R2B 8720165904815 10-Inch Ring Lamp with Tripod Instruction Manual

: June 5, 2024
: R2B

Table of Contents

Introduction
Warnings
Overview of all components
How To Assemble The Ring Light
How To Install A Phone Holder
How To Use Selfie Stick With Tripod
Lighting Controller
How To Choose Lighting Mode
Suitable For Most Of USB Port
Questions? Please contact us!
Read User Manual Online (PDF format)
Download This Manual (PDF format)

R2B 8720165904815 10-Inch Ring Lamp with Tripod Instruction Manual

Introduction

We will assist you as best we can in this manual. The procedures will be mainly explained with images, so that you get the clearest possible explanation. is the manual not clear? You can reach us from Monday to Friday between 9:00 am and 5:00 pm on our phone number. Or just write us an email and we will reply within 24 hours on working days.

Contact details:
Telephone number : 0299 77 94 53
E-mail: info@r2bstore.nl
Address: Magneet 12T, 1446XD, Purmerend, The Netherlan

Product details:

Brand: R2B
Model: Ringlamp 001, 10 inch
Type designation: Selfie Ring Light with Extendable Tripod Stand
Serial number: RL-001
Lamp Size: 26cm / 10 inch
Tripod Stand Height: 46-160cm
Total height: adjustable from 72cm to 186 cm
Material: ABS Aluminum
Tripod Stand Material: Aluminum
Number Of Lamp Beads: 120pcs
Brightness: 3 kinds of light sources with 10 levels
Color Temperature: 3000k-6000k
Input: 5V 2A
Display Index: >80RA
Power Supply: USB interface

Warnings

The intended use of this product is to use this product as a tripod stand with a ringlamp in which a phone can be placed to record a person for making videos or to make pictures. It can both be used for professional and unprofessional usage.
Do not use this product in a damp or wet place.
Do not use this product when it is windy outside.
Prevent exposure to the sun.
When you do not use the product for a long time, please unplug.
Do not let children under 8 use this product without the supervision of an adult.
When transporting the product make sure to pack it in its original packaging.
Watch out with sharp components of the product and do not hold close to eyes or other vulnerable body parts.
The product can be maintained by a non skilled person but when doubting always contact us. The maintenance activities are: checking if screws are loose and all parts are still connected.
At the end of its useful life the product needs to be dismantled and disposed safely in a separate designated bin for each of the materials.
In normal use the product should work as described in the following instruction manual when this is not the case directly stop using the product and contact us to solve this.
If the lights of the product are not working then unplug the product and contact us directly.
If the lighting controller is not working stop using the product and contact us directly.
There is not any inherent hazard or dangers to particular vulnerable groups.
When taking all these warnings in account there will always be a probability of an injury or broken parts of the product when in use. Please take this into account. Use of the product in the places mentioned in the warnings such as a wet or windy place can lead to an injury and broken parts of the product. For example the product can fall and some parts can break or an injury can occur due to slippery ground.

Overview of all components

Warning:

Before assembling the product please make sure all components are delivered, if one of the components is missing please do not use the product and contact us directly

How To Assemble The Ring Light

Install the light screw hole into the selfie stick screw
Keep the light fixed, tight the light by rotating the screw

How To Install A Phone Holder

Step 1 Put the phone holder tube into the screw hole.
Install A Phone Holder

Step 2 Tighten the holder clockwise. Install A Phone
Holder

How To Use Selfie Stick With Tripod

Adjust the tripod up and down, fix the tripod leg by rotating the screw clockwise (counterclockwise loosened).
Extend the tripod stick from bottom to top by unlocking the lock knot , lock the lock knot to fix the tripod stick at any desired height.
Insert the saddle plate into the top of the tripod, add screws to tighten or remove the lights and other accessories
Loosen the screw counterclockwise, select the appropriate angle (180 rotation angle), then tighten the screw clockwise to fix the selfie stick platform head.