sage BCG600 the Dose Control Pro Coffee Grinder User Guide

sage BCG600 the Dose Control Pro Coffee Grinder

Product Information

Important Safeguards:

• Allow the appliance to cool before cleaning, moving, or storing.
• Consult an electrician for professional advice if the electrical current exceeds 30mA.
• Do not immerse the power plug, cord, or appliance in water or any liquid to protect against electric shock.
• Dispose of the appliance at a designated waste collection center or through a dealer providing this service. Do not dispose of it in normal household waste.

Getting to Know Your New Appliance:

• A. Bean Hopper Lid
• B. Bean Hopper
• C. Hardened Stainless Steel Conical Burrs
• D. Grind Size Collar
• E. GRIND TIME Dial
• F. START / CANCEL Button
• G. Grind Outlet
• H. 50mm blade
• I. Grind Tray
• J. Adjustable RazorTM Dose Trimming Tool
• L. Portafilter Cradle 58mm

Operating Your New Appliance:

• Ensure the appliance is properly assembled.
• Use only whole-roasted coffee beans. Avoid grinding unroasted green and under-roasted coffee beans.
• Avoid using the appliance if the hopper is not locked into position.

Assembling Your Sage Control DoseTM Pro:

1. Insert the appropriate portafilter cradle size and place your portafilter into the cradle.
2. Align the hopper and the Grind Size Collar properly.
3. Fill the bean hopper with fresh coffee beans and secure the lid on top.

Grinding for Espresso Coffee:

• Select the desired grind amount by turning the GRIND TIME dial.
• If using the 50mm blade, adjust the dial until the 54mm blade is fully extended.
• After dosing the portafilter with ground coffee, tamp it down with 15-20kg of pressure.
• Use the Adjustable RazorTM Dose Trimming Tool to trim the puck to the right level for consistent extraction.

Note: The RazorTM has three blades of varying widths (58mm, 54mm, and 50mm). Adjust the dial to fit the diameter of your filter basket.

Additional Blade:

• If using the 50mm blade, turn the adjustment dial until the 54mm blade is fully extended.
• Insert the 50mm blade into the body and wind the Adjustable Dial until the blade is retracted past #4.
• Press the 50mm and 58mm blades simultaneously towards the center of the body until a click sound is heard.

SAGE® RECOMMENDS SAFETY FIRST

At Sage® we are very safety conscious. We design and manufacture appliances with your safety foremost in mind. In addition, we ask that you exercise a degree of care when using any electrical appliance and adhere to the following precautions.
IMPORTANT SAFEGUARDS
READ ALL INSTRUCTIONS BEFORE USE AND SAVE FOR FUTURE REFERENCE

• A downloadable version of this document is also available at sageappliances.com
• Before using the first time ensure your electricity supply is the same as shown on the label on the underside of the appliance.
• Remove and safely discard any packaging materials before first use.
• To eliminate a choking hazard for young children, safely discard the protective cover fitted to the power plug.
• This appliance is for household use only. Do not use the appliance for anything other than its intended use. Do not use in moving vehicles or boats. Do not use outdoors. Misuse may cause injury.
• Fully unwind the power cord before operating.
• Position the appliance on a stable, heat resistant, level, dry surface away from the edge and do not operate on or near a heat source such as a hot plate, oven or gas hob.
• Do not let the power cord hang over the edge of a bench or table, touch hot surfaces or become knotted.
• Do not leave the appliance unattended when in use.
• Always ensure the appliance is turned OFF, unplugged at the power outlet and has been allowed to cool before cleaning, attempting to move or storing.
• Always turn the appliance to the OFF position, switch off at the power outlet and unplug at the power outlet when the appliance is not in use.
• Do not use the appliance if the power cord, plug, or appliance becomes damaged in any way. If damaged and maintenance other than cleaning is required please contact Sage Customer Service or go to sageappliances.com
• Any maintenance other than cleaning should be performed by an authorised Sage® service centre.
• Children should not play with the appliance.
• Cleaning of the appliance should not be carried out by children unless they are 8 years or older and supervised.
• The appliance and its cord should be kept out of reach of children aged 8 years and younger.
• The installation of a residual current safety switch is recommended to provide additional safety when using all electrical appliances.
• Safety switches with a rated operating current of not more than 30mA are recommended.
• Consult an electrician for professional advice.
• Do not use attachments other than those provided with the appliance.
• Do not attempt to operate the appliance by any method other than those described in this booklet.
• Do not move the appliance whilst in operation.
• Do not touch hot surfaces. Allow the appliance to cool down before moving or cleaning any parts.
• This appliance shall not be used by children. Keep the appliance and its cord out of reach of children.
• This appliance can be used by persons with reduced physical, sensory, or mental capabilities or a lack of experience and knowledge, only if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
• Do not operate the grinder without the hopper lid in position. Keep fingers, hands, hair, clothing, and utensils away from the hopper during the operation.
• The symbol shown indicates that this appliance should not be disposed of in normal household waste.
• It should be taken to a local authority waste collection center designated for this purpose or to a dealer providing this service.
• For more information, please contact your local council office.
• To protect against electric shock, do not immerse the power plug, cord, or appliance in water or any liquid.

