Saramonic B1 Blink800 5.8GHz Wireless Microphone System User Manual

Saramonic B1 Blink800 5.8GHz Wireless Microphone System

General Introduction

The Saramonic Blink800 is a versatile and easy-to-use 5.8 GHz wireless microphone system that delivers detailed, broadcast-quality sound. There are three kinds of kits available in the Blink800 system, including B1 (TX-35+ RX-35), Blink800 B2 (TX-XLR+RX-XLR), and Blink800 B3 (TX-635+RX-635). Kit components are all constructed of durable metal and fully compatible with other Blink800 wireless system components for added system expand- ability.

Package Available

Introduction

The Saramoni c Bli nk800 B1 is a 5.8 GHz durable metal wireless lavalier microphone system that delivers detailed, crystal clear sound. With the 3.5mm TRS audio output cable, it is compatible with DSLRs, mirrorless cameras, camcorders, recorders, and more. The Blink800 system is designed to automatically avoid interference for hassle-free and reliable sound performance.

Product Structure

3.5mm input transmitter Blink800 TX-35

1. Power and Pairing Indicator
   Power Functions:
   Solid Red Light=Low Battery
   Pairing Functions:
   Flashing Blue Light (every 1 second)=Unpaired Ouick Flashi ng Blue Light (every 0.5 second)=Waiting for Pairing Solid Blue Light= Paired Successfully
   Note: If the transmission signal is poor, please follow the steps below to select a different channel until you get a dear sound.
   Quickly press the power button of TX-35 to select the channel. Once the receiver and transmitter are paired, they will be connected automatically on the same channel, even when powered off and on.
   (Red light flashing once= Channel 1, Red light flashing twice•Channel 2, Red light flashing three times•Channel 3, Red light flashing four times=Channel 4)

2. Pair Button

3. Power Button
   Long press to turn on or off the transmitter.

4. MIC IN jack (3.5mm TRS locking input jack)

5. USB Type-C Charging Port

6. Charge Indicator
   Solid Red Light=Charging
   Light turns off= Fully Charged

7. Built-in Antenna
   Note: Be careful to avoid violent collisions to antenna.

3.5mm output receiver Blink800 RX-35

1. Power and Pairing Indicator
   Power Functions:
   Solid Red Light=Low Battery
   Pairing Functions:
   Flashing Blue Light (every 1 second)=Unpaired Quick Flashing Blue Light (every 0.5 second)=Waiting for Pairing
   Solid Blue Light=Paired Successfully Once the receiver and transmitter are paired, they will be connected with each other automatically, even when powered off and on.

2. Pair Button

3. Power Button
   Long press to turn on or off the receiver.

4. OUTPUT jack (3.5mm TRS locking output jack)

5. USB Type-C Charging Port

6. Charge Indicator
   Solid Red Light=Charging
   Light turns off = Fully Charged

7. Built-In Antenna
   Note: Be careful to avoid violent collisions to antenna.

Quick Setup Guide (Blink800 B1)

Attach the belt clip to the TX-35

1. Press the TX-35 down fitting into the horizontal groove on the belt clip.
2. Attach the TX-35 into the place according to the shown icon of groove.
   Please repeat the above steps for attaching the adapter to RX-35.

Connect the supplied lava lier microphone to the MIC IN jack of TX-35

1. Plug the supplied lavalier microphone into the MIC IN jack.
2. For a secure connection, turn to lock the connector.

Attach the shoe mount to the RX-35

1. Push the RX-35 downfitting into the horizontal groove on the cold shoe mount.

2. Slide the RX-35’s cold shoe mount onto camera’s shoe mount.

3. Plug the supplied 3.5mm TRS to TRS output cable into the OUTPUT jack of RX-35 and then into camera’s mic input.
   Note: Please make sure the transmitter and receiver pairing has been completed.

Introduction

The Saramoni c Bli nk800 B2 is a 5.8GHz durable metal wireless microphone system for delivering detailed, crystal clear sound during recording. With the XLR input connector, it is compatible with instruments, dynamic & self-powered microphone, and other XLR devices. It is fully compatible with other Blink800 wireless system components for added system expandability.

