Berkel B12A-SLC Gravity Feed Slicer User Manual

June 4, 2024
Berkel

Berkel B12A-SLC Gravity Feed Slicer User Manual
Berkel B12A-SLC Gravity Feed Slicer

FEATURES

PERFORMANCE FEATURES

  • 1-speed, 1 ⁄2 HP, totally enclosed and permanently lubricated knife motor
  • Precise slice adjustment to a thickness of 9 ⁄16″ (14 mm)
  • Automatic / Manual operation
  • Single speed automatic carriage
  • Carriage handles food up to 103 ⁄4″ (273 mm) wide, by 75 ⁄8″ (194 mm) high or 73 ⁄8″ (187 mm) diameter
  • Furnished in 115/60/1, 4.0 amp, AC, ETL listed

EASY TO OPERATE FEATURES

  • 45° product table with removable meat pusher
  • Top-mounted, two stone knife sharpener produces aconsistently sharp knife edge
  • Attached 6-foot, flexible, 3-wire cord and plug for grounded receptacle (5-15P)
  • No Volt Release
  • Gauge plate/carriage interlock

EASY TO CLEAN FEATURES

  • Removable carriage arm
  • Permanent, tapered knife ring guard covers non-slicing portion of knife even when the center plate is removed; ring guard design provides more room behind the knife for easy cleaning
  • Finish is stainless steel and sanitary anodized aluminum; unit disassembles quickly without tools for easy cleaning
  • Nominal 12″ (300 mm) diameter; hollow ground, hardened and polished forged chromium-plated carbon steel knife
  • Positive, moisture protected, on/off switch with power light indicator

SPECIFIER STATEMENT

Berkel Model B12A-SLC automatic/manual gravity feed slicer features Berkel’s hollow ground chromium-plated, carbon steel knife and built-in sharpener. The permanent, tapered guard covers the non-slicing portion of the knife, even when the center plate is removed. The 45° table makes product feed easier, creating more consistent and uniform slices with less waste. The 1 ⁄2 HP motor, 12″ knife and large product table are ideal for handling oversize meats, cheeses and a variety of other products. The B12A-SLC is easy to clean and disassembles quickly without tools. The compact space-saving design is ideal for limited kitchen counter space.

Complies with NSF/ANSI Standard #8.

SPECIFICATIONS

Motor: 1-speed, 1⁄2 HP, totally enclosed, permanently lubricated ball bearings, thermally protected.

Electrical: Furnished in 115/60/1, 4.0 amps, AC, ETL listed.

Finish/Construction: All food contact areas are stainless steel or anodized aluminum including the pusher, gauge plate, product table, center plate, knife ring guard and one-piece base. Slicer disassembles quickly without tools for easy cleaning.

Knife: Nominal 12″ (300 mm) diameter, hollow ground, hardened and polished forged chromium-plated carbon steel, rotates at 380 rpm.

Cutting Capacity: Carriage handles food up to 103 ⁄4″ (273 mm) wide by 75 ⁄8″ (194 mm) high or 73 ⁄8″ (187 mm) diameter.

Slice Thickness: Precision system provides infinite slice adjustment and consistent cuts of hard or soft foods from tissue thin to 9 ⁄16″ (14 mm).

Full Gravity Feed: Full 45° angle feed requires less mechanical pressure. Equipped with removable anodized aluminum pusher to hold product and minimize waste.

Knife Sharpener: Top mounted, two stone system for a lasting, razor-sharp edge.

Knife Ring Guard: Permanent, tapered guard covers non-slicing portion of knife edge even when the center plate is removed.
The ring guard is designed to provide added room behind the knife for easy cleaning.

On/Off Switch: Highly reliable, moisture resistant, on/off switch with power light indicator.

Cord and Plug: Attached 6-foot, flexible, 3-wire cord and plug for grounded receptacle (5-15P).

Warranty: All parts, service and travel coverage for one year, excluding wear items.

Dimensions

DimensionsDimensions

MODEL NUMBER| CUTTING CAPACITY| SLICE THICKNESS| KNIFE DIAMETER| PRODUCT DIMENSIONS
---|---|---|---|---
WIDTH| DEPTH| HEIGHT
B12A-SLC| 103⁄4″ (273 mm) wide 75⁄8″ (194 mm) high
73⁄8″ (187 mm) diameter| to 9⁄16″ (14 mm)| 12″ (305 mm)| 23″ (584 mm)| 271⁄2″ (699 mm)| 281⁄4″ (718 mm)
MODEL NUMBER| MOTOR| ELECTRICAL| WEIGHT| BOX DIMENSIONS
---|---|---|---|---
WIDTH| DEPTH| HEIGHT
B12A-SLC| 1-speed
1⁄2 HP| 115/60/1
4.0 amps| Net 107 lbs. (49 kg)
Ship 123 lbs. (56 kg)| 31″
(787 mm)| 32″
(813 mm)| 39″
(991 mm)

As continued product improvement is a policy of Berkel, specifications are subject to change without notice

BK45785 (06-21) Berkel • 2006 Northwestern Pkwy, Louisville, KY 40203 • Phone: 800-814-2028 • Fax: 800-444-0602www.berkelequipment.com Printed in U.S.A.

Logo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals