Haino Teko P3 Wireless Earbuds User Manual

Haino Teko P3 Wireless Earbuds User Manual

Product Diagram

Package List

• P3+ Wireless Earbuds P3
• Charging Case
• Type-C  Charging Cable
• User Manual
• Ear Caps

Functional Operating Instructions

1. Tumen
   Open the case and take out the earbuds, they will automatically turn on OR hold the MFB for as to power on

2. Tum of
   Put the buck into the case, they will tum of automatically and begin to charge. Also, they will sum off when there is a connection in 5 ms. You can turn them off manually by holding FB when no connection

3. Reconnect
   After stem pacing, the earbuds will enter reconnect state when power on, which makes them automatically reconnect to the previous device.

4. Play Pause
   In standby mode, press the must-function button on ether earbud to play a track direct Press the multi-function button on either earbud to pause the track on the go.

5. Neat Previous
   Track Press twice quickly left earbuds must-function button to back to the previous song while playing music and the right earth’s multi-function button to sp to the neat track

6. Volume Up Down
   Hold the Lufton’s multi-function button for 2s until you hear a beep sound to decree the volume shop by shop. Hold the right one’s must-function button for 2 until you hear a beep sound to increase the volume step by step
   Warm notice
   For each single earbud, you cannot play the previous track or tum down the volume with must-function button when it is working individually

7. Answer Call
   When a phone call comes, press either earbuds multi-function button to

8. Hang Up
   When calling dick either earbud’s multi-function button one same to hang up the call

9. Reject Coll
   When a phone call rings, hold either earbuds multi-function button for 1a to reject

10. Voice Assistant
    Press the right earbuds must-function button three times to activate Apple Siri or Google Voice Assistant for voice control

11. Low Battery
    Alert When the wireless earbuds are in low battery a low-battery alert will be played every 30s until sums off

Make sure the ear caps a down and put on the earbuds as shown above.

Afterwards, gently rotate the earbuds to a comfortable and secure position as it shown in the picture. Now, you got them on correctly!

Pairing

1. Tear off the elating film.
2. Put the earbuds back into the case to charge (when chirping, that barbuds will shred light and be activated).
3. Open the case and take out the earbuds. They will power on themselves and wait for pairing (red and blue light flashing beat Note: When there is no sound the ads do not power on, please put them back into the case and close it and ensure that they are charging and then take them out to use again (red and blue light flashing alternately
4. After pairing, one light will go out and the other one will fat red and blue mutely
5. Tum on the Bluetooth function on your phone and search for P3+ and connect it.

If you want to switch to another device, please disable Bluetooth on the previous device OR delete “P+” in Bluetooth on the previous device. Than “P9+”can be searched in a new device and connected to t

Charging

1. If the charging case is out of power, it may cause the earbuds to fall to shut down and remain connected to the phone even when they are placed in the charging case. So please remember to charge the changing case in time
2. Please use a charger with an output voltage of DC5V1A to charge the charging case. You can also use a computer USB or other USB interface charger to charge (Please choose a charger certified by a regular manufacturer)

Product Speculations

• Model Number : P3+
• Bluetooth Version: V5.3+EDR
• Compatible Mode: A2DP,AVRCP,HFP,HSP
• Transmission Distance: 10 Meters (No Barriers)
• Frequency range: 2.402GHz-2.480GHz
• *Hi-Fi Equipment:010mm2 Impedance:** 320
• Standby Time: About 60hrs
• Play Time: About 3.5hrs
• Call Time: About 3hrs
• Battery Specification: Earbud(s) 3.7V/25mAh; Charging Case 3.7V/180mAh
• Charging Time: About 1 hour
• Weight(Single Earbud): 3.1 g

Earbuds indicator

• Power on: Blue light flashes for is
• Power off: Red light flashes for ls and goes out
• Pairing: Red and blue light flashes alternately
• Connected: No light
• Music/Call: No light
• Low battery: Red light flashes every 5s
• Charging: Red light on
• Fully charged: Red light off

Charging case indicator

• Charging: Red light flashing
• Fully charged: Red light on
• Charging Earbud(s): Blue light on
• Low battery: Red light flashing

Restore factory setting

1. Clear the record: Turn off Bluetooth on the phone, and quickly press MFB button four times when the earbuds power on but not connected.
2. After resetting, please delete ‘P3+’, and search for ‘P3+’ again for pairing.

Attention

1. Please charge in a safe environment. When charging the case, please separate the charging case from the USB charging cable as soon as possible after the charging indicator light indicates full charge to avoid damage to the charging case if it is left plugged in for a long period of time.
2. When playing music, please adjust the music to the appropriate volume level to avoid hearing damage caused by prolonged exposure to high volume.
3. Try to avoid using this in places where there are sources of interference, or else it may have an impact on signal transmission.
4. Try to avoid using the headset in a corrosive environment, so as not to affect the function of the earbuds.

Warm reminder: When you use them for music listening or call answering, please pay attention to the volume, so as to avoid excessive volume to your hearing!

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>