Lauten Audio LS-208 Condenser Microphone Operation Manual
- June 13, 2024
- LAUTEN AUDIO
Table of Contents
Lauten Audio LS-208 Condenser Microphone
Summary
The Lauten Audio LS-208 is a professional front-address large diaphragm condenser voice and instrument microphone offering excellent versatility and the recording quality of high-end studio microphones. The LS-208 will capture the brilliance and expressiveness of any source in broadcast, sound reinforcement, and studio recording. It features a wide frequency response with a full 120dB of dynamic range and 135dB of SPL handling without the need for attenuation. With its excellent off-axis rejection it’s excellent for focusing on the source and reducing bleed in multi-source live environments. Constructed from high-quality components and outfitted with frequency shaping high and low-cut filters, the LS-208 comes with a spider shock mount great for broadcast, a hard mount for tight spots, a foam windscreen to protect from plosives, and a rugged road case housing all these accessories.
The LS-208 is a great choice for
- Spoken Voice, and Singing
- Radio broadcasting
- Podcast and Voice-overs
- Highly dynamic instruments and environments
- Close micing drums and guitar amps
- Studio quality recordings nearly anywhere
Description
- The LS-208 is a professional front-address large-diaphragm condenser microphone designed for studio, live, and broadcast recording and sound reinforcement. The LS-208 combines the handling capabilities of a dynamic microphone with the recording qualities of a professional high-end studio condenser microphone.
- The LS-208 does not require pre-attenuation but can handle 135dB SPL due to its circuit design. Highly unique for a microphone of its type is its ability to capture a full 120db of dynamic range without the use of internal or external pre-attenuation. This gives engineers the ability to capture brilliant recordings of highly dynamic instruments and environments without sacrificing sound quality.
- The LS-208 also features excellent off-axis rejection. It will provide excellent rejection of off-axis voices, instruments, crowds, etc., making it great for live radio broadcasts and podcasts, or for multi-instrument, live-studio, and on-stage recording or sound reinforcement.
- The Independent, multi-stage, high, and low-cut filters help engineers balance recordings at the microphone and aid in successfully capturing the performance reducing the need for mixing. The 2-stage low-cut aids in reducing low-end rumble, muddiness, and proximity effect. The 2-stage high-cut helps tame bright instruments and high frequencies.
The LS-208 is fully accessorized and ships with the following.
- Spider-shock mounts with threaded nut and adjustable elbow joint.
- Hard mount with threaded nut and adjustable elbow joint.
- Foam windscreen to protect transducer element from plosives, wind, and debris
- Hard case that fits all accessories and is built for the rigors of the road.
Unlike any microphone of its kind on the market today, the LS-208 offers excellent off-axis rejection and dynamic-range capabilities combined with studio-quality sound to achieve exceptional results in any recording environment.
Key Features
- Full 120dB (135dB total) dynamic range without the need for additional attenuation
- Wide frequency response and studio-quality sound
- Excellent off-axis sound rejection
- Independent 2-stage low and high-cut frequency switches
- Internally shock-mounted pressure gradient condenser element
- Both spider shock mount and hard mount included
- Foam windscreen for plosive and wind rejection
Operating Instructions
Quick Start Guide/Sequence of Operation
- Attach the microphone to its threaded hard mount or spider shock mount and tighten the wing nut. Attach the chosen mount to a high-quality microphone stand. Loosen the wing nut and adjust for proper pickup position.
- Make sure the phantom power is turned off and the gain on the preamplifier channel is turned down.
- Securely connect the female end of a high-quality standard 3-pin XLR microphone cable to the male connector on the microphone, and then the male end of the XLR cable to your recording interface or microphone preamp.
- After securely connecting the cables, turn on the +48v phantom power and allow the microphone to warm up for a couple of minutes.
- If you are using the microphone for vocals or voice, please ensure you use a high-quality pop filter or the included foam windscreen.
- Gradually increase the input gain on your recording interface or preamp to test and achieve your desired microphone input levels.
- Congratulations, you are ready to begin using your microphone.
High-pass Filter
- The LS-208 features a 2-stage high-pass filter located on the left side of the microphone. The low-cuts are at 50Hz and 120Hz. The “HP” is the off position.
Low-pass Filter
- The LS-208 features a 2-stage low-pass filter located on the right side of the microphone. The high-cuts are at 8KHz and 10KHz. The “LP” is the off position.
-
Power Requirements
This microphone requires +48v phantom power. Phantom power can be found as a built-in feature on most modern recording interfaces and microphone preamplifiers, or you may use an external +48v phantom power supply.- Do not connect this microphone to any power source other than +48v phantom power. Using +48v phantom power is the only way to ensure safe and reliable operation.
-
Connections
Always use a high-quality 3-pin XLR microphone cable with your microphone. Connect the female end of the XLR cable to the microphone and the male end of the XLR cable to your recording interface.
Specifications
- Type: Front-Address Pressure gradient large-diaphragm transducer microphone.