Product Structure

XLR input transmitter Blink800 TX-XLR

1. Power and Pairing Indicator
   Power Functions:
   Solid Red Light=Low Battery

Pairing Functions:
Flashing Blue Light (every 1 second)=Unpaired
Quick Flashing Blue Light (every 0.5 second)=Waiting for Pairing
Solid Blue Light=Paired Successfully
Once the receiver and transmitter are paired, they will be connected with each other automatically, even when powered off and on.

Note: If the transmission signal is poor, please follow the steps below to select a different channel until you get a clear sound.
Quickly press the power button of TX-XLR to select the channel. Once the receiver and transmitter are paired, they will be connected automatically on the same channel, even when powered off and on. (Red light flashing once=Channel 1, Red light flashing
twice=Channel 2, Red light flashing three times=Chan­nel 3, Red light flashing four times=Channel 4)

2. Pair Button

3. Power Button
   Long press to turn on or off the transmitter.

4. XLR input connector

5. USB Type-C Charging Port

6. Charge Indicator
   Solid Red Light=Charging
   Light turns off= Fully Charged

7. Built-in Antenna
   Note: Be careful to avoid violent collisions to antenna.

XLR output receiver Blink800 RX-XLR

1. Power and Pairing Indicator

   • Power Functions:
     Solid Red Light=Low Battery

   • Pairing Functions:
     Flashing Blue Light (every 1 second)=Unpaired Quick Flashing Blue Light (every 0.5 second)=Waiting for Pairing Solid Blue Light=Paired Successfully
     Once the receiver and transmitter are paired, they will be connected with each other automatically, even when powered off and on.

2. Pair Button

3. Power Button
   Long press to turn on or off the receiver.

4. XLR output connector

5. USB Type-C Charging Port

6. Charge Indicator
   Solid Red Light=Charging Light turns off = Fully Charged

7. Built-In Antenna
   Note: Be careful to avoid violent collisions to antenna.

Quick Setup Guide (Blink800 B2)

1. Attach the Blink800 TX-XLR transmitter to dynamic microphone, self-powered microphone, or other XLR audio output device.
   Pushing in the microphone or XLR male audio output into the XLR female input of Blink800 TX-XLR until it clicks into place.
   Note: Please turn off the transmitter before attaching or removing the microphone.

2. Attach the Blink800 RX-XLR receiver to the video camera, mixer, recorder, or other XLR input device.
   Note: Please make sure the transmitter and receiver pairing has been completed.

Blink800 B3 (TX-635+RX-635)

Introduction
The Saramonic Blink800 B3 is a 5.8GHz durable metal wireless guitar and instrument system that delivers detailed, crystal clear sound. With the 6.35mm audio input and output connectors, it wirelessly transmits guitars, keyboards and other instruments to amplifiers, pedalboards, mixers and more. It is fully compatible with other Blink800 wireless system components for added system expandability.

Product Structure
6.35mm input transmitter BlinkB00 TX-635

1. Power and Pairing Indicator
   Power Functions:
   Solid Red Light=Low Battery
   
   Pairing Functions:
   Flashing Blue Light (every 1 second)=Unpaired
   Quick Flashing Blue Light (every 0.5 second)=Waiting for Paring
   Solid Blue Light=Paired Successfully
   Once the receiver and transmitter are paired, they will be connected with each other automatically, even when powered off and on.
   Note: If the transmission signal is poor, please follow the steps below to select a different channel until you get a clear sound.
   Quickly press the power button of TX-635 to select the channel. Once the receiver and transmitter are paired, they will be connected automatically on the same channel, even when powered off and on. (Red light flashing once=Channel 1, Red light flashing
   twice=Channel 2, Red light flashing three times=Chan­nel 3, Red light flashing four times=Channel 4)

2. Pair Button

3. Power Button
   Long press to turn on or off the transmitter.

4. 6.35mm input connector

5. USB Type-C Charging Port

6. Charge Indicator
   Solid Red Light=Charging Light turns off= Fully Charged

7. Built-in Antenna
   Note: Be careful to avoid violent collisions to antenna.

6.35mm output receiver Blink800 RX-635

1. Power and Pairing Indicator

   • Power Functions:
     Solid Red Light=Low Battery

   • Pairing Functions:
     Flashing Blue Light (every 1 second)=Unpaired Quick Flashing Blue Light (every 0.5 second)=Waiting for Pairing
     Solid Blue Light=Paired Successfully
     Once the receiver and transmitter are paired, they will be connected with each other automatically, even when powered off and on.

