Ruijie Networks RAP1200 1267Mbps Wall Mounted Access Installation Guide
- June 12, 2024
- Ruijie Networks
Table of Contents
Ruijie Networks RAP1200 1267Mbps Wall Mounted Access
Packing List
| Item | Name | Quantity | Unit |
|---|---|---|---|
| 1 | RG-RAP12.oO(F)Host | 1 | Set |
| 2 | This Quick Installation Guide | 1 | Copy |
| 3 | Warranty card | 1 | Copy |
| 4 | Mounting Screw | 2 | Piece |
Appearance and Interface
Top View
Note:
- System LED indicator
- LAN port
- Reset button
Rear View
Note:
- WAN/PoE Port
When powering 1he AP through PoE, connect one end of 1he E1hemet cable to the WAN/PoE port and the other end to a PoE- capable device.
LED Indicator and Button
| LED Indicator and Button | Frequency | Description |
|---|---|---|
| LED Indicator | Solid blue | Normal operation. |
| Off | The AP not receiving power. | |
| Blinking(0.5Hz) | Normal operation, but the AP is not connected to Ruijie |
Cloud.
Fast blinking(10Hz)| Possible cases:
- Restoring the factory settings
- Upgrading the firmware
- Restoring the image file
- 4.lnitializing the device
Reset Button| Press for less than 2 seconds| Restart the device.
Press for more than 5 seconds| Restore the factory settings.
Product Installation
-
Loosen screws on the 86-type faceplate that is mounted on the wall.
-
Connect the Ethernet cable to the WAN/PoE port.
-
Align screw holes on both sides of the device over those on the faceplate. And then tighten screws with a screwdriver.
-
Install the plate cover in the way as shown in the figure.
Network Configuration
Method 1 (Recommended)
Scan the QR-code on the manual or device to download Ruijie Cloud App, and
configure the network according to App.
Method 2
Connect to the SSID (@Ruijie-mxxxx when there are multiple devices and
@Ruijie-sxxxx when there is only one device), or connect the cable with LAN
port, and visit http://10.44.77.253 (default password: admin). It is
recommended to configure the IP address as 10.44.77.250.
Note :
This equipment is restricted to indoor operation in 5.15-5.25GHz for Hong
Kong.