GOAL ZERO TANK PRO 4000 LiFePO4 Expansion Battery User Guide

GOAL ZERO TANK PRO 4000 LiFePO4 Expansion Battery

Product Information

The Tank PRO 4000 is a chainable 4000Wh Lithium Iron Phosphate Battery designed to be used with the Yeti PRO 4000. Together, they increase your energy storage capacity. The Tank PRO 4000 adds an additional 4000-Watt hours to your home, RV, or off-grid storage system. It is compatible with Goal Zero Solar Panel (sold separately) and can be connected to an AC Wall Outlet for charging.

Product Usage Instructions

1. Ensure that the cable is fully inserted into the expansion port on the back of the Yeti PRO 4000 before use. Check upon subsequent uses.
2. Place the Tank PRO 4000 on a flat level surface or Mounting Plate.
3. The side of the Yeti PRO 4000 closest to the fixed bracket on the Tank PRO 4000 will be installed first.
4. Lift the Yeti PRO 4000 with the side facing the fixed bracket tilted slightly downward.
5. Align the bracket on the Tank PRO 4000 with the slot on the bottom of the Yeti PRO 4000 and slide into place.
6. Ensure that the feet on the Yeti PRO 4000 are aligned with the feet pockets in the lid of the Tank PRO 4000.
7. Once aligned, lift and align the latch on the opposite side of the Tank PRO 4000 with the slot in the bottom of the Yeti PRO 4000 and lock into place.
8. Plug the Tank PRO cable into the QS10 port on the Yeti PRO 4000. If using extension cables, plug the Tank PRO cable into the female end of the extension cable, then plug the extension cable into the Yeti PRO or Tank PRO 4000.

For any questions or assistance, contact the Goal Zero Solutions Center at support@goalzero.com or 1-888-794-6250.

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS
Please read all warnings, instructions and cautions carefully before use to avoid personal injury, property damage or damage to your Tank PRO 4000, or any connected products. Goal Zero reserves the right to update this document without prior notice. Please visit www.goalzero.com to find the latest product information and the most recent version of the User Guide.

• WARNING:  Observe and carefully follow all connector ratings. There is a risk of excessive heat, melting, fire, or electric shock from the use of accessories, charging cords, or other electrical connections if the appropriate connector ratings do not match the Tank PRO 4000 connector ratings. Consult your product manuals for information about electrical connector ratings.

• WARNING:  Ensure all connectors and accessories are tightly and securely plugged in. Loose connections can lead to fire and other risks.

• WARNING:  DO NOT allow the unit to be dropped, seriously jarred, punctured, or otherwise damaged.

• WARNING:  DO NOT use your Tank PRO 4000 if it is damaged or modified.

• WARNING:  DO NOT allow foreign objects to enter into inputs, outputs or ventilation holes.

• WARNING:  DO NOT open you Tank PRO 4000 or tamper with or attempt to replace your battery.

• WARNING:  DO NOT allow children to use the Tank PRO 4000.

• WARNING:  To reduce the risk of damage to the electric plug and cord, pull the plug rather than the cord when disconnecting and connectors or plugs.

• WARNING:  Two-person lift required. Please use caution when lifting the power station to prevent injury to yourself or the unit. We recommend using the wheeled cart when the power station is on flat ground.

• WARNING:  Always utilize the Mounting Plate (SKU 96155) and ensure all latches are tightly secured when stacking the Tank PRO 4000 and Yeti PRO 4000. TIPPING HAZARD: Never stack more than four Yeti Tanks with one Yeti PRO 4000. Stacking products without the mounting bracket can constitute a tipping hazard and lead to injury. Stacking more products than recommended can lead to damage to the products and an injury hazard. Never step or climb on any Goal Zero products and never allow a child to step or climb on or around the products.

• WARNING – DO NOT charge, turn on or otherwise use your Tank PRO 4000 if it is submerged or exposed to a significant amount of liquid, or if any liquid enters the unit casing. If internal components get wet, your Tank PRO 4000 must
  be disposed of. Failure to comply with these guidelines could cause serious damage, injury, or death. In this case, isolate it in a fire safe location before disposal. Contact your local fire department if you see any sparks or smell burning. Contact a local fire department or a local battery recycling center for instructions on battery disposal requirements in your area. More information about safely recycling batteries can be found at:
  https://www.epa.gov/recycle/used-household-batteries

• Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.