2. Pair ButtoN

3. Power Button
   Long press to turn on or off the receiver .

4. 6.35mm output connector

5. USB Type-C Charging Port

6. Charge Indicator
   Solid Red Light=Charging Light turns off= Fully Charged

7. Built-In Antenna
   Note: Be careful to avoid violent collisions to antenna.

Quick Setup Guide (Blink800 B3)

1. Attach the Blink800 TX-635 transmitter to instrument, or any 6.35mm output device.
2. Attach the Blink800 RX-635 receiver to the mixer, recorder, pedal board, guitar amplifier etc.

Note: Please make sure the transmitter and receiver pairing has been completed.

Operation Guide

For the Blink800 B1 kit

1. Turn on the TX-35 transmitter and RX-35 receiver.

2. The transmitter and receiver have been paird success­fully before leaving the factory.
   Note: If the transmitter and receiver are disconnected, please follow the steps below to connect them manually. Press the pair button of receiver and transmitter simultane­ously and hold for 3 seconds, the indicators of receiver and transmitter will flash quickly at every’ 0.5 seconds waiting for pairing.

3. When pairing succeeds, the indicators of transmitter and receiver are solid blue.
   Note:

4. To pair a second receiver RX, just repeat the step 2.
   (Receivers only can receive one transmitte r at a time. Transmitters can transmit to up to 4 receivers simultaneously.)

5. If the transmission signal is poor, please follow the steps below to select a different channel until you get a clear sound. Quickly press the power button of TX-35 to select the channel. Once the receiver and transmitter are paired, they will be connected automatically on the same channel, even when powered off and on.
   (Red light flashing once= Channel 1, Red light flashing twice= Channel 2, Red light flashing three times= Channel 3, Red light flashing four times= Channel

6. Connect the supplied lavalier to the MIC IN jack of TX-35 transmitter.

7. Connect the RX-35 receiver to the mic-in jack of a camera, camcorder, recorder with the supplied 3.5mm TRS audio cable.

8. You are ready to record.

For the Blink800 B2 kit

1. Turn on the TX-XLR transmitter and RX-XLR receiver.

2. The transmitter and receiver have been paird success­fully before leaving the factory.
   Note: If the transmitter and receiver are disconnected, please follow the steps below to connect them manually. Press the pair button of receiver and transmitter simultane­ously and hold for 3 seconds, the indicators of receiver and transmitter will flash quickly at every’ 0.5 seconds waiting for pairing.

3. When pairing succeeds, the indicators of transmitter and receiver are solid blue.
   Note:

4. To pair a second receiver RX, just repeat the step 2.
   (Receivers only can receive one transmitter at a time. Transmitters can transmit to up to 4 receivers simultaneously).

5. If the transmission signal is poor, please follow the steps below to select a different channel until you get a clear sound. Quickly press the power button of TX-XLR to select the channel. Once the receiver and transmitter are paired, they will be connected automatically on the same channel, even when powered off and on.
   (Red light flashing once=Channel 1, Red light flashing twice=Channel 2, Red light flashing three times=Channel 3, Red light flashing four times=Channel

For the Blink800 B3 kit

1. Turn on the TX-635 transmitter and RX-635 receiver.

2. The transmitter and receiver have been paird success­fully before leaving the factory.
   Note: If the transmitter and receiver are disconnected, please follow the steps below to connect them manually. Press the pair button of receiver and transmitter simultane­ously and hold for 3 seconds, the indicators of receiver and transmitter will flash quickly at eve,y 0.5 seconds waiting for pairing.

