Focal Chorus SR700 Sealed Effect Surround Loudspeaker Specification and Datasheet
- October 31, 2023
- FOCAL
Table of Contents
Focal Chorus SR700 Sealed Effect Surround Loudspeaker
Introduction
The SR 700 is a compact and discreet loudspeaker that can be easily integrated into your interior thanks to the built-in Polyfix wall mount. Featuring an optimized phase and the same speaker drivers as the Chorus line, the SR 700 is ideal for surround sound in large rooms and for accompanying various Chorus multi-channel installations.
Product Components
- 61/2″ (16.5cm) Polyglass midbass.
- Polyfix wall mount system. Easy mounting.
- New suspension material “PORON”. Smoother sound.
- OPC crossover. Perfect staging. New insulated Focal terminals.
- New grille cloth design Better integration
Key features
- The SR700 boasts a compact and discreet design that seamlessly integrates into your room decor, making it an unobtrusive addition to your home theater setup.
- This loudspeaker comes with a built-in Polyfix wall mount system, making it easy to install and position on your wall, ensuring a secure and stable placement.
- The 6.5″ (16.5cm) Polyglass midbass driver, borrowed from the Chorus 700 range, delivers a rich midrange and contributes to the overall exceptional sound quality.
- The 1″ (25mm) TNV2 Al/Mg inverted dome tweeter, inspired by Focal’s reference Utopia line, ensures precise and smooth sound reproduction with improved harmonics richness and a more precise soundstage.
- The speaker is optimized for phase coherence, enhancing the overall sound staging and accuracy, making it an ideal choice for surround sound in larger rooms.
- The use of PORON suspension material contributes to smoother sound reproduction, reducing distortion and enhancing overall audio quality.
- The speaker features an OPC (Optimum Phase Crossover) for perfect staging and audio coherence, ensuring that sound transitions seamlessly between drivers.
- The new insulated Focal terminals help maintain signal purity, contributing to improved audio performance.
- The SR700 features an elegant black satin finish that not only complements your interior decor but also adds a touch of sophistication to your home theater setup.
- With a frequency response ranging from 75Hz to 28kHz and a low-frequency point of 65Hz, these speakers are capable of reproducing a wide range of audio frequencies with clarity.
- The speakers have a sensitivity of 90dB (2.83V / 1m), making them efficient in converting amplifier power into sound output.
- These speakers have a nominal impedance of 8 Ohms and are compatible with amplifiers ranging from 25 to 100 watts, making them versatile and suitable for various audio setups.
- The Polyfix wall mount system ensures easy and hassle-free installation, allowing you to position the speakers optimally for your surround sound experience.
- Speakers designed and manufactured by Focal.
- Exceptional sound and quality for the price.
- Black Satin finish.
Finish available
Product Specifications
- Type: 2-way sealed-effect loudspeaker
- Drivers:
- Midbass: 6.5″ (16.5cm) Polyglass midbass driver
- Tweeter: 1″ (25mm) TNV2 Al/Mg inverted dome tweeter
- Frequency Response (+/- 3dB): 75Hz – 28kHz
- Low-Frequency Point (-6dB): 65Hz
- Sensitivity (2.83V / 1m): 90dB
- Nominal Impedance: 8 Ohms
- Minimum Impedance: 3.7 Ohms
- Recommended Amplifier Power: 25 – 100W
- Crossover Frequency: 3000Hz
- Dimensions (HxLxP): 11 5/8 x 15 2/3 x 5 7/8 inches (295x398x149mm)
- Net Weight: 10.3 pounds (4.7kg)
Product Usage Instructions
Using the Focal Chorus SR700 Sealed Effect Surround Loudspeaker effectively and safely is essential to ensure the best audio experience. Here are the usage instructions to help you make the most of this product:
Installation
- Choose the ideal location on your wall for installing the SR700 speakers. Ensure they are strategically placed to create an immersive surround sound experience.
- Utilize the built-in Polyfix wall mount system to securely attach the speakers to the wall. Follow the provided installation instructions carefully to ensure stability and safety.
- Consider the spacing and placement of the SR700 speakers to achieve balanced sound distribution. Aim for an even soundstage in your room.
Wiring:
- Connect high-quality speaker wire to the terminals on the back of the SR700 speakers. Ensure proper polarity, matching positive (+) and negative (-) connections.
- Connect the other end of the speaker wire to your amplifier or receiver, following the amplifier’s instructions. Make sure the amplifier is powered off during the wiring process.
Amplifier Settings:
- Verify that your amplifier is set to match the nominal impedance of the SR700 speakers, which is 8 Ohms.
- Ensure that the amplifier’s power output falls within the recommended range of 25 to 100 watts for these speakers.
Surround Sound Setup:
- If you’re using the SR700 as part of a surround sound system, calibrate your AV receiver or processor to ensure that the speaker channels are balanced and aligned correctly.
Audio Source Selection:
- Use your AV receiver or audio source’s controls to select the desired audio input, whether it’s a movie, music, or other content.
Volume Control:
- Adjust the volume to your preferred listening level using the controls on your AV receiver or amplifier. Start at a lower volume and gradually increase it to avoid sudden loud sounds.
Safety Considerations
- Ensure that the speakers are securely mounted on the wall using the built-in Polyfix wall mount system. Follow the manufacturer’s installation instructions carefully to prevent accidents or damage.
- Use appropriate wall anchors and mounting hardware when attaching the speakers to the wall. Make sure the mounting surface is sturdy and can support the weight of the speakers.
- When connecting speaker wires, make sure the amplifier or receiver is powered off to prevent electrical shock.
- Ensure that the speaker wire connections are secure and free from loose strands that could cause short circuits.
- Check that your amplifier or receiver is compatible with the SR700 speakers in terms of power output and impedance. Using an amplifier that exceeds the recommended power range can damage the speakers.
- Keep children and pets away from the speaker installation area to prevent tampering with wires or the speakers themselves. Falling speakers can pose a safety hazard.
- Periodically inspect the speakers for any signs of wear, damage, or loose components. Ensure that the speaker grilles are securely attached.
- Clean the speakers and grilles as recommended by the manufacturer to maintain optimal sound quality.
- Avoid playing audio at excessively high volumes for extended periods, as it can damage your hearing and potentially harm the speakers.
- If you’re using the SR700 speakers as part of a surround sound system, calibrate your AV receiver or processor to ensure safe and balanced audio levels.
- Ensure that the speakers are not installed near open flames, heat sources, or in areas where they might come into contact with flammable materials.
- If you encounter any electrical issues, such as wiring problems or power surges, disconnect the speakers and consult a qualified technician or electrician.
- If you are unsure about any aspect of the installation or encounter issues, consider seeking assistance from a professional installer or technician to ensure safe and proper installation and operation.
- Ensure that the installation and use of these speakers comply with all local, state, and national regulations, including building codes and safety standards.
FAQs
What is the purpose of a sealed effect surround loudspeaker like the Focal Chorus SR700?
A sealed effect surround loudspeaker is designed to provide a high-quality and immersive audio experience, particularly in home theater setups. It complements the main front and center speakers by delivering surround sound effects, enhancing your overall audio immersion.
How do I mount the Focal Chorus SR700 speakers on the wall?
The SR700 speakers come with a built-in Polyfix wall mount system for easy installation. Follow the provided installation instructions to securely mount them on your wall. It's essential to use appropriate wall anchors and ensure a sturdy mounting surface.
Can I use the SR700 speakers as standalone speakers for stereo audio, or are they specifically for surround sound setups?
While the SR700 is optimized for surround sound applications, you can use them as standalone speakers for stereo audio if desired. They provide excellent sound quality and can be placed strategically for various audio experiences.
Are these speakers suitable for outdoor use, such as on a patio or in a covered outdoor area?
No, the Focal Chorus SR700 speakers are designed for indoor use and should not be exposed to outdoor elements, including moisture and humidity. They are intended for use in dry, indoor environments.
Do these speakers require professional installation, or can I install them myself?
These speakers are designed for user-friendly installation, especially with the built-in wall mount system. Many individuals can install them on their own, but if you have any doubts or specific installation needs, consider consulting a professional installer.
Can I paint the speakers to match my room's color scheme?
The speakers come in a black satin finish. If you wish to customize their appearance to match your room decor, you can consult the manufacturer's guidelines on painting speaker cabinets. Be cautious not to obstruct any speaker openings during painting.
What is the difference between sealed and ported speakers, and why choose a sealed effect loudspeaker like the SR700?
Sealed speakers, like the SR700, provide tighter and more controlled bass response compared to ported speakers. Sealed effect surround speakers are ideal for precise surround sound effects in home theaters, offering a well- defined audio experience.
Can these speakers be integrated into an existing home theater system with different brand speakers?
Yes, the Focal Chorus SR700 speakers can be integrated into an existing home theater system with different brand speakers, provided they are compatible in terms of impedance and power handling. Calibrating your AV receiver or processor can help ensure a balanced audio experience.
What is the recommended placement for surround speakers in a home theater setup?
The ideal placement of surround speakers depends on your room's layout and the specific recommendations provided by your AV receiver or processor. Generally, they are placed on the sides or rear of the listening area, slightly above ear level, for optimal surround sound effects.
Can I use the Focal Chorus SR700 speakers with a variety of audio sources, including movies, music, and gaming?
Yes, these speakers are versatile and can be used for various audio sources, making them suitable for movies, music, gaming, and other forms of entertainment.
What is the advantage of using sealed effect surround speakers in a home theater setup?
Sealed effect surround speakers, like the SR700, provide precise and controlled sound dispersion, enhancing the accuracy of surround sound effects. They are ideal for creating an immersive home theater experience.
Do I need an external amplifier or AV receiver to power these speakers?
Yes, you will need an external amplifier or AV receiver to power the Focal Chorus SR700 speakers. Make sure your amplifier or receiver's power output falls within the recommended range for these speakers.