iRig HD X Universal Guitar Audio Interface User Manual

: June 13, 2024
: iRig

Table of Contents

iRig HD X
Register your iRig HD X
iRig HD X overview
Installation and setup
Multi-function knob and LED ring
Tuner mode
Troubleshooting
Specifications
Warranty
Support and more info
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

**iRig HD X Universal Guitar Audio Interface User Manual

**

iRig HD X

Thank you for purchasing iRig HD X.

Your package contains:

iRig HD X
USB-C to USB-C cable
USB-C to Lightning cable

iRig HD X is the new member of the iRig guitar interface family, specifically designed to work directly with iOS and Mac/PC.

This new iRig interface is redesigned in an all-new enclosure and sports some important new features. All of the audio I/O remains the same as the wide popular iRig guitar interfaces, and now it is possible to switch on a tuner for the connected instrument, activate the direct monitor for zero-latency monitoring on the headphones, and change the interface’s behavior with the innovative Loopback+ mode.

When Loopback+ is not active the interface works as a 1 in / 2 out interface. When the Loopback+ is active the interface works as a 3 in / 2 out interface, the instrument input is routed to input 3 and a loopback feature is active on inputs 1 and 2, so that it is possible to route a processed signal to a streaming app

Register your iRig HD X

By registering, you can access technical support, activate your warranty and receive free JamPoints™ which will be added to your account. JamPoints™ allow you to obtain discounts on future IK purchases! Registering also keeps you informed of all the latest software updates and IK products. Register at: www.ikmultimedia.com/registration

iRig HD X overview

Function LEDs – These four blue LEDs show you the current function that it is controlled with the knob: headphones volume, FX/THRU, direct monitoring, Loopback+ mode.
Multi-function knob and LED ring – This single knob allows you to control all the features of the interface. The 9 segment LED meter gives you important information about the iRig HD X operating status and audio level. See Section 3 in this manual for more information.
Instrument inpu t – 1/4” (6.35mm) jack type – Connect your instrument here (e.g., guitar).
Amplifier output – 1/4” (6.35mm) jack type – You can connect an external amplifier to iRig HD X thanks to the “Amplifier output jack”. This allows you to send the processed signal (i.e. from a rig inside your mobile device) or a direct unprocessed signal, out to your amplifier or other unbalanced input.
Headphone output – 1/8” (3.5mm) jack type – connect here your headphones.
Host connection – USB Type C – allows you to connect iRig HD X to your computer or mobile device

Installation and setup

Setup

Connect the included USB-C cable to the iRig HD X.
Connect the cable to the host device (computer or mobile device).
Connect your guitar, bass or other mono instrument to the 1/4” input jack on your iRig HD X.
Launch your preferred audio App and set iRig HD X as your default audio device. To do so, please refer to the documentation of the App or Software you’re using.
Connect your headphones, mixer or powered speakers to the iRig HD X headphone jack.
Connect an external amplifier to the 1/4” TS Amplifier output jack on iRig HD X and select the type of signal sent to the output with the THRU-FX function.

Important note: iRig HD X includes a high headroom input which eliminates the need for a dedicated gain control. The input gain is pre-set and can accept all types of pickups, active or passive, so you can plug and play with any guitar or bass and get started right away.

Multi-function knob and LED ring

This single knob allows you to control all the features of the interface including headphone volume, FX/THRU, direct monitoring, Loopback+ mode and Tuner.

**Headphone volume control

** When the headphone symbol is lit blue, the knob will control the level of the headphone output and the LED ring will show the peak level of the input signal.

When you move the knob to increase or decrease the headphone volume, the LED ring will temporarily show you the current level. After 2 seconds the LED ring will return to showing the input level.

Headphones level can also be controlled with the host volume’s control.

Press the knob to get to the FX/THRU control.

IMPORTANT NOTE: if no sound is coming out from the headphones or the Amp Out, you should check the volume of the connected host: you can control the volume of the host with its volume buttons.