- Polar Patterns: Cardioid
- Circuit: JFET transistor with transformer-balanced output
- Frequency Range: 20Hz-20KHz
- Dynamic Range: 135dB (Full Range >120dB) without the need for internal or external attenuation (15dB to 135dB)
- Impedance: >150 ohms
- SPL Handling: >135dB (0.5%THD@1000Hz)
- Self-noise Level: <15dB-A
- Sensitivity: 5mV/Pa -46dBV (0 dB=1V/Pa 1kHz)
- Special Features: Independent 50 & 120Hz low-cut & 8 & 10 kHz high-cut filters
- Connector: 3-pin XLR
- Power Requirement: +48v Phantom power
- Weight:
- Microphone only: 1.05lbs – 0.48kg
- w/ shock mount: 1.75lbs – 0.79kg
- w/ hard mount: 1.30lbs – 0.59kg
- w/ case and accessories: 5.40lbs – 2.45kg
- Dimensions:
- Length: 7.5in (19.05cm)
- Diameter (w/ arm): 1.98in (5.3cm)
- With Shock mount
- Width: 4.7in (12cm)
- Depth: 4.8in (12.2cm)
Care and Cleaning
THERE ARE NO SERVICABLE PARTS INSIDE THE MICROPHONE Only authorized Lauten Audio technicians should perform disassembly and maintenance on any part of this microphone. Disassembling and modifying any part of this microphone by anyone other than an authorized technician will void its warranty. NEVER DISASSEMBLE ANY PART WHEN POWER IS BEING SUPPLIED
- This microphone is a precise and delicate instrument. Do not drop or allow the microphone to collide with other objects as this may damage the internal components.
- The metal surfaces of the microphone can be cleaned with mild mineral spirits or alcohol on a lightly dampened very soft cloth. Be very careful not to get any moisture inside the microphone grill or microphone.
Warranty
This microphone comes with a 1-year limited warranty from the date of sale from an authorized dealer/distributor. Items limited to 90-day coverage include shock mounts, shock mount bands, hard mounts, clips, windscreens, cases, boxes, cables, microphone bags, and vacuum tubes.
FREQUENTLY ASKED QUESTIONS
What is the Lauten Audio LS-208 Condenser Microphone?
The Lauten Audio LS-208 is a high-quality condenser microphone designed for professional audio recording. It is known for its exceptional audio performance and versatility.
What are the key features of the Lauten Audio LS-208 microphone?
The Lauten Audio LS-208 microphone typically features a cardioid pickup pattern, a large diaphragm capsule, a wide frequency response, high sensitivity, and is designed for capturing vocals, instruments, and studio recordings with clarity and precision.
Is the Lauten Audio LS-208 suitable for recording vocals?
Yes, the Lauten Audio LS-208 is suitable for recording vocals, providing clear and detailed sound reproduction, making it ideal for singers, podcasters, and voice-over artists.
Can I use it for instrument recording?
Absolutely, the Lauten Audio LS-208 is versatile for instrument recording, capturing acoustic instruments, guitar amps, pianos, and more with precision.
Does the Lauten Audio LS-208 microphone require additional audio interfaces or drivers?
The Lauten Audio LS-208 typically uses an XLR connection and requires an audio interface or mixer with XLR inputs. It does not require additional drivers; it's compatible with standard audio equipment.
Is there a headphone monitoring feature?
No, the Lauten Audio LS-208 microphone itself does not include a headphone monitoring feature. You would need a separate audio interface or mixer with headphone monitoring capabilities for this.
What is the frequency response of the Lauten Audio LS-208 microphone?
The microphone typically has a frequency response that captures 20 KHz of audio frequencies with exceptional accuracy, providing clear and natural sound reproduction.
Is there an adjustable gain control on the microphone?
No, the Lauten Audio LS-208 microphone does not typically have an adjustable gain control. Gain control is usually handled by the connected audio interface or mixer.
What are the weight and dimensions of the Lauten Audio LS-208 microphone?
The Lauten Audio LS-208 microphone is typically compact and lightweight, but 1181.1 x 787.4 x 393.7 inches dimensions and 4.99 pounds weight of the mic. Refer to the product documentation or the manufacturer's website for precise measurements.
Is it suitable for live performances?
While primarily designed for studio use, some users may use the Lauten Audio LS-208 for live performances in controlled sound environments.
Can I use it with recording software and DAWs?
Yes, the Lauten Audio LS-208 is compatible with various recording software and digital audio workstations (DAWs) on both Windows and Mac platforms, provided you have the necessary audio interface and setup.
Is there a carrying case included for transport and storage?
The Lauten Audio LS-208 microphone package may include a protective carrying case for convenient transport and safe storage, but it's advisable to check the product listing or package contents to confirm.
What type of connector does it use?
The Lauten Audio LS-208 microphone typically uses an XLR connector, which is a standard for professional microphones and audio equipment.
Is there a warranty for the Lauten Audio LS-208 Condenser Microphone?
Warranties for the Lauten Audio LS-208 microphone can vary, but they often range from 1 year to 5 years or more.
Where can I purchase the Lauten Audio LS-208 Condenser Microphone?
You can typically purchase the Lauten Audio LS-208 Condenser Microphone from authorized Lauten Audio dealers, music stores, or reputable online marketplaces to ensure you receive genuine products.
Does it come with a shock mount or pop filter?
Some packages of the Lauten Audio LS-208 microphone may include a shock mount or pop filter, but it's important to check the product listing or package contents to confirm if these accessories are included.
DOWNLOAD THE PDF LINK:Lauten Audio LS-208 Condenser Microphone Operation Manual