TARAMPS T0302 Player Automotive Sound Desk Instruction Manual

TARAMPS T0302 Player Automotive Sound Desk

Product Information

This product is a MESA DE SOM AUTOMOTIVO, designed for use in automotive settings. It is manufactured by Taramps Electronics and has the following contact information:
Website: www.taramps.com.br
Department: Taramps Electronics
Address: CEP: 19.180-000
Phone numbers: (18) 3266-4050 / 99749-3391
Email: assistencia8@taramps.com.br

The product features multiple inputs and controls, as well as a remote function. It operates on a 12V power supply with a current of 350mA. The frequency range supported by the product is 2Hz to 76Khz.

Product Usage Instructions

Power Connection:

• Connect the positive pole of the power supply (12V battery) to the POWER input.
• Connect the negative pole of the power supply (12V battery) to the GND input. 2. Power On/Off:
• Press the ON/OFF button to turn on the device.
• Press the ON/OFF button again to turn off the device.

Remote Function:

• Connect the REMOTE IN cable to the positive pole of the 12V battery.
• Connect the REMOTE OUT cable to the negative pole of the 12V battery.
• Press the REMOTE IN button to turn on the device independently of the REMOTE IN signal being active.
• The device will only turn on if the REMOTE IN signal is activated. 4. Inputs:
• The device has multiple input options: a) MIC / LINE 1 (Microphone or Line level 1) b) LINE 2 c) LINE 3 5.

Controls:

• The device features various controls for adjusting the audio: a) These controls are not specified in the provided text extract. 6. Microphone, CD/DVD Player, Amplifiers:
• The device can be connected to a microphone, CD/DVD player, and two amplifiers.
• Connect the respective devices to the corresponding input/output ports.
  Please refer to the complete user manual for detailed information on control functions and additional features.

The installation of this product must be made by a qualified professional

Term of warranty

TARAMPS, located on Abilio Daguano Street 274, Res. Manoel Martins – Alfredo Marcondes, SP – Brazil, ZIP CODE 19180-000, guarantees this product against any defects on terms of project, making, assembling, and/or with solidarity, due to project vices which cause it improper or inadequate to its original use within 12 months from the date of purchase. In case of a defect during the warranty period, TARAMPS’ responsibility is limited to the repairing or substitution of the device of its own making.

This warranty excludes:

• Damaged products by improper installation, water infiltration, and violation by unauthorized individuals;
• Tamper or torn warranty seal;
• Cases in which the product is not used in adequate conditions;
• Defects caused by accessories, modifications or features attached to the product;
• The product with damage from falling, bumps or nature-related problems (flooding, lightning, etc.);
• Warranty card is not properly filled or torn;
• Costs involving uninstallation, reinstallation of equipment as well as shipment to the factory
• Damage of any kind, due to problems in the product, as well as losses caused by discontinued use of the product.

Technical assistance

For international support, check on our website:
www.taramps.com.br or contact direct factory support:
Phones: +55 18 3266-4050 / +55 18 99749-3391
E-mail: service@taramps.com.br

Introduction

Read this manual before installing the product. In case of questions contact our technical support: +55 (18) 3266-4050 or www.taramps.com.br.

At the end of its lifespan, this product must not be disposed of in household waste. Look for an electronic equipment collection or recycling center for proper disposal

Safety requirements

To ensure proper use, please read through this manual before using the processor. It is especially important that you know the CAUTIONS contained here.

• The installation of this product must be done by a qualified professional.
• Use the correct tools for installing this product.
• This product is for use with 12V batteries. Always check the voltage before installing.
• Never install the product in places exposed to dust, humidity, and water. Pay attention to installing it far from the fuel tank, fuel lines, heat sources, and other parts of the vehicle.
• Be sure to install a protection fuse or a circuit breaker near to battery. Follow the ampere rating as indicated here in this manual. Use of an improper fuse or circuit breaker could result in overheating, smoke, damage to the product, injury or burns.
• Avoid running wires over or through sharp edges. Use rubber or plastic grommets to protect any wires routed through the car’s body.
• Automotive sound systems may produce high sound pressure levels. Avoid continuous exposure to levels over 85dB to prevent permanent hearing loss.

Safety

• As you read this manual, pay attention to the safety symbols.

CAUTION
This symbol with “CAUTION” is intended to alert the user to the presence of important instructions. Failure to heed the instructions will result in a risk of injury to the user or product damage
Taramps reserves the right to modify the contents of this document at any time without prior notice and does not have the obligation to apply the changes in units that were previously produced.