• WARNING:  DO NOT expose the Tank PRO 4000 to extreme temperatures (greater than 140 degrees F/60 degrees C or less than -4 degrees F/-20 degrees C).

• WARNING:  Keep your unit in a dry, well-ventilated area when in use and do not obstruct fan openings. Inadequate ventilation may cause damage to your device.

• WARNING:  DO NOT expose the unit to strong electrostatic or electromagnetic conditions.

• WARNING:  DO NOT use your Tank PRO 4000 with life-saving medical equipment. Take special care whenever using your device with medical equipment or around medical equipment and ensure that the specified requirements of the medical equipment are compatible with the device. Your Tank PRO 4000 is not a certified Uninterruptable Power Supply and has not been tested to hospital-grade standards or any standards specifically related to medical equipment.

WARNING: Be sure the cable is fully inserted into the expansion port on the back of the Yeti PRO 4000 before use. Check upon subsequent uses. For questions, contact the Goal Zero Solutions Center at support@goalzero.com or 1-888-794-6250.

Getting Started

In the Box

1. Tank PRO 4000
2. User Manual

How it Works
The Goal Zero Tank PRO 4000 must be used with a Yeti PRO 4000. Together, they increase your energy storage capacity. The Tank PRO 4000 is a chainable 4000Wh Lithium Iron Phosphate Battery that adds an additional 4000-Watt hours to your home, RV, or off-grid storage system. Once the Tank is connected to the Yeti and the stabilization period is complete, the power will be sourced equally across the devices so they operate like a single unit.

Get To Know Your Gear

• FRONT
• BACK

Set Up Instructions

• The Tank PRO 4000 is designed to stack with the Yeti PRO 4000. The Yeti PRO 4000 should always be at the top of the stack.
• The Tank PRO 4000 is designed to securely attach to the bottom of the Yeti PRO 4000 with a fixed bracket on one side and a latch on the other.

First Tank PRO 4000

1. Place the Tank PRO 4000 on a flat level surface or Mounting Plate.
2. The side of the Yeti PRO 4000 closest to the fixed bracket on the Tank PRO 4000 will be installed first.
3. Lift the Yeti PRO 4000 with the side facing the fixed bracket tilted slightly downward.
4. Align the bracket on the Tank PRO 4000 with the slot on the bottom of the Yeti PRO 4000 and slide into place.
5. Ensure that the feet on the Yeti PRO 4000 are aligned with the feet pockets in the lid of the Tank PRO 4000.
6. Once aligned, lift and align the latch on the opposite side of the Tank PRO 4000 with the slot in the bottom of the Yeti PRO 4000 and lock into place.
7. Plug the Tank PRO cable into the QS10 port on the Yeti PRO 4000. If using extension cables, plug the Tank PRO cable into the female end of the extension cable, then plug the extension cable into the Yeti PRO or Tank PRO 4000.

Subsequent Tank PRO 4000 Setup

1. Turn off the power on all devices.
2. Unplug the Yeti from existing Tanks.
3. Unlatch the brackets that connect your Yeti PRO 4000 to the Tank.
4. Carefully lift the Yeti off of the Tank and set it aside. Two person lift required.
5. Lift your new Tank and align it with the feet pockets on the Tank you are stacking it on. (Be sure it is facing the same direction as the Tank below it)
6. Follow steps 2-7 in the section above.

Pairing the Tank PRO 4000 with the Yeti PRO 4000

1. Ensure Tank PRO 4000 power switch is OFF.

2. Plug the Tank into the Yeti (See page previous section for instructions on how to plug in QS10).

3. Switch the Tank power switch to ON.

4. Observe the Tank icon on the Yeti display.

   • The Tank icon on the Yeti will appear when the Yeti detects a Tank.

5. Observe the Status light blinking on the Tank PRO. This indicates the Tank is equalizing with the Yeti.

   • If blinking, the Status light indicates the batteries are equalizing.
   • When the Status light stops blinking and remains on, this indicates that the Tank and Yeti power stack is ready for use and will function as one unit.C
     NOTE : It may take up to 12 hours for Tanks to equalize with the Yeti depending on how many units you have connected.