GETTING TO KNOW YOUR NEW APPLIANCE

• A. Bean Hopper Lid
• B. Bean Hopper
• C. Hardened Stainless Steel Conical Burrs. Removable and Adjustable Upper Burr
• D. Grind Size Collar
• E. GRIND TIME Dial
• F. START / CANCEL Button
• G. Grind Outlet
• H. 50mm blade
• I. Grind Tray
  • ACCESSORIES
• J. Adjustable Razor™ Dose Trimming Tool
• K. Portafilter Cradle 50–54mm
• L. Portafilter Cradle 58mm

OPERATING YOUR NEW APPLIANCE

BEFORE FIRST USE

• Remove and safely discard all promotional labels and packing materials attached to your Sage® appliance. Wash the hopper, and cradles in warm soapy water and dry thoroughly. Wipe the exterior of the grinder with a soft damp cloth and dry thoroughly.
• Place the grinder on a flat level surface plug the power cord into a 220-240V outlet and switch the Power ‘ON’.

ASSEMBLING YOUR SAGE CONTROL DOSE™ PRO

Bean Hopper

• Align tabs on the base of the bean hopper and insert the hopper into position. Holding the hopper, press down firmly and turn the bean hopper dial 45° to lock into position.
• A “click” sound will be heard when the hopper is properly locked in place.

Ensure the hopper and the grind-size collar are aligned properly.

• Fill with fresh coffee beans and secure the lid on top of the bean hopper.

NOTE

• If the bean hopper has not been locked into position, the GRIND TIME dial will not be illuminated.

GRINDING FOR ESPRESSO COFFEE

• This machine is designed only for whole-roasted coffee beans. Avoid grinding unroasted green and under-roasted coffee beans. These are dense and not brittle enough to run through a burr grinder.
• This will damage or break burr grinders and even pose a safety risk.
• Use single-wall filter baskets when grinding fresh coffee beans. Use the finer 1–25 settings in the ESPRESSO range.

Step 1:

• Insert the appropriate portafilter cradle size. Insert your portafilter into the cradle.

Step 2: Selecting Grind Amount

• Select the desired amount of ground coffee required by turning the GRIND TIME dial.

Step 3: Tamping the Ground Coffee

• After dosing the portafilter with freshly ground coffee, tamp down with between 15-20kg of pressure.

Step 4: Trimming the Dose

• The adjustable Razor™ Dose Trimming Tool allows you to trim the puck to the right level for a consistent extraction.
• Select the correct width blade of the Razor™ to match the diameter of your filter basket. The Razor™ has three blades of varying widths: 58mm, 54mm and 50mm. The 58mm and 54mm are already fitted within the Razor™ body. The 50mm is separate.
• If you require the 50mm blade, turn the adjustment dial past #1 until the 54mm blade is fully extended and able to be pulled from the body.
• If you require the 50mm blade, turn the Adjustable Dial past #1 until the 54mm blade is fully extended and able to be pulled from the body.

NOTE

• The Adjustable Dial may feel tight as you continue to wind it towards the end of its travel.
• Insert the 50mm blade into the body. Wind the Adjustable Dial until the blade is retracted past #4. Press the 50mm and 58mm blades at the same time, towards the centre of the body until a “click” sound can be heard.
• Adjust the Razor™ to the setting in the table below for your Sage® espresso machine. This is a starting point for your dose height.

Step 5: Select Your Grind Size

• For espresso, we recommend starting with grind size setting 15 and rotating the Hopper (to adjust the Grind Size Collar) either coarser or finer.
• If the Grind Size Collar is tight, run the grinder by pressing the START / CANCEL button while turning the Hopper. This will release coffee grounds caught between the burrs.

GRINDING INTO A GRINDS CONTAINER OR COFFEE FILTER

Step 1:

• Remove cradle by sliding out from under the grind outlet.
• Place your container or coffee filter directly under grind outlet.

Step 2:

• Select the required amount of ground coffee by rotating the GRIND TIME dial.

Step 3: Select Your Grind Size

• Rotate the Hopper to adjust the Grind Size Collar until it reaches the required brewing method range.

