LAUTEN AUDIO TOM MIC Purpose Built Large Diaphragm Condenser User Guide
- June 5, 2024
- LAUTEN AUDIO
Table of Contents
LAUTEN AUDIO TOM MIC Purpose Built Large Diaphragm Condenser
Product Information
Specifications
- Model: 32MM CAPSULE
- Directionality: Supercardioid
- Off-axis Rejection: Up to 28dB
- Frequency Response:
- High Pass Filter (HP): 140Hz, 80Hz
- Low Pass Filter (LP): 12kHz
- Phantom Power Requirement: 48V
Product Usage Instructions
- The shield on the microphone signifies the front of the mic.
- Control the filters at the source for optimal performance.
- Use this setting for a natural sound without any equalization adjustments.
FAQ
- Q: What is the purpose of the shield on the microphone?
- A: The shield signifies the front of the microphone for proper orientation during use.
OVERVIEW
FILTER SETTINGS
FLAT/FLAT = NO EQ – NO PROBLEM
80Hz/FLAT = BOTTOM-END CLEANUP
FLAT/12kHz = SLAP REDUCTION
80Hz/5kHz = ONLY THE NOTE
FLAT/5kHz = BOTTOM TOM
140Hz/FLAT = RACK ATTACK
MIC PLACEMENT
STUDIO
- Tom Mic over rim & approx. 4” from head.
LIVE
- Tom Mic in safe zone & approx. 2” from head.
BOTTOM
- Tom Mic under drum & approx. 3” from head.
+48V TOM MIC REQUIRES 48V OF PHANTOM POWER TO WORK
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>