or bottom of the appliance matches the local voltage.
• Do not use the appliance if the plug, power cord, or appliance itself is damaged.
• The damaged power cord must be replaced immediately by authorized personnel.
• Service/repair must be performed by a qualified technician, in compliance with the manufacturer’s instructions and following local safety norms.
• Physically or mentally disabled people, children, and people without any experience with the product are only allowed to use the appliance if they have had specific training on how to operate the appliance by a person responsible for their security and well-being. The appliance is not intended for use by disabled people and very young children without supervision.
• Do not clog the inlet and outlet, for example, do not place objects on the air outlet or in front of the air inlet.
• This product is not intended to be used as medical equipment.
• This product is not a substitute for normal ventilation, daily vacuum cleaners, or hoods used in cooking.
• If the power outlet is in poor contact, the device may become hot. Make sure that the power cord is properly plugged in.
• Place and use the appliance on a dry, stable, flat, and level surface.
• Leave at least 20 cm of space on the rear and sides of the appliance and at least 30 cm on the top of the product.

Introduction to the product

• Do not place anything on top of the appliance or sit on it.
• Do not place the appliance directly under the air conditioner to prevent condensation from dripping into the appliance.
• Before powering on the appliance, make sure that all filters are properly installed.
• Only use the original filters designed specifically for this product by the manufacturer. Do not use any other filters. Do not tap the appliance with hard objects (especially inlet and outlet) and do not insert fingers or other objects into the air in and out.
• Do not use this product while spraying insect repellents or in places filled with oily, flammable gases or chemical fumes.
• Do not use the appliance near gas appliances, heating units, or stoves.
• Always unplug the power supply after use and before cleaning the appliance.
• Do not use the device in rooms with large temperature changes, as this may cause condensation inside the device.
• To prevent interference, maintain a distance of at least 2 meters between the device and appliances that use radio waves, such as televisions, radios and radio control clocks.
• Do not use the device in wet or high-temperature environments such as bathrooms, toilets, or kitchens.
• This product does not remove carbon monoxide (CO) or helium (R n) and therefore cannot be used as a safety device in the event of combustion and hazardous chemical accidents.

About PM 2.5

• PM2.5: Refers to particulate matter, also known as fine particulate matter, with an aerodynamic equivalent diameter of less than or equal to 2.5 microns in ambient air.(The higher this value, the more serious the air pollution). Inhalable particulate matter, also known as PM10, refers to particulate matter with an aerodynamic equivalent diameter of less than 10 microns.
• According to the World Health Organization’s 2008 Microbiological Risk Assessment Report, avian influenza, influenza viruses, Legionella bacteria, hepatitis B virus and SARS coronavirus are about 0.02 microns in size.

Product Overview

1. Diffusion outlet
2. Touch key
3. Display panel
4. Air inlet
5. Bottom cover
6. Sensor cover
7. Filter
8. Remote control

VI. Set up
Installing the filter

All filters are included inside this purifier, but it is important to remove the packaging of the filter before using the product. Follow the instructions below to remove all filters and remove their packaging, then put them back in the purifier.

• Note: Ensure the filter is plugged into a proper power source. Turn the bottom cover clockwise to open
• Remove the filter from the purifier
• Remove the packaging material from the filter
• Place the filter back into the purifier
• Put the bottom cover of the filter back and turn counterclockwise to tighten

Air Quality Indicators

• Air quality color Air quality
• Blue Very good
• Dark purple Ok
• Red Poor

Note: Built-in air sensing measures air quality and automatically selects the appropriate color for the air quality indicator, which is blue when the air is clean, and changes from dark purple to red when air quality deteriorates.

The air quality indicator turns on automatically when the device is turned on.

1. Plug the power cord of the device into the socket
   • →A beep is heard and all the lights come on at the same time after that, the lights will go out again.
   • →The air quality indicator will show the air quality at that time.
2. Press the button to turn on the purifier
   • → Smart and fan speed indicators on.

Note: When the purifier is turned on, the air quality sensor takes a short time to detect indoor air quality
The air quality indicator changes color and eventually stays on the color corresponding to the accurate indoor air quality.

How to use
Using the Smart Air Purifier for the first time

• Press and hold the button to turn off the Purifier

Note: If the machine is unplugged, settings on the machine are reset to smart mode.

Turning the purifier on/off

Technical parameters

• Rated Voltage: AC220V/50Hz
• Power: 68W
• Ipion Volume: 30 Million cc
• Particulate CADR: 513m/h
• Air Volume : 810m/h
• Applicable Area :40-60m’
• Size: 320x320x660mm
• Weight: 7.05kg

Instructions for use
Introduction to the use of control keys

• Power on/off function
  The device has the following fan speed settings

• 1. Smart 2. Level1 3.Level2 4.Level3 5. Level4 6. Automatic (based on the sensor feedback operating gear)
  

• The appropriate fan speed can be selected according to the requirement. The four lights on the control panel correspond to the setting and the display panel also displays the setting.

• The timer function can be used to set the device’s running time. The device will automatically shut down once the settings are met.

• The display panel displays the timer settings. 1H, 4H, 8H, 12H, display time for the corresponding work time.

• Controls the device’s negative ion switch function.

• In models with UV light, this also controls the UV function.

• Function controls the diffusion settings.

• Press and hold the WiFi button for 5 seconds to enter the setup mode (this function is Wi-Fi optional)

Child locks

To set up a child lock, press and hold the buttons for 3 seconds. The display panel shows the setting. Repeat the step to unlock the child-lock.