FX/THRU

When the FX/THRU symbol is lit blue, you can select the type of output that is sent thru the Amplifier output jack by rotating the knob: CCW rotation will activate the FX path and the first half of the LED ring will turn on, CW rotation will activate the THRU path and the second half of the LED ring will turn on.

When set to THRU, the Amplifier output jack carries the same signal that is sent to the instrument input. This mode is typically used to send the dry instrument signal back out to an instrument amplifier or other unbalanced input. This lets you plug your favorite amplifier into the Amplifier output jack and, at the same time, connect iRig HD X to your host device that runs, for example, your favorite recording app. This control won’t affect the headphone output.

When set to FX, the Amplifier output jack carries the processed signal from your host device to an instrument amplifier. This lets you process your instrument inside your favorite app and then send it to, for example, an amplifier’s clean channel.

When in FX mode, the Amplifier output’s level is controlled by the headphone volume control

When you move the knob, the LED ring will temporarily show you the current setting. After 2 seconds the LED ring will return to showing the input level.

Press the knob to get to the direct monitoring control.

Direct monitoring control

When the direct monitoring symbol is lit blue, you can turn on or off the direct monitoring feature by rotating the knob: CW rotation will activate the direct monitoring and the second half of the LED ring will turn on, CCW rotation will deactivate the direct monitoring and the first half of the LED ring will turn on.

When you move the knob to activate or deactivate the direct monitoring, the LED ring will temporarily show you the current status. After 2 seconds the LED ring will return to showing the input level. Headphone level can also be controlled with the host volume’s control.

Press the knob to get to the Loopback+ control.

Important Note: if direct monitoring is set to ON, the Amplifier output is forced to be in THRU. When in this state, the FX/THRU LED will blink till the direct monitoring is set to OFF.

By forcing the Amplifier output to FX it will automatically set direct monitoring to OFF.

Direct monitoring control
When recording an audio signal into your audio software, there is often a slight delay before it reaches the
outputs of the software and iRig HD X. This delay, called latency, is caused by the computer processing required
to convert and record audio. Since this delay can be distracting, iRig HD X provides a direct monitoring path
from the inputs to the outputs, which is activated by the direct monitoring control. When direct monitoring is
enabled, the input signal is mixed with the output signal from your audio software and routed directly to both
the headphone output. This lets you hear the “live” inputs without latency. The direct monitor has no effect on
what is being recorded by your software. When using the direct monitoring feature, make sure any software monitoring option for direct (or “low latency”) monitoring is disabled. Disabling low latency monitoring prevents “double-monitoring” of input audio signals when using the direct monitoring feature. When “double-monitoring” occurs, there will be an increase in volume and an undesirable “phasing” sound. For more details about its monitoring function, refer to the documentation for your audio software

**Loopback+ mode

** When the loopback+ symbol is lit blue, you can change the operation mode of the interface by activating or deactivating the loopback+ feature, by rotating the knob: CW rotation will activate the loopback+ and three LEDs of the LED ring will turn on, CCW rotation will deactivate the loopback+ and the central LED of the LED ring is on.

To confirm the operation selection, press the knob: when passing by either modes, the iRig HD X will restart itself and the channel count of the interface will change accordingly.

Hint: make sure that you change the operation mode before opening your recording/ streaming App. This because each time you change operation mode, the iRig HD X will restart itself.

The Loopback+ feature is useful if you want to stream an effected signal to the streaming App.

When the Loopback+ is off, the iRig HD X acts as a 1 in – 2 out interface.

CH 1: Instrument Input
LOOPBACK+ OFF LOOPBACK+ ON

When the Loopback+ is on, the iRig HD X acts as a multichannel 3 in – 2 out interface.

CH 1 : Loopback L
CH 2 : Loopback R
CH 3 : Instrument Input

**OFF LOOPBACK+ ON

** In order to use the multichannel functionality, a DAW or an App that supports multitrack recording is needed. If you’re using an App make sure you set it to run in Background, this allows you to use it while you’re using other Apps (such as streaming Apps).

The Loopback+ operation is particularly useful when you want to stream a processed signal from the instrument input to your audience.