FEATURES OF YOUR SAGE DOSE CONTROL™ PRO Pause Function

• You can pause the grinder during operation, allowing you to collapse or settle the coffee in the Portafilter.
• Press the START / CANCEL button to start the grinding operation.
• During grinding, press the START / CANCEL button to pause the grinding operation for up to 10 seconds.
• The START / CANCEL button will slowly flash while paused.
• Press START / CANCEL again within this time to resume grinding the remaining dose. Or press and hold the START / CANCEL button for 1 second to cancel.

Manual

• Grinding manually allows you to have complete control over how much coffee is dispensed.
• Press and hold the START / CANCEL button to grind for as long as you require.
• Release the START / CANCEL button to stop grinding.

COFFEE CHART *****

Brewing Method| Espresso| Percolator| Drip| French Press or Plunger
Grind Size| Fine| Medium| Medium Coarse| Coarse
Grind Setting| 1-25| 26-34| 35-45| 46-55
Amount (Shot / Cup)| 6 secs per shot

10 secs per 2 shots

|

3 secs per cup

|

3 secs per cup

|

2 secs per cup

This coffee chart should be used as starting point to adjust your grind time and / or size, as both may vary when using different coffee bean types, age and degree of roast.

ADJUSTING CONICAL BURRS

• Some types of coffee may require a wider grind range to achieve an ideal extraction or brew.
• A feature of your Dose Control™ Pro is the ability to extend this range with an adjustable upper burr.

CARE, CLEANING & STORAGE

1. Empty beans from the hopper and grind out any excess beans (see below).
2. Unplug power cord from power outlet before cleaning.
3. Wash the hopper lid and bean hopper in warm soapy water, rinse and dry thoroughly.
4. Wipe and polish exterior of appliance with a soft damp cloth.

NOTE

• Do not use alkaline or abrasive cleaning agents, steel wool scouring pads, as these can damage the surface.
• Please do not clean any grinder parts or accessories in the dishwasher.

CLEANING CONICAL BURRS

Regular cleaning helps the burrs achieve consistent grinding results which is especially important when grinding for espresso coffee.

TROUBLESHOOTING

Grinder does not start after pressing

START / CANCEL

button

| •  Grinder not plugged in.

•  Bean hopper not attached correctly.

•  Grinder has overheated.

•  GRIND TIME dial is on 0 seconds.

| •  Plug power cord into power outlet.

•  Lock bean hopper into position. Refer to the Bean Hopper section on page 6.

•  Leave for 20 minutes to cool down before using again.

•  Rotate the GRIND TIME dial to increase grind time.

Motor starts but no ground coffee coming from grind outlet| •  No coffee beans in bean hopper.

•  Grinder / bean hopper is blocked.

| •  Fill bean hopper with fresh coffee beans.

•  Remove bean hopper. Inspect bean hopper and burrs for blockage. Refer to the Cleaning Conical Burrs section on page 10.

Can’t adjust the Grind Size Collar| •  Grind Size Collar too tight.

•  Coffee beans and grinds caught in the burrs.

•  Hopper not installed correctly.

| •  Rotate the Bean Hopper to turn the Grind Size Collar to adjust grind settings.

•  Run the grinder by pressing the START / CANCEL button while turning the Hopper.

•  Unlock the hopper and install as per instruction. Refer to the Bean Hopper section on page 6.

Unable to lock bean hopper into position| •  Coffee beans obstructing bean hopper locking device.| •  Remove bean hopper. Clear coffee beans from top of burrs. Re-lock the hopper into position & try again.
Not enough / too much coffee grind| •  Grind amount requires adjustment.| •  Use GRIND TIME dial to fine tune the amount more or less.
Portafilter overfills| | •  It is normal for the correct amount of coffee to appear overfilled in your portafilter. Untamped coffee has approximately three times the volume of tamped coffee.
Emergency stop?| | •  Press the START / CANCEL button to pause operation.

•  Unplug power cord from power outlet.

GUARANTEE

2 YEAR LIMITED GUARANTEE

• Sage Appliances guarantees this product for domestic use in specified territories for 2 years from the date of purchase against defects caused by faulty workmanship and materials.
• During this guarantee period, Sage Appliances will repair, replace, or refund any defective product (at the sole discretion of Sage Appliances).
• All legal warranty rights under applicable national legislation will be respected and will not be impaired by our guarantee.
• For full terms and conditions on the guarantee, as well as instructions on how to make a claim, please visit www.sageappliances.com.
• BRG Appliances Limited
• 86–90 Paul Street, London, EC2A 4NE, United Kingdom
• Freephone (UK Landline): 0808 178 1650 Mobile Calls (National Rate): 0333 0142 970.
• www.sageappliances.com
• Registered in England & Wales No. 8223512
• Registered in Germany No. HRB 81309 (AG Düsseldorf)
• Registered in France No. 879 449 866 RCS
• Due to continued product improvement, the products illustrated or photographed in this document may vary slightly from the actual product.

References

• Sage Appliances

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>