3. When pairing succeeds, the indicators of transmitter and receiver are solid blue.
   Note:

4. To pair a second receiver RX, just repeat the step 2.
   (Receivers only can receive one transmitter at a time. Transmitters can transmit to up to 4 receivers simultane ously).

5. If the transmission signal is poor, please follow the steps below to select a different channel until you get a clear sound. Quickly press the power button of TX-635 to select the channel. Once the receiver and transmitter are paired, they will be connected automatically on the same channel, even when powered off and on.
   (Red light flashing once=Channel 1, Red light flashing twice=Channel 2, Red light flashing three times=Channel 3, Red light flashing four times=Channel

6. Attach the Blink800 TX-635 transmitter to instrument, or any 6.35mm output device.

7. Attach the Blink800 RX-635 receiver to the mixer, recorder, pedal board, guitar amplifier etc.

8. You are ready to record.

Specification

Packing list

• Blink800 RX-35
  • 1 xBlink800 RX-35 Receiver
  • 1 x Detachable Cold Shoe Adapter for RX-35
  • 1 x3.5mm TRS to TRS Output Cable for Camera
  • 1 x 1′ (30.5cm) USB-C to USB-A Charging Cable
  • 1 xWarranty Card
  • 1 xUser Manual
• Blink800 TX-35
  • 1 x Blink800 TX-35 Transmitter
  • 1 xDK3A Omnidirectional Lavalier Microphone
  • 1 x Plastic Belt-Clip Mounting Plate for TX-35
  • 1 x 1′ (30.5cm) USB-C to USB-A Charging Cable
  • 1 xWarranty Card
  • 1 xUser Manual
• Blink800 RX-XLR
  • 1 xBlink800 RX-XLR Receiver
  • 1 x 1′ (30.5cm) USB-C to USB-A Charging Cable
  • 1 x 1.1′ (35cm)XLR Cable
  • 1 xWarranty Card
  • 1 xUser Manual
• Blink800 TX-XLR
  • 1 x Blink800 TX-XLR Transmitter
  • 1 x 1′ (30.5cm) USB-C to USB-A Charging Cable
  • 1 x 1.1′ (35cm)XLR Cable
  • 1 xWarranty Card
  • 1 xUser Manual
• Blink800 RX-635
  • 1 xBlink800 RX-635 Receiver
  • 1 x 1′ (30.5cm) USB-C to USB-A Charging Cable
  • 1 xWarranty Card
  • 1 xUser Manual
• Blink800 TX-635
  • 1 x Blink800 TX-635 Transmitter
  • 1 x 1′ (30.5cm) USB-C to USB-A Charging Cable
  • 1 x2′(60cm) 6.35mm extension cable
  • 1 xWarranty Card
  • 1 xUser Manual
• Blink800 B1 (TX-35+RX-35)
  • 1 xBlink800 RX-35 Receiver
  • 1 x Blink800 TX-35 Transmitter
  • 1 x Detachable Cold Shoe Adapter for RX-35
  • 1 x Plastic Belt-Clip Mounting Plate for TX-35
  • 1 xDK3A Omnidirectional Lavalier Microphone
  • 1 x 3.5mm TRS to TRS Output Cable for Camera
  • 2×1′ (30.5cm) USB-C to USB-A Charging Cable
  • 1 xWarranty Card
  • 1 xUser Manual
• Blink800 B2 (TX-XLR+RX-XLR)
  • 1 xBlink800 RX-XLR Receiver
  • 1 x Blink800 TX-XLR Transmitter
  • 2x 1′ (30.5cm) USB-C to USB-A Charging Cable
  • 2x 1.1′ (35cm)XLR Cable
  • 1 xWarranty Card
  • 1 xUser Manual
• Blink800 B3 (TX-635+RX-635)
  • 1 xBlink800 RX-635 Receiver
  • 1 x Blink800 TX-635 Transmitter
  • 1 x2′(60cm) 6.35mm extension cable
  • 2x 1′ (30.5cm) USB-C to USB-A Charging Cable
  • 1 xWarranty Card
  • 1 xUser Manual

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>