6. If adding additional Tank PRO 4000 units to your power stack, ensure the power button is turned off. Then plug the additional Tank into the previously connected Tank. Once connected, you can turn the power on.

Using Your Product

Power On/Off
Press the power button on the Yeti PRO 4000. Move the power switch on the Tank PRO 4000 into the ON position. The LED Battery lights on the front face of the device will be illuminated when powered.

Charging the Tank PRO 4000
The Tank PRO 4000 will charge when it is hooked up to the Yeti PRO 4000, either through electrical grid power or solar, depending on what you’re using to charge the Yeti PRO 4000. When you connect one or more Tank PRO 4000 expansion batteries to a Yeti PRO, the Tanks and Yeti will first equalize. While the units are equalizing, the Yeti display will show charge state of the unit with the highest charge. Once equalization has finished, the units will all function as one battery and the charge state shown on the display will reflect the charge of the entire power stack.

Storage and Maintenance
Store your Tank PRO 4000 in a climate-controlled, dry location. Be sure to turn the power switch off before storing. If you can’t keep your expansion battery plugged into a power source during storage, charge the unit once every 12-18 months. Failure to maintain your Tank PRO 4000 by following these steps can result in battery damage which will void the product warranty.

Technical Specifications

Battery:

• Cell Chemistry: LiFePO4 (Lithium Iron Phosphate)
• Pack Capacity: 3993.6Wh (51.2V 78Ah)
• Lifecycles: 4000 (0.5C discharge, climate controlled, 80% original capacity.)
• Shelf-life: Charge every 12-18 months (in “main power off” state)

General:

• Chainable : Yes (Up to four units)
• Simultaneous charge and discharge: Yes
• SKU : 23110
• Weight : 80.25 lbs (36.4 kg)
• Dimensions : 21.4 x 13.8 x 9.2 in (54.36 x 35.05 x 23.3 cm)
• Operating Usage Temp :
  • Charge : 32° to 125.6°F (0° to 52°C)
  • Discharge : -4° to 140°F (-20° to 60°C)
• Certs : UL1642
  • WARNING : Cancer, Reproductive Harm  www.P65Warnings.ca.gov.
• Limited Warranty: 5 years

For warranty terms, conditions, and registration go to www.goalzero.com/warranty To request a physical copy of the warranty call 1-888-794-6250.

Troubleshooting

If the ERROR LED light is blinking, refer to your Yeti power station and/or the Goal Zero App for details.

Potential causes of blinking LED light ERROR:

• Failure to pair with the Yeti PRO 4000 power station
• Over temperature: The Tank PRO 4000 is too hot to operate
• Under temperature: The Tank PRO 4000 is too cold to operate
• Humidity sensor: It may be too humid to operate the Tank PRO 4000 safely

Function Button
The Function Button on the back of your Tank PRO 4000 is used for troubleshooting if connectivity issues arise. Please contact the Goal Zero Solutions Center for assistance. (1-888-794-6250)

Frequently Asked Questions

How long will a Tank battery last?
The Tank PRO 4000 is built to last for 4000+ cycles.0.5C discharge, climate controlled, 80% original capacity.

How long does it take to fully charge a Tank battery?
Charging time depends on several factors, including the system size and type of power input.

CHARGING TIMES

FOR 1 TANK PRO 4000 CONNECTED TO A YETI PRO 4000
FASTEST CHARGE TIME, LOW POWER PV (SOLAR)| < 24 HOURS
FASTEST CHARGE TIME, HIGH POWER PV (SOLAR)| < 2 HOURS AT 3KW OF INPUT
FASTEST CHARGE TIME, AC INPUT (FAST CHARGE)| < 4 HOURS

Can I replace the Tank PRO 4000 Lithium Iron Phosphate battery?
No

GOAL ZERO HEADQUARTERS Draper, UT 84020 1-888-794-6250 Designed in the U.S.A.

Made in China

Goal Zero Yeti is a trademark of Goal Zero. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

GOALZERO.COM

References

• P65Warnings.ca.gov
• Used Household Batteries | US EPA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>