Eminence 69242 LED Light Instruction Manual
- June 13, 2024
- Eminence
Table of Contents
Eminence 69242 LED Light
Product Information
- Model: Eminence LED Light
- Part Number: 69242
- Manufacturer: Unknown
- Address: 3030 Corporate Grove Dr. Hudsonville, MI 49426
- Contact Number: 616.396.1355
- Website: https://www.itc-us.com
Installation Instructions
- Determine the installation location for your light and drill a 3.5″ hole using a hole saw drill bit.
- For the screw mount version, remove the cover by twisting it counter clockwise. Mark the location of the screw and pre-drill. Using the screws provided, screw in the fixture and re-install the cover by twisting it clockwise.
- Follow the wiring diagram below for proper installation:
- For spring mount, push clips on both sides of the light up and slide housing clips up through the hole. The clips will snap down and hold the light in place.
PARTS/TOOLS NEEDED
IMPORTANT SAFETY INSTRUCTIONS
READ CAREFULLY FOR YOUR PROTECTION AND SAVE ALL INSTRUCTIONS.
- Disconnect power before installing, adding or changing any component.
- To avoid a hazard to children, account for all parts and destroy all packing materials.
- It is recommended that fuse protection be added to the positive (+) input.
INSTALLATION
- Determine the installation location for your light and drill a 3.5” hole saw drill bit.
- Follow the wiring diagram below.
- For the screw mount verison remove the cover by twisting counterclockwise. Mark location of the screw and pre-drill. Using screws provided, screw in the fixture and re-install cover by twisting clockwise.
- For spring mount, push clips on both sides of light up and slide housing clips up through the hole. Clips will snap down and hold the light in place.
3030 Corporate Grove Dr.
Hudsonville, MI 49426
Phone: 616.396.1355
itc-us.com
For warranty information please visit www.itc-us.com/warranty-return-
policy
DOC #: 710-00178 • Rev B • 06/08/2023
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>