AGFAPHOTO Realipix Square P Photo Printer User Guide

: June 13, 2024
: AGFAPHOTO

Table of Contents

Smartphone App Installation
APPLE Device
BLUETOOTH Connection
Before Start
Printing in the App
Troubleshooting
Power and Active Status
WARRANTY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

AGFAPHOTO Realipix Square P Photo Printer User Guide

Smartphone App Installation

ANDROID
Go to GOOGLE Play Store in your smartphone.
Search “Agfaphoto Realipix”
Install “Agfaphoto Realipix”. Into your smartphone

APPLE Device

Go to APP STORE in your IPHONE, IPOD TOUCH or IPAD.
Search “Agfaphoto Realipix”
Install “Agfaphoto Realipix”. Application into your device.

BLUETOOTH Connection

Turn on BLUETOOTH in your smartphone
Turn on printer.
Go to BLUETOOTH setting in your smartphone and you can find “Agfaphoto – XXXX” (‘XXXX’ are 4 digits combination of numbers and letters.)
Select it for connection.

Before Start

This Printer has built-in battery. Charge the printer before using it.
How to Change Cartridge

Pull out or Push the cartrige with this handle.
Follow the arrow to insert the cartridge

Printing in the App

1. “Agfaphoto Realipix” app launch -> 2. “Gallery” to load your device’s photos. -> 3. Choose Photo> 4. Select Print Number -> 5. Select Printer Icon

Select SNS if you want to print the photo from it.
Note

Photo Paper will go in and out 4 times (YMCO, Yellow, Magenta, Cyan, Overcoating). Do not touch the paper during printing process for best image quality
Do not pull paper out by force during printing.
Do not place an object in front of the paper exit slot.
Use the latest application for best print quality. Check the latest app version from GOOGLE Play Store and APPLE APP STORE.
Printer has built-in battery. Charge the printer before using.
Handle with care during charging to prevent electric shock.
Do not disassemble or deform. Avoid too high or low temperature or humidity.
The higher resolution the image has, the higher quality the printed photo has. Recommended image size is 128
2448 pixel.
Operating Temperature: 0-40°C

Troubleshooting

Symptom	Cause/Solution
Paper Jam	Power off and Power On again. Paper will be automatically ejected

If not, please contact customer service.
Image quality is not good.| Print quality could be less if your photo source has low resolution.
Over 1280 x 2448 pixel is recommended for best image quality.
Printer is not responding.| Press Reset button with sharp tool like pin.

Power and Active Status

Power ON: White / Power OFF(2Sec): Off / Printing: White Flickering
F.W Upgrade: Pink Flickering / No Cartrige, Error: Red Flickering Waiting, Cooling: White
Charging: Red / Charging Complete : Green
Connecting : Green Blink / Blutooth Complete : Green

(Federal Communications Commission) FC CE This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

Notice : of compliance for the European Union Products bearing the CE mark comply with the applicable European directives and associated harmonised European standards.

Caution: Any changes or modifications to the equipment not expressly approved by the party responsible for compliance could void user’s authority to operate the equipment.
This appliance and its antenna must not be co-located or operation in conjunction with any other antenna or transmitter.
A minimum separation distance of 20cm must be maintained between the antenna and the person for this appliance to satisfy the RF exposure requirements.