Humidify Function (Purified Water )
Check the tank for liquid before turning on the diffusion function. The device may be damaged if the function is turned on without sufficient liquid in the tank.

1. The atomizer is fixed in place with magnets. Gently lift it up to remove it.
2. Fill the liquid tank to the marked level and replace it with the device.
3. Put the atomizer module back into the device, carefully positioning the column and groove into alignment.

Cleaning the Device

Note:

• While shifting the device, make sure that the power plug has been unplugged.
• Always unplug the power cord before cleaning the purifier.
• Do not immerse this device in water or any other liquid.
• Do not clean any part of the device with abrasive, corrosive, or flammable cleaners such as bleach or alcohol.
• Only pre-filters can be cleaned with water.

Cleaning the purifier
Clean the device inside and outside regularly to prevent dust build-up.

1. Use a soft, dry cloth to wipe the dust off the body.
2. Clean the air quality sensor inlet/air outlet with a soft dry cloth

Cleaning the Air Quality Sensor
Clean the air quality sensor every 2 months to ensure that the device is operating at optimum performance levels. If the device is used in a used in a dusty environment, clean it frequently.

Note: When humidity is very high indoors, condensate may form on the sensors leading to poor air quality indication. In this case, you must clean the air quality sensor or use any manual speed setting.

1. Use a soft brush to clean the Air Quality Sensor inlet/air outlet.
2. Remove the protective cover of the Air Quality Sensor.
3. Use slightly wet cotton swabs to clean the Sensor, air inlet and outlet.
4. Dry it with a dry cotton swab.
5. Replace the protective cover of the Air Quality Sensor.

Replace the filter

Filter replacement light

Note:

• The life of the filter depends on how much air the purifier cleans and may vary depending on how the user uses it.
• In environments with heavy air pollution, the life of the filter may be shorter than recommended.
• If you remove the front panel to replace the filter when the purifier is on, all lights will go out.
• When the front panel is put back into the purifier, it starts running in its previous state.
• The replaceable filter is not washable or cleaned by the vacuum cleaner.

Note

• Place the filter in the correct position.
• Make sure that the side with the pull piece faces you.

1. Turn off the Purifier and unplug it.

2. Screw clockwise to remove the bottom cover of the Filter.

3. Remove the filter from the Purifier.

4. Hold both sides of the discarded filter and gently place it in the trash.
   Note: Avoid contact with the surface of discarded filters and do not smell discarded filters containing airborne contaminants.

5. Remove the packaging material from the filter network.

6. Put the filter in the Purifier.

7. Put the bottom cover of the filter to the good installation position, counterclockwise direction tightening.

8. After the user replaces the filter, re-power touch the replacement filter key for 5 seconds.
   The filter timing is Zeroed and the timing is restarted and the machine is running normally.

Troubleshooting

This chapter summarizes the problems you encounter most often when using Purifiers. If you are unable to resolve the issue based on the information below, please contact with us

the filter and reset the purifier.
There is no air discharge in the air outlet.| The purifier is not connected to the power supply plug the purifier into the power supply and start the appliance.
When mute mode is enabled, the wind speed does not change| In silent mode, wind speed is set at a very low level.

The air flow from the outlet is significantly less than before.

| You have not removed all packaging materials from the filter. Make sure you have removed all the packaging materials.

Even though the purifier has been running for a long time, the air quality has not improved significantly

| The air quality sensor is wet. Indoor humidity is too high, resulting in condensate.

Make sure that the air quality sensor is clean and dry (see clean Air Quality Sensor).

The color of the air quality indicator remains the same.| The air quality sensor becomes dirty. Clean the air quality sensor (see Clean Air Quality

Sensor).

I am an allergy sufferer and need cleaner and fresher air.| You can change the sensitivity of the air quality sensor to allow the purifier to purify the air more fully and nuancedly.

The purifier is too loud.

| You have not removed all packaging materials from the filter. Make sure you have removed all the packaging materials.

The wind speed is too high, and you can change the fan speed to reduce the fan speed level.

I’ve replaced the filter, but the purifier still prompts you to replace the filter.| You may not have pressed the button button correctly for a filter reset.
Turned on the diffusion function but there is no diffusion.| There is not enough liquid in the tank Capillary rods do not come into good contact

with the atomizer.

Warranty and service

Note

• Electromagnetic Field (BMF)
• This product complies with all applicable standards and regulations regarding exposure to electromagnetic fields.
• Our main operating principle is to take all necessary health and safety measures for our products to comply with all applicable legal requirements, committed to the development, production, and sale of products that do not pose any harm to human health.
• Reclaim
• When disposing of a product, do not dispose of it with ordinary household waste and return it to an official recycling center. This is good for the environment.

Kosmen Joint Stock Company

• Head office: No 88B, Street 51, Ward 14, Go Vap District, Ho Chi Minh City, Vietnam.
• Ha Noi office: No. 3 Lane 495 Nguyen Trai, Thanh Xuan Nam Ward, Thanh Xuan District, Ha Noi City, Vietnam.
• Da Nang office: No 385B Hai Phong, Tan Chinh Ward, Thanh Khe District, Da Nang City, Vietnam.
• Hotline: 0888 787 959

References

• Kosmen Việt Nam | Máy Hút Ẩm, Máy Lọc Không Khí Công Nghệ Đức

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>