Presentation

• The T 0302 mixer was designed for sound systems allowing the mixing of several types of audio signals with high indelity, ensuring the original dynamics of the sound. It features a 4-band equalizer that allows you to increase or reduce specific ranges of mid-bass and highs, allowing for professional control in any situation. Its outputs with timed MUTE avoid undesired noises (Pops) when turned on or off, making the sequence of activations unnecessary, and easing installation.
• The T 0302 features 3 input channels, CHANNEL 1 is balanced with two shared connections, one XLR and one RTS. This is a high-sensitivity, wide-gain input, which allows the use of a Microphone or LINE IN.
• CHANNELS 2 and 3 feature shared L+R type RCA inputs with an RTS connector for greater connection flexibility.

All 3 inputs have independent controls for:

• Gain for adjusting the input signal level.
• 4 EQ controls HIGH, MID HIGH. MID LOW and LOW with ±15dB boost/attenuation.
• Level for output control.

The 2 outputs have great amplitude and can deliver up to +18dBu or 6.3Vac of distortion-free signal.

Important recommendations Use the P4 adapter with terminal that comes with the product to connect the power wires to the vehicle’s 12V battery. Use 1.5mm² gauge wires for both the positive and negative wires. Screw the wires according to the following instruction:

1. Borne on the battery positive
2.  Borne on the battery negative.

As protection, a fuse must be installed close to the positive pole of the battery (1A fuse). check for more details on pag. 16 of this manual. For the REMOTE connection, use 0.5 mm² wire.

• The sound mixer must be fixed in an easily accessible and ventilated place. It is not recommended to install the product on the sides of speakers, as vibrations can damage their internal components.
• In order to avoid noise caption, use good quality shielded signal cables and connectors.

CAUTION

• Check power polarity and recommended gauge.
• it is recommended to install a 1 Ampere fuse on the positive supply terminal.

Product Overview

• On this page you have an overview of the T 0302 sound mixer, you will better understand the commands on the next page. To be able to use all the product commands, carefully read all the commands below.
• Install the mixer in an easily accessible place and, if fixing is necessary, use the 4 screwing holes to avoid possible vibrations.

Connections

MIC / LINE 1

• Balanced inputs for XLR (Canon) and TRS connectors. ATTENTION: these inputs DO NOT HAVE PHANTON POWER.

LINE 2 3

• Unbalanced inputs Inputs for RCA or (TRS 1/4”) connector. They allow you to receive signals from several types of sound gear such as CD/DVD/MP3 player, audio processors, etc… with high-level outputs.

AUX OUT

• It features an RCA connector in parallel with a connector for TRS. This output mixes all input signals, including L and R.
• This output features a phase inversion button and independent level control, but it also responds to the MAIN LEVEL control.

MAIN OUT

• It features an RCA connector in parallel with a connector for TRS.
• This output mixes all input channels, including R and L.

Functions

Controls

Installation Power and activation

• The T 0302 was designed to be used in car audio systems with a 12V battery, but it can also be used with an external 12V plug adapter with a current of at least 2A, which must be purchased separately (in this case, the consumer should pay attention to the adapter plug that should be standard P4-2mm) . It has an ON/OFF button that eliminates the REMOTE IN connections.
• It can automatically turn on and off by remote activation using the REMOTE IN connection. To do so, keep the ON/OFF key off (unpressed).
• The REMOTE OUT connection can be used for powering amplifiers and is timed to minimize transients when turning the system on and off.

REMOTE IN 1

• Connection that turns on or off automatically from a remote cable from a CD/DVD player. Use 0.5 mm² cable.
  Note : if the ON/OFF button is pressed, the device will not turn off by remote activation.

REMOTE OUT 2

• Output for activating other devices. It can be used to turn on amplifiers or other equipment as long as they have a remote input. This output is current-limited and not suitable for currents greater than 350mA.
• Use 0.5 mm² or higher gauge cables.

12V POWER SUPPLY 3

• Standard P4 /12V 2mm power connector. Use the TERMINAL/P4 adapter that comes with the product or a 12V adapter source (the adapter source doesn’t come with the product).
• Use a 0.75mm² cable for the connections and use a 1A fuse on the positive wire as close as possible to the battery, following the marking on the TERMINAL/P4 adapter:
  • + to the battery’s 12V positive terminal.
  • –  to the battery’s negative terminal

CAUTION

• Check power polarity and recommended gauge.
• it is recommended to install a 1 Ampere fuse on the positive supply terminal.

POWER ON/OFF 4

• Turns on the sound mixer regardless of the REMOTE IN signal when pressed.
• If the REMOTE IN input is active (remote on) this button will not turn off the device until the REMOTE IN input is deactivated.

Connection examples

Technical features

Taramps reserves the right to modify the content of this manual without prior notice and without any obligation to apply the modifications to previously produced units.
+55 18 3266-4050

Manufactured by:
TARAMPS ELECTRONICS LTDA
CNPJ / TAX ID: 11.273.485/0001-03
R. João Silvério, 121 • Res. Manoel Martins
Alfredo Marcondes – SP
Indústria Brasileira – Made in Brazil
www.taramps.com.br

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>