Lite Brite B1o62QMU-gL Stranger Things Special Edition Instructions
- June 12, 2024
- Lite Brite
Table of Contents
Lite Brite B1o62QMU-gL Stranger Things Special Edition
Product Information
The Lite Brite – Stranger Things (Walmart) is a creative toy that allows you to create illuminated artwork by inserting colored pegs through a paper template. It is manufactured by Basic Fun, Inc. and made in China. The product is designed to comply with Part 15 of the FCC Rules, ensuring it does not cause harmful interference and accepts any interference received.
Warning: Battery Safety Information
- Do not dispose of batteries in fire. Batteries may explode or leak.
- A build-up of static electricity may cause the figure to stop working. If this happens, re-install batteries to reset the toy
- In an environment with radio frequency interference, the product may malfunction. If this happens, re-install batteries to reset the toy.
Warning: Changes or Modifications
Any changes or modifications to the unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Art Guide
The letters on the paper template indicate which color peg to insert through the paper and into the holes of the peg screen. The front side of the paper template is A4 size, while the back side is also A4 size.
Template Art Guide
Follow the provided templates to create more fun designs with your Lite Brite – Stranger Things.
To Install Batteries:
- Using a Phillips/cross head screwdriver (not included), loosen the screws on the battery compartment cover (screws stay attachedto cover.) Remove the cover.
- Insert 3 x 1.5V AA or R6 size batteries. Alkaline batteries are recommended. Replace the cover and tighten the screws.
Using Lite-Brite Light Modes:
- After turning on the unit, toggle the power button again to access different lite modes and light up your art with 4 color-changing patterns!
- The first press is Power On/white light, the second press is alternating flash, the third press is all-flash, and the fourth press is a rotating flash.
Artwork Examples:
- Hellfire Club
- Retro Bunny
- Demogorgon
- Demogorgon Hunters
- Waffle
- Stranger Things
- RUNLights
- Walkie Talkie
- Walkman Cassette Player
- Tigers Basketball
- Hawkins High Tiger
- Dustin’s Cap
Please keep these instructions for future reference as they contain important information pertaining to this item.
TO INSTALL BATTERIES
- Using a Phillips/cross head screwdriver (not included), loosen the screws on the battery compartment cover (screws stay attached to the cover.) Remove the cover.
- Insert 3 x 1.5V “AA” or R6 size batteries. Alkaline batteries are recommended. Replace the cover and tighten the screws.
USING LITE-BRITE LIGHT MODES
- After turning on the unit, toggle the power button again to access the different lite modes to light up your art with 4 color-changing patterns!
- The first press is Power On/white light; 2nd press is alternating flash, 3rd is all-flash; and 4th press is a rotating flash.
TEMPLATE ART GUIDE
Follow these templates to create more fun designs!
WARNING
BATTERY SAFETY INFORMATION
In exceptional circumstances, batteries may leak fluids that can cause a
chemical burn
injury or ruin your product. To avoid battery leakage:
Do not use rechargeable batteries.
- Do not attempt to recharge non-rechargeable batteries.
- Do not mix alkaline, standard (carbon-zinc), and/or rechargeable (nickel-cadmium) batteries.
- Do not mix old and new batteries.
- Only use batteries or the same or equivalent type as recommended.
- Insert batteries with the correct polarity.
- Remove exhausted batteries from the product.
- Do not short-circuit the supply terminals.
- Dispose of batteries safety.
- Do not dispose of batteries in fire. Batteries may explode or leak.
- Sometimes a build-up of static electricity (from carpets, etc.) may cause the figure to stop working. If this happens, re-install batteries to reset the toy.
- In an environment with radio frequency interference, the product may malfunction. If this happens, re-install batteries to reset the toy.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference and (2) this device must accept any interference received,
including interference that may cause undesired operation.
WARNING: Changes or modifications to this unit not expressly approved by
the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try and correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and receiver.
-
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-
Consult the dealer or an experienced radio TV technician for help.
Please keep these instructions for future reference as they contain important information pertaining to this item. -
LITE BRITE is a trademark of Hasbro and is used with permission.
-
©2021Hasbro.
-
All Rights Reserved.
-
Manufactured by Basic Fun, Inc.
-
Boca Raton, FL 33431, USA MADE IN CHINA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>