SEAGATE PS5 NVMe SSD Game Drive Installation Guide
- June 13, 2024
- Seagate
Table of Contents
SEAGATE PS5 NVMe SSD Game Drive
Product Information
Model: Game Drive PS5 NVMe SSD
- The Game Drive PS5 NVMe SSD is an external storage device designed specifically for use with the PS5 console. It provides additional storage space for games, apps, and media, allowing users to expand the storage capacity of their console.
- Before installing the Game Drive PS5 NVMe SSD, it is important to ensure that your PS5 console’s system software is up to date. Additionally, it is recommended to remove all cables and devices from the console and allow it to cool down before proceeding with the installation.
- If you are using the Game Drive PS5 NVMe SSD for the first time, you will need to format it after installation. This formatting process will erase any saved data on the drive, so it is essential to back up any important data before proceeding.
Product Usage Instructions
- Step 1 – Turn off your console:
- Remove all cables and devices connected to your console.
- Allow the console to cool down.
- Place the console on a flat surface with a clean protective covering.
- Step 2 – Remove the console cover:
- Grip the bottom-right and top-left corners of the cover.
- Gently lift the right side of the cover.
- Slide the cover off to the left.
- Step 3 – Remove the expansion slot cover:
- Locate the rectangular expansion slot cover.
- Remove the screw and then remove the cover.
- Step 4 – Remove the SSD screw:
- Carefully remove the SSD screw in the slot and lift up the spacer.
- Move the spacer to the groove marked 80.
- Step 5 – Insert Game Drive PS5 SSD:
- Carefully insert the Game Drive PS5 NVMe SSD into the expansion connector until it is firmly seated in the slot.
- Ensure that the SSD is inserted all the way into the expansion connector before proceeding.
- Step 6 – Fasten Game Drive PS5 SSD:
- Ensure that the Game Drive PS5 NVMe SSD is flush with the spacer.
- Fasten the SSD to the spacer with the SSD screw.
- Step 7 – Attach expansion slot cover:
- Attach the expansion slot cover and fasten the screw.
- Step 8 – Replace console cover:
- Position the cover slightly away from the top edge of the console and slide it back into place.
- You’ll hear a click when the cover is secured.
- Step 9 – Reconnect:
- Reattach the base and connect the AC power cord and cables.
- Turn on the power. If your Game Drive PS5 NVMe SSD has never been used on a console, you should see instructions for formatting it.
Introduction
Product information
- Intended for PlayStation 5 consoles.
- Game Drive PS5 NVMe SSD’s heatsink is pre-installed. Removing it may damage Game Drive PS5 NVMe SSD.
- Dimensions of Game Drive PS5 NVMe SSD are 80.15 mm (L) x 24.22 mm (W) x 11.10 mm (H). Verify that your system provides enough space for installation.
Before installing
- Make sure your system software is up to date.
- Press and hold the power button for three seconds to turn off your PS5 console.
- Remove all cables and devices from your PS5 console and wait for it to cool down.
- Touch a metal-grounded object to remove any static electricity from your body. Failure to do so may damage Game Drive PS5 NVMe SSD or your PS5 console.
- Do not power on or play on your console while the cover is off.
If you have not used Game Drive PS5 NVMe SSD before, you will need to format it after completing the installation. Formatting Game Drive PS5 NVMe SSD will erase any saved data on the drive. Make sure you’ve backed up any important data on the drive before installing.
Equipment
To install Game Drive PS5 NVMe SSD, you will need:
- A well-lit room with a clean table to work on.
- A #1 Phillips (cross-head) screwdriver.
- A small flashlight (optional)
Installing Game Drive
-
Step 1 – Turn off your console
- Remove all cables and devices connected to your console. Wait a while for your console to cool down.
- Place your console on a flat surface with a clean protective covering. Remove the base and position the console so that the logo is facing down, with the power button facing away from you.
-
Step 2 – Remove the console cover
Grip the bottom-right and top-left corners of the cover.- A. Gently lift the right side of the cover.
- B. Slide the cover off to the left.
-
Step 3 – Remove the expansion slot cover
- Locate the rectangular expansion slot cover. Remove the screw, and then remove the cover.
-
Step 4 – Remove the SSD screw
- Carefully remove the SSD screw in the slot and lift up the spacer.
- Move the spacer to the groove marked “80”.
-
Step 5 – Insert Game Drive PS5 SSD
- Carefully insert Game Drive PS5 NVMe SSD into the expansion connector until it is firmly seated in the slot.
- Important Make sure Game Drive PS5 NVMe SSD is inserted all the way into the expansion connector before proceeding to the next step. If Game Drive PS5 NVMe SSD is incorrectly inserted it may cause damage to the terminal and your console.
-
Step 6 – Fasten Game Drive PS5 SSD
- Ensure that Game Drive PS5 NVMe SSD is flush with the spacer. Fasten the SSD to the spacer with the SSD screw.
-
Step 7 – Attach expansion slot cover
- Attach the expansion slot cover and fasten the screw.
-
Step 8 – Replace console cover
- Position the cover slightly away from the top edge of the console and slide it back into place. You’ll hear a click when the cover is secured.
-
Step 9 – Reconnect
- Reattach the base and connect the AC power cord and cables.
- Turn on the power. If your Game Drive PS5 NVMe SSD has never been used on a console, you should see instructions for formatting it.
Support & Services
Online support and services
Go to www.seagate.com/contacts.
Warranty support
Go to www.seagate.com/support/warranty-and-
replacements.
References
- The Leader in Mass Data Storage Solutions | Seagate US
- Contact Us | Seagate US
- Contact Us | Seagate US
- Contact Us | Seagate US
- Warranty & Replacements | Support Seagate US
- Warranty & Replacements | Support Seagate US
- Contact Us | Seagate US
- Product Support | Support Seagate US
- Warranty & Replacements | Support Seagate US