Important Note: please note that some streaming apps may exhibit some anomalous behavior in the management of multichannel interfaces. For example, Apps like Facebook for iOS/Android, will only support channel 1 as input of the audio streaming: this prevents the ability to use stereo or multichannel streaming.

How to stream a processed signal
In order to stream a processed signal to your audience (e.g., an effected guitar), follow these steps:

Set the iRig HD X to operate in Loopback+ mode as described above.
Open a DAW or an App, on the connected host, that supports multitrack recording.
Create a mono track assigning Input 3, which corresponds to the iRig HD X instrument input. This is the track that will be processed.
Insert an effect processor on this track and, if it is not on by default, activate the input monitoring. To activate the input monitoring option on the track, please refer to the software documentation.
Usage Note: make sure that the App you are using is set to run in Background, this allows you to use it while you are using other Apps (such as streaming Apps). To set the App to run in background please refer to the software documentation
Now the processed signal from input 3 will come back to the inputs 1 and 2: these are the inputs usually used by your streaming app.
Open your preferred streaming software and start your stream. Your audience will be able to listen to the audio that is input to channels 1 and 2.

Tuner mode

By pushing and holding the knob for more than one second, the iRig HD X will enter into Tuner Mode. Push and hold the knob to exit the tuner and return to the previous selected mode.

When in tuner mode, the LED ring will show you both the note that’s been played and the tuning indication: when the central LED is ON the note is tuned (inside the +/- 5 cents range).

Troubleshooting

I don’t get any sound.
In order for iRig HD X to turn on, a Core Audio-compatible audio app must first be launched on your iOS device or Mac

iOS: ensure that you are using an app that works with audio input from the Lightning dock connector.
Mac: ensure that you have set “iRig HD X” as the audio input device on the audio app you are using.

A “phasing” sound is present while monitoring the incoming signal.
If a “phasing” effect is present, you can disable the input monitoring from your recording app or turn off the direct monitor on iRig HD X.

No sound is played back thru the connected headphones.
Use the headphones volume control to set the volume and check the volume of the connected host: you can control the volume of the host with its volume buttons.

Specifications

Common
AD and DA resolution: 24-bit
Sampling rate: 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz
Host connection: USB Type-C socket

Instrument Input
Input impedance :1 MOhms
Maximum input level: +9 dBu
Frequency response: From 20 Hz to 20 kHz within 3 dB (96 kHz sample rate)
Dynamic range: 115 dB(A

Amp output
Configuration: Unbalanced
Output impedance: 3.3 kOhms
Output level: 0 dBFS corresponds to -2 dBu
Frequency response : From 15 Hz to 40 kHz within 1 dB (96 kHz sample rate)
Dynamic range: 97 dB(A

Headphone Output
Output impedance: 22 Ohms
Maximum output level: approx 8 mW into 32 Ohms load
Frequency response: From 15 Hz to 40 kHz within 1 dB (96 kHz sample rate)
Dynamic range: 95 dB(A)

Warranty

Please visit:
www.ikmultimedia.com/warranty for the complete warranty policy

Support and more info

www.ikmultimedia.com/support
https://www.ikmultimedia.com/products/irighdx

UF.S.A.

FCC statement
This device complies with Part 15.107 and 15.109 Class B of the FCC Rules CFR47: October 2010. Operation is subject to the following two conditions:

This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

EUROPE

Made For

iPaod
iPhone
iPad

www.ikmultimedia.com

All specifications are subject to change without further notice.

Document Version: 1.2.1
Latest revision: 2023/08/28

IK Multimedia Production Srl
Via dell’Industria, 46,
41122 Modena
Italy

K Multimedia US, LLC
590 Sawgrass Corporate Pkwy.
Sunrise, FL 33325
USA

IK Multimedia Asia
TB Tamachi Bldg. 1F, MBE #709
4-11-1 Shiba
Minato-ku, Tokyo 108-0014
Japan

iRig® HD X is a trademark or registered trademark property of IK Multimedia Production Srl. All other product names and images, trademarks and artists names are the property of their respective owners, which are in no way associated or affiliated with IK Multimedia.